Beli Peledakan Manik-Manik Kaca bekas (1.166)

Kondisi: baru, Tahun pembuatan: 2025, Shot blasting container for blasting with glass beads and ceramic balls, equipped with a drum magnetic separator and stainless steel grid floor. Internal dimensions: L=5850 mm, W=2300 mm. Side door opens for easy loading by forklift. Hsdpfxsg S Rt Te Al Iel

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Hodpfx Asxnlgcel Isl Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: baru, Tahun pembuatan: 2026, Number of motors: 2 units Working length: 3000 mm Control: Yes/CNC Loading dimensions L x W x H: 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Mitre Saw Exenso DS350E - 3000 mm ----- For wooden glazing bars, mullions, profile strips, aluminum strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length: 3000 mm - Swivel range: 22.5° (inside) to 135° (outside) - Right head traversable - Saw blade mounting Ø 350 mm - Including 1 pc. central support - Pneumatic clamping of units - Positioning control Exenso DS3 with touch panel 15" display in a dust-protected monitor housing - 3-axis control, 1 longitudinal axis and 2 swivel axes - Manual input of cutting data - Processing data from a cut list (record as specified) - Processing data from a measuring stick (wireless caliper GMF) - Ethernet connection 10/100 (TCP/IP) - USB interface - Including control cabinet, motor and software licenses Hjdpfeyy A Ikjx Al Iol Item 1.2 Article number 942.5203 DS feed unit, hydropneumatic Item 1.3 Article number 723.0121 2 pcs. DS Saw blade for wood Cross/flat tooth - positive Item 1.4 Article number 942.5236 2 sets DS workpiece clamping, combined Combined workpiece clamping consisting of: Pneumatic swing clamp for clamping material from above (free access to work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure plate Clamps can be selected individually via the saw’s control system Clamping sequence can also be set via the control system Includes safety pre-clamping pressure Scope of supply with 2 sets: - 2 pcs (left/right) vertical swing clamps - 2 pcs (left/right) horizontal clamps Item 1.5 Article number 942.5241 DS350 grooved table support (standard groove, special grooving per customer drawing upon request) Item 3.1 Article number 945.2007 DS350 packaging (transport frame) ----- Total price for this configuration ex works - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of offcuts with square-cut glazing bars instead of 2nd set Pos. 1.3 943.5236 DS Combined workpiece clamping! Item 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 pcs. anti-twist clamping cylinders - 2 pcs. cylinder supports with clamping lever ----- OPTIONAL accessories, with additional charge on request: ----- Item 4.3 Article number 942.5237 DS Software “Overlength” (subsequent steps must be confirmed) Process control incl. hardware. When entering a cutting dimension > maximum cutting length of the system, the cut is performed in steps. (Left unit cuts, right unit moves material and cuts to size.) ----- Item 2.1 Article number 944.1023 GMF Caliper 3000mm Complete set (1500mm plus 1500mm extension) incl. charger and receiver. A robust aluminum measuring rod with a measuring range of 3,000 mm, ideal for measuring glazing bars. Functionality For use on doors and large window sashes, the GMF caliper can be safely and quickly mechanically extended up to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic...

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Mesin hampir baru setelah likuidasi perusahaan. Hodpfx Aloyl R Uho Isl

Tahun pembuatan: 1992, Kondisi: baik (bekas), Aluminium circular saw, mitre saw, glazing bead saw, aluminium saw -Manufacturer: Alfred E. Gohl, Glazing Bead Saw Type GLS -Saw blade: Ø 225x2.0x32 mm -Drive: 1.1 kW Hsdeif Azfspfx Al Iel -Speed: 3000 rpm -Dimensions: 1100/650/H1350 mm -Weight: 152 kg

Tahun pembuatan: 1993, Kondisi: siap digunakan (bekas), de-01 Hedpfxoyv H Iae Al Iel

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Voltage: 380 V Power consumption: 3.5 kW Pressure: 6-8 bar Hsdpev S I Arofx Al Iol Blade motors: 2800 rpm, 0.75 kW Blade diameter: 250 + 175 mm Max. profile height: 40 mm Min. profile width: 100 mm Min. profile length: 350 mm Weight: 150 kg Dimensions: 1300 x 550 x 1250 (h) mm

