Beli Pvc bekas (964)

Tahun pembuatan: 2004, Kondisi: baik (bekas), Rangka mesin DG 104 M dari pelat baja (panjang potong 6.000 mm) Batang pengangkat berprofil Penyangga benda kerja yang dapat bergerak atau ditarik otomatis Unit penjepit material Penahan silang dan penahan pemotongan di kepala Sambungan pembuangan, sistem ekstraksi Sistem jam Konveyor rol Mata gergaji Cairan pemotong berkinerja tinggi Klsdpfx Asx Rinroa Njl

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, jam operasional: 216 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, A refurbished and fully operational profile extrusion line, comprising the following components: Twin-screw extruder, parallel design Manufacturer: Hans Weber Maschinenfabrik Model: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for rigid PVC powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx. 30 rpm Screw torque: 10,000 Nm Motor power: 3.8 - 23.0 kW Drive motor: Commutator motor Elektra Faurndau Barrel heating/cooling zones: 4/2 (air-cooling by fan) Tool heating zones: 8 Temperature controllers: 12 x digital controllers PMA, type: KS40 Connected load: approx. 60 kW (without tooling) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for rigid PVC profiles Klodpfx Aaox Rx D Ao Nsl Special accessories: melt pressure sensor and melt temperature probe Accessories: material hopper and connection flange Accessories: vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: In 2022, a new electrical control cabinet was installed. Since then, the extruder has only run for 216 hours. Condition: refurbished and function-tested Vacuum calibration unit Manufacturer: Blake Kunststoffproduktionsanlagen Model: 203-3-4.0 Year of manufacture: 1997 Total length: 5600 mm Profile width: max. approx. 500 mm Vacuum pumps: 3 units (each 5.5 kW) Longitudinal adjustment: electric motor-driven Height/cross adjustment: front and rear via threaded spindle and handwheel Stainless steel tray: inside width 450 mm, outside width 700 mm Tray length: 4500 mm Connected load, total: approx. 20 kW Dimensions: 5600 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: refurbished and function-tested Belt haul-off Manufacturer: Blake Kunststoffproduktionsanlagen Model: 303-1600-270 Year of manufacture: 1997 Belt width: 300 mm Clear passage width: max. 500 mm Clear passage height: 100 mm Effective clamping length: 2400 mm Haul-off speed: max. 8.0 m/min Haul-off force: approx. 40,000 N Drive motor: DS motor, 7.5 kW Motor control: frequency inverter Belt clamping: pneumatic, front and rear Extrusion height: 1000 – 1200 mm Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: refurbished and function-tested Note: We also offer the vacuum calibration unit including the belt haul-off for sale separately.

Kondisi: baik (bekas), nl-hu-10-azo-rvs-silos Kjdpsx E U Hcefx Aa Njll

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, IPM-TP 90-500 MESIN GERGAJI PIPA untuk PIPA PVC Gergaji planet Aplikasi: PIPA PVC Memotong dan memfaskan pipa PVC, PE, PP Dengan kipas ekstraksi serbuk Diameter min. 100 mm Diameter maks. 500 mm Tahun pembuatan: 2009 Dengan penjepit sentral Lokasi mesin: Sachal Extrusionsmaschinen Kjdpsxwd Spofx Aa Nell D-26345 Bockhorn-Grabstede Bahnhofstraße 6 Mesin ini adalah milik saya.

Kondisi: baru, Tahun pembuatan: 2025, agri-machinery-hu-01 Klodpfoxdciasx Aa Nsl

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Las: FUSION 4H Unit pelepasan panel Kjdpfsxzzxbex Aa Nell Modul pengefraisan pertama Q-MATIC 1 Koneksi serial antara mesin las dan pembersih Meja putar Mesin pembersih (model kedua) TRIMMER 4A Meja ekstraksi Modul pengefraisan kedua (INTEGRA Q2) Q-MATIC 2 Laptop pengawas lini

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Clamping force: 50 t Screw diameter: 20 mm Type: Vertical Kljdpfx Aaswzmdxo Njl Drive: Hydraulic

