Beli Pemeriksaan Mesin Untuk Granulates bekas (82.151)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, jam operasional: 216 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, A refurbished and fully operational profile extrusion line, comprising the following components: Twin-screw extruder, parallel design Manufacturer: Hans Weber Maschinenfabrik Model: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for rigid PVC powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx. 30 rpm Screw torque: 10,000 Nm Motor power: 3.8 - 23.0 kW Drive motor: Commutator motor Elektra Faurndau Barrel heating/cooling zones: 4/2 (air-cooling by fan) Tool heating zones: 8 Temperature controllers: 12 x digital controllers PMA, type: KS40 Connected load: approx. 60 kW (without tooling) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for rigid PVC profiles Special accessories: melt pressure sensor and melt temperature probe Accessories: material hopper and connection flange Accessories: vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: In 2022, a new electrical control cabinet was installed. Since then, the extruder has only run for 216 hours. Condition: refurbished and function-tested Vacuum calibration unit Manufacturer: Blake Kunststoffproduktionsanlagen Model: 203-3-4.0 Year of manufacture: 1997 Total length: 5600 mm Profile width: max. approx. 500 mm Vacuum pumps: 3 units (each 5.5 kW) Longitudinal adjustment: electric motor-driven Height/cross adjustment: front and rear via threaded spindle and handwheel Stainless steel tray: inside width 450 mm, outside width 700 mm Tray length: 4500 mm Connected load, total: approx. 20 kW Dimensions: 5600 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: refurbished and function-tested Belt haul-off Manufacturer: Blake Kunststoffproduktionsanlagen Model: 303-1600-270 Year of manufacture: 1997 Belt width: 300 mm Clear passage width: max. 500 mm Clear passage height: 100 mm Effective clamping length: 2400 mm Haul-off speed: max. 8.0 m/min Haul-off force: approx. 40,000 N Drive motor: DS motor, 7.5 kW Motor control: frequency inverter Belt clamping: pneumatic, front and rear Extrusion height: 1000 – 1200 mm Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: refurbished and function-tested Hnodpfx Aaex Rx D As Nog Note: We also offer the vacuum calibration unit including the belt haul-off for sale separately.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, en Hnodpex Rz Dxefx Aa Njg

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale is a 6-axis loading robot from Erowa, previously used to load two Ingersoll sinker EDM machines with both tools and workpieces. The Ingersoll machines are also for sale and can be offered as a package deal. Hjdstdrkqspfx Aa Neng Technical specifications: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350° A-axis: +/-180° B-axis: +/-90° Y-axis: 1.1–18.74 m Dismantling, loading, and European-wide shipping can be organized for an additional fee. Prices are subject to VAT. Viewing by appointment possible. Contact us—our team will be happy to assist you. Trade-in or swap possible! Machinery purchase / sale BUYING AND SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to get in touch, please visit our website.

Kondisi: baik (bekas), Double-end tenoner, edge processing machine, scribing motor, cutting motor, electric motor, spindle motor, milling motor - Power: 3.7 kW 2880 rpm at 50 Hz - Power: 5.2 kW 5870 rpm at 100 Hz - Voltage: 220/380 Volt Hjdpfx Ajb A Hl Nja Njng - Shaft Mount: Ø 40 mm - Tool: electrically traversable - Tool: Ø 180 x 28–48 mm - Dimensions: 830/400/H200 mm - Weight: 70 kg

Kondisi: baik (bekas), 0471 Hnedpfxox I A Rnj Aa Nsg

Tahun pembuatan: 2025, jam operasional: 12 h, Kondisi: baru, Mesin bor frontal otomatis untuk pengeboran kaki pada sudut berbeda, dengan meja bandul. Pengeboran tiga kali dengan ekstraksi serpihan. Mesin dapat bekerja dalam berbagai pengaturan dan konfigurasi. Digunakan untuk pengeboran tembus. Hodpoxb Elxsfx Aa Nong

Kondisi: sangat baik (bekas), Instalasi pencuci untuk gergaji dan alat Rotatherm Hodpfx Ajxw H Tvea Neng