Kondisi: bekas, Tahun pembuatan: 1997, nomor mesin/kendaraan: 971845, tegangan masuk: 400 V, Mesin dalam kondisi seperti pada foto, dilepas dari lini produksi, berfungsi. Hedpsw Ixn Uefx Al Iel

Tahun pembuatan: 1992, Kondisi: siap digunakan (bekas), de_1 Hjdeyh Nwdjpfx Al Ijl

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Hjdpfjwu Ez Nox Al Isl

Kondisi: baru, Number of motors: 2 units Working length: 2,650 mm Control: manual Ruchser RU-GLS-ED 45° Glass Beading Saw ----- Designed for paired cutting of glass beads The RU-GLS-ED45° Double Glass Beading Saw is manually adjustable to the desired size. The machine is designed for the paired cutting of glass beads at a cutting angle of 45° and is equipped with one fixed and one movable saw unit. The manual length adjustment is fitted with an electronic digital display. Cutting lengths from 150 mm to 2,650 mm can be processed. During cutting, the glass beads are clamped from above and from the front with a pneumatic clamping device to prevent tilting. Operation is via safety two-hand control. Saw blade diameter: 250 mm, length: 3,700 mm, width: 700 mm, voltage: 400 V. Hsdpfxsxmk Dqs Al Ijl Item 1: RU-GLS-ED45° Double Glass Beading Saw ----- with manual dimension adjustment, for paired cutting of glass beads, cutting angle 45°. Manual length adjustment with electronic digital display, cutting lengths from 150 to 2,650 mm. Pneumatic clamping from above and front. Safety two-hand operation, saw blade diameter 250 mm, length 3,700 mm, width 700 mm, voltage 400 V. ----- Base price for the above configuration: on request! ----- Ex works. Packing and shipping extra. Options and Surcharges: ----- Item 1.1: Shim set for rebated glass beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after examining the glass beads. Depending on the number of bead types used, multiple shim sets may be required. To determine the exact quantity required, we need profile drawings of the glass beads to be used before order confirmation. Surcharge: on request, after receipt of your bead drawings Item 1.2: Fixture for measuring gauge transfer for RU-GL to transfer the measured length to the saw, with pneumatic installation. Surcharge: 611.00 EUR Item 1.3: Measuring gauge for glass beads, total length 2,550 mm, max. measuring length approx. 2,450 mm Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for scanning glass bead length Surcharge: 478.00 EUR Item 1.4: Measuring gauge for glass beads, total length 1,500 mm, max. measuring length approx. 1,430 mm Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for scanning glass bead length Surcharge: 428.00 EUR Item 1.5: Operating time switch for independent extraction Adjustable from 5 sec. to 3 hours. With every sawing operation, extraction runs automatically for the pre-set time. If another cut is made during this period, the timer resets. Surcharge: 702.00 EUR Item 1.6: 1 set of carbide saw blades for RU-GLS-P45 and RU-GLS-ED45°, D = 250 mm x 3.2/2.2 x 30, 80 teeth, consisting of 1 piece saw blade L6444 (right) and L6443 (left), special 43° grind. Surcharge: 576.00 EUR ----- All prices in EUR, net, plus VAT. (Technical information according to manufacturer, without guarantee!)

Kondisi: baru, Number of motors: 2 units Working length: 2380 mm Control: , RUCHSER RU-GL-45° ----- Glass Bead Saw on Sliding Work Table Designed for cutting pairs of glazing beads on the sliding work table. The RU-GL glass bead saw is mounted on a sliding work table with a scanning and clamping unit for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw manually movable on a carriage. Pneumatic clamping from above and from the side, two-hand safety operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt top, total length with side storage shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for positioning sashes. Item 1: RU-GL Double Glazing Bead Saw 45° on RU-SA-3000 ----- For glazing beads up to 30 x 70 mm (W x H)!!!, mounted on sliding work table with scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw manually movable on carriage. Pneumatic clamping from above and from the side, two-hand safety operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt top, total length with side storage shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter supports for sash positioning. ----- Base price as specified above: on request! ----- Plus packaging and shipping, as well as current material surcharge of 6% of the total price Options with surcharge: ----- Item 1.1 1 set of carbide saw blades for RU-GL glass bead saw D = 200 mm, 64 teeth, consisting of 1 left (L1233) and 1 right (L1085) saw blade, with special 43° grind. Surcharge: 421.00 Euro Item 1.2 Adapter for scanning gauge for RU-GL for transferring scan dimensions to the saw with pneumatic installation. Surcharge: 611.00 Euro Item 1.3 Scanning gauge for glazing beads, total length 2550 mm, max. measured length approx. 2450 mm. Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for measuring glazing bead length. Surcharge: 478.00 Euro Item 1.4 Scanning gauge for glazing beads, total length 1500 mm, max. measured length approx. 1430 mm. Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for measuring glazing bead length. Surcharge: 428.00 Euro Item 1.5 Spacer set for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after review of glazing beads. Depending on the number of glazing bead types used, several spacer sets may be required. To determine the required quantity, please provide profile drawings of the glazing beads to be used prior to order confirmation. Surcharge: on request, following submission of your glazing bead drawings Item 1.6 Operating time switch system for independent extraction. Adjustable from 5 seconds to 3 hours. For each sawing operation, suction is automatically activated for the set time. If another cut is made during the suction time, the timer resets and starts again. Surcharge: 702.00 Euro ----- Hsdpfsxmkz Njx Al Iol Total price ...

Kondisi: bekas, Tahun pembuatan: 2018, hecht-es-350-glasleistensaege-de Hedpfxevpr N Rj Al Iol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 403 6274, berat keseluruhan: 297 kg, Dimensions: Machine width: approx. 700 mm Machine depth: approx. 1,350 mm Machine height: approx. 1,250 mm Weight: approx. 250 kg Cutting angle: 45° Tools used: All milling and cutting tools must comply with DIN EN 847-1 standard and be appropriately matched in working speed to the spindle motor rotational speed. Cutter: Ø 150x30x3.0 mm, 32 teeth Saw blade: Ø 300x30x2.6 mm, 96 teeth GLA 403 OPERATING MANUAL Copyright © by FM ROTOX Sp. z o.o. Page: 14 Hsdpfewhpp Rox Al Iel Workpiece material: PVC glazing beads: Profile length: min. 200 mm (depending on length stop) Profile height: min. 5 mm, max. 50 mm Profile width: min. 10 mm, max. 50 mm Tool clamping: Pneumatic Electrical: Connection: 400V, 50Hz (AC) Power consumption: 2.2 kW Fuse protection: 16A (slow-blow) Saw motors: 230/400V; 4.0/2.3A, 1.1 kW; 50Hz; 2860 rpm Pneumatics: Operating pressure: 5–6 bar Minimum pressure during operation: 5 bar Maximum pressure: 6 bar Air consumption: approx. 15 l/min per saw movement Connector: NW Ø 9 mm Permitted operating temperature: min. 15°C, max. 40°C

Kondisi: baru, Tahun pembuatan: 2025, Blast room 7 x 4.5 m with extraction floor for mineral blasting media (glass, ceramic, corundum, garnet sand, etc.). Magnetic separator, cyclone, recycling unit, material bunker, Hodpfx Ajd Naafol Isl blast media refilling, pressure blast pot, filter system with pulse jet cleaning. Walls lined with 4 mm fabric-reinforced rubber. Roof hatch for crane loading. For questions regarding technical specifications, please contact us in writing or by phone. The foundation of all our equipment is based on manufacturing at our Grossenlueder facility since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the long-standing, well-known contacts.

Tahun pembuatan: 2018, Kondisi: seperti baru (mesin pameran), GLSM-200E Glazing Bead Saw Hsdpfx Aleuxxxj Iel Manual saw feed Pneumatic clamping device (4 units) Adjustable table height 2 x motors fixed at 45° Accessories: TCT saw blade 200 x 2.2 x 32mm, Z=100 TCT saw blade 103 x 2.1 x 32mm, Z=60/45° left TCT saw blade 103 x 2.1 x 32mm, Z=60/45° right VARIO measuring bar 1.5m VARIO measuring bar 3.0m Support for measuring bars 3.0m

Tahun pembuatan: 2023, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, de Hodpfoyz Hzqox Al Isl