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20170259471, panjang total: 22.000 mm, tinggi total: 2.000 mm, lebar total: 2.000 mm, panjang kabinet kontrol: 2.400 mm, lebar kabinet kontrol: 400 mm, masa garansi: 12 bulan, tinggi kabinet kontrol: 2.200 mm, tahun perombakan terakhir: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine no.: 20170259471 - Year of manufacture: 2017 - BVM ref. no.: 5947 - Voltage, frequency: 3N 400V, 50Hz - Power rating: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system "Comtex 4G Shipping" is the complete solution for bag shipping of a wide variety of items directly to the customer, including addressing. Delivery note, invoice, and goods are packed together in a snug PE film bag, labeled with the address, and handed directly to the respective logistics partner. Technical data: - Seal width: 750 mm transverse, 800 mm longitudinal - Product height: up to 250 mm - Output: up to 25 cycles/min* (Special) Equipment: - Special color - Signal control light, 3 colors for indicating fault messages - Pneumatically operated pre-storage plate and presence check for the film collection tray, allowing replacement of the film tray during automatic operation (machine does not need to be stopped). Note: At this position, the working height of the Comtex is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo operation: stepless speed adjustment). - Film end detection via ultrasonic sensor, including analog input card (1 per film carrier) - Mechanical distribution device for film waste strips in conjunction with a large film waste strip storage - Numbering of individual wires in the control cabinet for Comtex 3G and Comtex 4G - Grooves in the aluminum profile covered with plastic profile - Bypass conveyor as a hinged belt in the Comtex after the side sealing station for transferring products from the machine. - Film folding device without separate control for processing flat film into centrally folded film - Film sealing unit for flat films - PN / PN coupler (Profinet coupler) for establishing a Profinet connection. - Software development for the PN / PN coupling consisting of release connection, interlocking, and combined fault message. - Film end control at the film feeder and film level detection at the film winder via photoelectric sensors, including 3-color signal lamp and acoustic signal. - Mounting preparation for labeler, suitable models upon request, installed at the infeed, including electrical and pneumatic connection. - Sealing bar for producing a wide seal seam with separate cold-knife cut suitable for Comtex 3G, 4G, and Compacta with EGS. - Manual labeling device with linear movement (Model: Caljan Type: FPS BVM L113 L) - Resealable film bag by double-sided adhesive tape within the film bag, incl. tear-open perforation wheel. - Additional tear-open perforation wheel. This enables the entire rim area of the bag to be removed. - Standalone control cabinet for Comtex with 5 meter cable. - Two consecutive indexing conveyors (600 x 900 mm / 600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with recess for installation of a scanner or camera including trigger light curtain for scanner - Height adjustment of transverse sealing for a passage height of 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for inspection Hnedpfx Aew Ryt Dja Neg +++Fully refurbished unit with 12 months warranty according to the attached warranty conditions+++

Kondisi: baik (bekas), Tahun pembuatan: 1998, Universally usable frame dowel and slot mortising machine with angle adjustment. Especially suitable for staircase construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Angled doweling and spindle boring are easily achievable thanks to the swivel drilling unit. Motor with pole-reversal, two speeds Motor output: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start by practical handle switch Equipped with Röhm 2-jaw chuck 1 - 20mm Linear laser for precise workpiece positioning Drilling unit swivels 65 degrees left and right Pneumatic adjustment of working height; doweling on two levels without resetting Desired drilling heights per level can be set via digital counter, switching is pneumatic from the front Cross adjustment of 340mm, stepless or in 12mm increments using rack bar Pneumatic clamping possible at any position, operable from the front Max. height adjustment approx. 100mm above table height Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front 2 swiveling workpiece supports Extraction funnel Center stop + 1 side stop Fixed mitre stop Length stop as round bar Assorted drill bits Operating manual CE mark The machine has been partially repainted due to existing paint splashes. Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600mm (LxWxH), weight 380 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see 'more offers from this provider.' Hodpfjxmatnox Aa Neng

Kondisi: baik (bekas), Double-end tenoner, edge processing machine, scoring motor, machining motor, milling motor, spindle motor - Power at 50 Hz: 4.4 kW, 2890 rpm - Power at 100 Hz: 6.6 kW, 5860 rpm - Shaft diameter: Ø 35 mm - Tool diameter: Ø 250 mm - Quantity: 3 motors available - Price: per unit (other types of motors available upon request) - Dimensions: 560/240/H160 mm - Weight: 50 kg Hsdpfx Aaob A Idie Nong

Kondisi: baik (bekas), 0042 Hodpfov Ay Hkex Aa Neng

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.600 mm, jumlah silinder: 4, Press hidrolik untuk penekuk ITALPRESSE MOD. PHF60 – sesuai standar CE - 4 silinder diameter 100 mm Hjdex Rdkbepfx Aa Njng - Ukuran meja: 1600x1100 mm - Bukaan maksimum: 110 mm - Tahun pembuatan: 2001.