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), Batch-Kugelmühlen finden in verschiedenen Branchen Anwendung, in denen Materialien chargenweise verarbeitet werden müssen. Ihre Vielseitigkeit macht Batch-Kugelmühlen für eine breite Palette von Einsatzbereichen geeignet. Nachfolgend sind gängige Anwendungsgebiete von Batch-Kugelmühlen aufgeführt: 1. Keramikindustrie: - Glasurzubereitung: Batch-Kugelmühlen werden in der Keramikindustrie häufig zur Herstellung von Glasuren eingesetzt. Rohstoffe wie Feldspat, Quarz und Ton werden gemeinsam mit keramischen Mahlkugeln gemahlen, um die gewünschte Partikelgröße für die Glasurformulierung zu erreichen. 2. Chemische Industrie: - Materialvermahlung: In der chemischen Industrie finden Batch-Kugelmühlen für das Mahlen und Mischen verschiedenster chemischer Stoffe Verwendung, z.B. bei der Herstellung von Pigmenten, Farbstoffen und Spezialchemikalien, bei denen eine präzise Partikelgrößenkontrolle erforderlich ist. 3. Pharmazeutische Industrie: - Arzneimittelherstellung: In der pharmazeutischen Industrie werden Batch-Kugelmühlen zum Mahlen und Mischen von Pulvern zur Herstellung von Arzneimittelrezepturen eingesetzt. Die kontrollierte Umgebung der Mühle ist essenziell zur Sicherung der Wirkstoffintegrität. 4. Lebensmittelindustrie: - Zutatenmischung: Auch in der Lebensmittelindustrie können Batch-Kugelmühlen zur Mischung und Vermahlung von Zutaten eingesetzt werden, beispielsweise bei der Produktion von Lebensmittelzusatzstoffen, Aromen und anderen pulver- oder granulatformigen Produkten. 5. Bergbau und Mineralaufbereitung: - Erzvermahlung: In der Aufbereitung von Erzen und Mineralien dienen Batch-Kugelmühlen dem Mahlen der Rohstoffe, wodurch die Partikelgröße für nachgelagerte Prozesse (z.B. Mineraltrennung oder -extraktion) präzise eingestellt werden kann. 6. Farben- und Lackindustrie: - Pigmentdispersion: Zur Dispersion von Pigmenten in Farb- und Lackformulierungen kommen Batch-Kugelmühlen zum Einsatz. Eine gleichmäßige Partikelverteilung ist entscheidend für Qualität und Optik der Endprodukte. 7. Baustoffindustrie: - Rohstoffvermahlung: Batch-Kugelmühlen werden bei der Aufbereitung von Rohmaterialien wie Kalkstein und Ton für die Herstellung von Baustoffen (z.B. Zement und Beton) eingesetzt. Durch das Mahlen wird die benötigte Feinheit erreicht. Hsdpfx Asq I N H Njl Isl 8. Elektronikwerkstoffe: - Keramikpulveraufbereitung: In der Elektronikindustrie dienen Batch-Kugelmühlen zur Aufbereitung von Keramikpulvern, die bei der Herstellung elektronischer Bauteile und Isolationsmaterialien benötigt werden. 9. Forschung und Entwicklung: - Materialprüfungen: Für Tests und die Optimierung von Materialzusammensetzungen kommen Batch-Kugelmühlen häufig in F&E-Labors zum Einsatz. Sie ermöglichen Kleinchargenverarbeitung unter kontrollierten Bedingungen. 10. Individuelle Anwendungen: - Spezialisierte Prozesse: Batch-Kugelmühlen können für verschiedene spezielle Prozesse in unterschiedlichen Branchen angepasst werden, wenn exaktes Mahlen und Mischen gefragt ist. Individuelle Modifikationen sind je nach Spezifikation realisierbar. Beim Einsatz einer Batch-Kugelmühle sollten u.a. die Art des zu vermahlenden Materials, die gewünschte Partikelgröße und die spezifischen Anforderungen des Endprodukts beachtet werden. Zudem ist die Einhaltung der Herstellervorgaben und die Sicherstellung optimaler Betriebsbedingungen entscheidend für einen effizienten und effektiven Mahlprozess. Technische Details: Wir bieten verschiedene Ausführungen für unterschied

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, VERTICAL ELECTRONIC GLASS DRILLING MACHINE MODEL: PRIAM YEAR OF MANUFACTURE 2026 / BRAND NEW The Priam model is a vertical glass drilling machine with two drilling spindles (double-sided), developed for customers seeking a functional and user-friendly device that is also highly durable. In designing this machine, we relied on traditional engineering principles: heavy, heat-treated steel frames with mechanical solutions that ease future operation and maintenance. This alternative approach to machine engineering and manufacturing ensures our machine can drill glass reliably for years, guaranteeing an excellent return on investment. To guarantee components are manufactured with the utmost care, our glass drilling machines are produced in Poland, in cooperation with local partners. The main frame of the machine is fabricated in-house and subsequently heat-treated and further finished by local shops. This way, the entire production process remains under our direct supervision, allowing any defects to be detected and rectified before delivery to the customer. In doing so, we also support the regional machinery industry. The assemblies that comprise the machine adhere to the highest European standards. Our suppliers include: SIEMENS, HITACHI, UNITRONICS, SCHNEIDER, GARLOCK. Mechanical components are readily available, and can be replaced quickly and easily during machine operation. Hodpfogq Dl Aex Al Iol Expoglass Priam – Glass drilling machine – Top-level functionality ⦁ 2 drilling spindles (front and rear spindle). These allow glass sheets to be drilled through in a single operation without the need to turn them over. ⦁ Electronically controlled loading rail. To set the distance between the bottom glass edge and the drill hole, simply enter the desired measurement on the touchscreen; the machine will automatically move into position. ⦁ Quick-change drill bit mode. Once the driller change button is pressed, both spindles are locked automatically (cannot be rotated). The vertical plate between the drillers lowers, creating ample space between them. Drill bits can then be removed without tools, with plenty of room for easy, convenient access. ⦁ Automatic (electronic) drill length and position measurement. Upon finishing a drill change, the machine automatically calibrates, measuring the drill length. This enables the machine to determine the exact distance between the glass sheet and each drill tip. Essential for small-scale operations with one-off drilling rather than batch production. ⦁ Automatic (electronic) detection of spindle depth position. After automatic spindle calibration and clamping of the glass sheet, the machine measures the glass thickness and adjusts the drilling depth accordingly. The operator only needs to press the “Drill” button—the process is then fully automatic.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lebar total: 1.860 mm, panjang total: 2.800 mm, tinggi total: 910 mm, berat keseluruhan: 600 kg, arus masuk: 16 A, masa garansi: 12 bulan, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, frekuensi input: 50 Hz, CUTTING TABLE – FOR MANUAL GLASS CUTTING – NEW MODEL: SDRM FULL Year of manufacture: 2026 - brand new We are a manufacturer of glass cutting tables with a range of features. Our products are distinguished by their highest functionality and durability, which comes from our own experience working with flat glass, so we know exactly what customers expect from such machines. Our glass cutting tables have been in use for several years in glass processing companies on three continents. Our many years of experience enabled us to develop equipment whose functionality and quality precisely meet the highest demands of our customers. GLASS CUTTING TABLE EQUIPMENT: - Manually extendable support arms for vertical loading (covered with interchangeable ash wood blocks) - 4 heavy-duty swivel castors Ø80 mm made of polyamide for moving the table - 4 height-adjustable feet for precise horizontal alignment at the workstation - Table surface: high-durability black felt - Table edge lined with milled ash wood strips - 2 steel plates bolted underneath the table for easy unloading using a forklift - The lower frame girder is filled with vibrated concrete incl. steel reinforcement and dispersed polypropylene fiber reinforcement to ensure stability and rigidity of the structure - Tilt movement (vertical and horizontal positioning of the table top) via pneumatic cylinder incl. hydraulic speed control valve - Pneumatically controlled breaking bars (for longitudinal and cross breaks) operated by foot pedal, which is mounted on a retractable and self-returning pedal platform - Air cushion system with built-in high-pressure blower allowing easy handling of heavy glass sheets on the table top (blower is activated via a foot pedal on the console and via two additional switches built into the table edge, blowing air under the glass sheets to significantly reduce friction) - The breakout bar projection height above the table top is adjustable TECHNICAL MAIN DATA: Weight: 600 kg Table dimensions: 280 cm x 186 cm Height: 91 cm (adjustable +/- 2 cm) Electrical connection: 16 A 5-pin plug Hedpfsd Tamdox Al Ijl Compressed air connection: standard 7.2 NW Operating air pressure: 7 bar Blower power: 2.2 kW Voltage: 400 V 50 Hz DOCUMENTS SUPPLIED WITH THE MACHINE: - Declaration of conformity (machine complies with machinery directives) - CE marking - EMC Directive declaration of conformity - 12 months warranty - Operating manual (in Polish and English) The product is delivered fully operational. Our company supplies glass cutting tables also within the EU and to other countries.