Kondisi: baik (bekas), Double-end tenoner, edge processing machine, scribing motor, cutting motor, electric motor, spindle motor, milling motor Hsdpfx Asb A Nl Uea Nsng - Motor: 1.5 kW, 2840 rpm at 50 Hz - Shaft diameter: Ø 15 mm - Weight: 12 kg

Kondisi: baik (bekas), Double-end tenoner, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor - 2x Motor: 0.4 kW, 20 mm shaft, 11,300 rpm at 200 Hz - Motor: mounted on guides - Motors: swiveling Hodpfx Aajb A Im Rj Njng - Cutters: with indexable inserts - 3x Consoles: each equipped with 2 motors - Price: per unit - Weight: 60 kg per unit

Kondisi: baik (bekas), Double-end profiler, edge processing machine, scoring motor, machining motor, milling motor, spindle motor - Power: 0.4 kW, 12,000 rpm at 200 Hz - Power: 0.60 kW, 16,500 rpm at 300 Hz - with indexable insert milling cutter Hjdpfxsb A Igpj Aa Njng - Quantity: 4 motors available - Price: per piece - Weight: 6 kg each

Kondisi: baik (bekas), Double-end profiler, edge processing machine, scribing motor, cutting motor, spindle motor, milling motor Hedpob A Ix Tsfx Aa Njng - 1x Motor: 1.5 kW, 2740 rpm at 50 Hz - Shaft mount: Ø 20 mm / M16 mm - Motor: mounted on guides - Travel path: 160 mm - Weight: 30 kg

Kondisi: baik (bekas), Double-end tenoner, edge processing machine, scribing motor, cutting motor, electric motor, spindle motor, milling motor Hnodpfob A Nmdjx Aa Njg - 1x Motor: 1.5 kW, 2770 rpm at 50 Hz - Arbor: Ø 30 mm - Motor mounted on guides - Quantity: 2 motors available - 1x: right-hand thread - 1x: left-hand thread - Price: per piece - Weight: 20 kg/piece

Kondisi: baik (bekas), Double-end profiler, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor - Motor: 2.2 kW 2820 rpm at 50 Hz - Motor: 4.2 kW 5810 rpm at 100 Hz - Shaft mount: Ø 30 mm - Overall dimensions: 340/130/H220 mm Hnjdpfx Ajb A Nl Ioa Neg - Weight: 18 kg

Kondisi: baik (bekas), Double-end tenoner, edge processing machine, scoring motor, cutter motor, electric motor, spindle motor, milling motor -1x Motor: 0.3 kW 12,000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on linear guides Hodpfxsb A Nlxs Aa Nsng -Quantity: 3x motors available -Price: per unit -Weight: 5 kg/unit

Kondisi: baik (bekas), Double-end tenoner, edge processing machine, scribing motor, cutting motor, electric motor, spindle motor, milling motor -1x Motor: 0.7 kW, 11,400 rpm at 200 Hz Hnsdpfxeb A Nm Sj Aa Nsg -Voltage: 220 V -Mount: Ø 20 mm -Weight: 5 kg

Kondisi: baik (bekas), Double-end profiler, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor - Power output: 1.5 kW, 18,000 rpm at 300 Hz - Shaft mounting: Ø 20 mm - Quantity: 1x motor available Hnedjb A Nmpopfx Aa Njg - Weight: 10 kg

Kondisi: baik (bekas), Three-phase motor, electric motor, double-end profile cutter, edge processing machine, scoring motor, machining motor, spindle motor, milling motor - Power output: 1.49 kW - Speed: 2800 rpm - Shaft: Ø 15 x 25 mm Hnsdpfx Aaeb A Nnzj Neg - Design: B5 - Protection class: IP 54 - Price: per unit - Quantity: 3 units - Dimensions: 320/130/H155 mm - Weight: 13.7 kg/unit

Kondisi: baik (bekas), Double-end profiler, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor - 1x Motor: 0.3 kW, 18,000 rpm at 300 Hz - Voltage: 200 V - Arbor diameter: 16 mm - Weight: 5 kg Hnjdpfxob A Nnre Aa Neg

Kondisi: baik (bekas), Double-end profiler, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Hnsdpfxob A Nnqs Aa Nsg - 1x Motor: 0.3 kW 17,300 rpm at 300 Hz - Voltage: 165 V - Mounting diameter: 20 mm - Weight: 4 kg

Kondisi: baik (bekas), Double-end profiler, edge processing machine, scoring motor, machining motor, electric motor, spindle motor, milling motor - Motor: 0.40 kW, 12,000 rpm at 200 Hz - Motor: 0.55 kW, 18,000 rpm at 300 Hz - Tool holder: collet chuck - Weight: 4 kg Hnedpfx Asb A Nnpsa Nsg