Kondisi: bekas, Tahun pembuatan: 2016, GFPM SFV 2500 – Tahun 2016 Hodpfx Aoy If Ddel Iel Mesin Facet (Arrising) Dimensi Maksimal: 2500 x 3500 mm Dimensi Minimal: 270 x 400 mm Ketebalan: 4-22 mm Kecepatan: 5-25 m/menit Waktu Kerja: 15 detik/m² Daya: 18 kW

Kondisi: bekas, FOREL Lini Produksi Kaca Insulasi - Mesin Pencuci (6 sikat) FOREL VW2500 (2009) - Pemindai LISEC (2014) Hjdpey If Aysfx Al Isl - Gas Press FOREL APG 250 (2009) Arah kerja: Kanan ke Kiri

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, BAVELLONI GEMY 11 - Tahun 2002 Mesin edging garis lurus, 11 roda Ukuran minimum yang dapat dikerjakan: 35 x 35 mm Hjdey Ibt Iopfx Al Iol Ketebalan: dari 3 hingga 40 mm Daya: 22 kW Kecepatan: dari 0,5 hingga 5 m/menit Meter Linier yang Sudah Dikerjakan: 230.810

Kondisi: bekas, Tahun pembuatan: 1993, Blechstärke max. 3 mm Hsdpfx Aley Iha Uj Iel

Kondisi: baru, Arbeitslänge 2750 mm Arbeitshöhe 2500 mm Hub des Arbeitstisches 300-1000 mm RUCHSER Glazing and Sealing Table RU-SW3-90° ----- Vertical work table with lifting mechanism and tilting device. Particularly suitable for glazing and double-sided sealing of wooden windows. Features: • Workpiece support surface covered with felt • Stepless pneumatic lifting mechanism, stroke from 300 mm to 1000 mm, referenced from roller conveyor height • Tilting device for double-sided sealing, with conveyor rollers, 150 mm roller length • 2 pneumatic clamps for securing the window in the tilting device • Version with special tilting device allowing window to be pushed through on roller conveyor while tilting device is closed Hodpfx Asxmk D Rsl Ijl Alternative/optional configurations available on request! Pos. 1.0: Article No.: 100000 RU-SW3-90° Vertical Work Table for Wooden Windows with Tilting Device for Glazing and Double-sided Sealing Angle section length: 1970 mm, opening angle 90°, max. working width: 2750 mm, total length: 3050 mm, total width: 780 mm, support height: 1600 mm, support surface with felt, with a roller (left OR right) as edge protection for items up to 2500 mm high. Pneumatic lifting mechanism from 300 to 1000 mm. Setup surface as roller conveyor with steel rollers, roller length and spacing 200 mm. ----- Total price for this configuration: on request! ----- Options with additional charge: Pos. 1.1: Article No.: 5202 EUR 773.00/each Support element fitted with rubber rollers Ø 48 mm, spacing 50 mm, for RU-SW3-90° and RU-SWS3 Pos. 1.2: Article No.: 7081 EUR 440.00/each Steel angle bar covered with felt, mounted above the roller strips, for RU-SW3-90°. Prevents “rattling” of windows during movement. The additional strips are mounted above all roller strips of the RU-S2. Pos. 1.3: Article No.: 5056 EUR 147.00/each RU-AK-6 storage box 1000 x 120 mm, 6 compartments, for hanging on the roller conveyor ----- Total price for this configuration: on request! Ex works, plus packaging and shipping, plus statutory VAT. PDF brochure attached. (Technical data as per manufacturer's information – subject to change without notice!)