Kondisi: baik (bekas), Tahun pembuatan: 2021, Automatic machine for manufacturing PVC tarpaulin roofing for tent halls – sold for parts. A tarpaulin welding machine of Italian manufacture, brand SolarEdge Automation Machines, produced in 2021. The machine was used to a very limited extent for the production of PVC coverings for tent halls. Machine specifications: - Material: PVC with a weight of 450 g/m2 - Material data: max. width – 3250 mm, min. width – 285 mm, max. roll weight – 1000 kg, max. outer diameter – 600 mm - PVC or PE keder ropes with diameters of 4/5/7 mm - Minimum product length: 1500 mm - Minimum final product width: 800 mm - Power supply: 400V The machine welds the surface of two materials from the feed roll, cuts them to the required width, and applies and thermally welds the keder cord alongside the edges of the material. The machine consists of: Kodpfx Asx Dk H Tja Nell - 2 material feeders with automatic material position adjustment - Knives for cutting the material to the required width - A welding module for joining two material panels - Modules for sealing the keder tape along the sides of the material - A module for feeding and welding the keder cord with automatic keder tension regulation - Encoder for product length control - Cutting knife for trimming the product to the desired length Welding is achieved using high-performance Leister hot air heaters. The machine features: 1. Leister heaters and blowers 2. Omron and Siemens control, electrics and safety components 3. Seipee and Nidec drives and gearboxes 4. Festo and SMC pneumatics 5. HIKVISION vision system 6. HIWIN linear guides and carriages Sale only as a complete unit!

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Pengelasan 90° dan kemungkinan pengelasan dengan sudut mulai dari 40° hingga 180°. Batasan ketebalan seal las standar (2 mm). (1 mm berdasarkan permintaan). Pengurangan panjang profil yang dilas sebesar 3 mm untuk setiap sisi profil. Kontrol suhu pelat fusi secara otomatis. Kontrol otomatis waktu fusi. Kontrol otomatis waktu pengelasan. Penyesuaian tekanan fusi. Perlindungan penuh area kerja, pelat fusi, dan silinder pengunci. Siklus kerja dan fungsi-fungsi lain dikendalikan oleh kartu elektronik (DCS). Penopang profil untuk pergantian cepat bentuk kontra. Klodpfxsxytpcj Aa Nol Perangkat pergantian cepat pisau posisi profil. Siklus kerja dengan pengatur waktu. Siklus kerja dengan kemungkinan penguncian profil diulang jika salah posisi. Lengan penopang profil.

Tahun pembuatan: 2002, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Ein-Kopf-PVC-Fensterschweißmaschine. Hervorragender Zustand, einfach zu bedienen und sofort einsatzbereit. Stromversorgung 230 V. Der Schweißwinkel des Produkts ist von 30° bis 180° einstellbar. Kodpfx Aasrkm Sgo Nsll

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, KSF-2E adalah mesin frais CNC spesialis terkemuka di dunia untuk produksi otomatis sepenuhnya dan pemrosesan lengkap sambungan silang dan kisi berkualitas tinggi dalam produksi seri grid jendela dan pintu. Berkat agregatnya, mesin ini menghasilkan sambungan silang dari kayu, aluminium, MDF, atau PVC dengan kualitas luar biasa dan memproses semua elemen kisi grid dengan sempurna. OPERASI • Sambungan silang dalam berbagai desain dan ukuran • Pemrosesan ujung grid • Pemotongan profil bingkai sesuai ukuran Ksdsxl Dnajpfx Aa Nsll Mesin juga dilengkapi dengan konveyor lintas / penyimpanan elemen tambahan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 39.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, A used and fully functional profile extrusion line, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hrs Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, infinitely variable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Barrel heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control system: conventional control with digital temperature controllers Degassing: rotary vane vacuum pump Busch (1.5 kW) Maximum output rate: 120-150 kg/h for rigid PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: melt temperature sensor and melt pressure sensor Adapter between extruder connection and extrusion tool Used tooling kit for a window profile (re-extension), consisting of: - Extrusion die "re-extension", incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 inserts for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 units, Speck vacuum pumps (each 4.3 kW) Water circulation pumps: 2 units, Calpeda (each 1.1 kW) Belt haul-off, incl. integrated saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Belt width: 250 mm Max. pulling force: approx. 25,000 N Speed range: up to approx. 10 m/min Profile saw: TCT circular saw blade: Ø 450 mm Max. profile cross-section: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Kjdpfx Aexu U Trsa Noll Note: The entire line was overhauled in 2020 and has only been in operation for 325 hours since then.

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), Trimmer 2A is a CNC corner cleaning machine for PVC frame corners, equipped with 2 interpolated axes and an automatic cycle. Properly configured, it can verify the dimensions of the workpiece. It features a 275 mm diameter blade that, with different machining programs, enables the cleaning of external corners for various profiles. Trimmer 2A is also equipped with upper and lower units with knives for cleaning the bead and with upper and lower units with knives for cleaning internal corners. The processing of both internal and external corners can be completed using the upper and lower drilling/milling units for cleaning the corners or gasket seats. All working units can be programmed independently via a CNC PC, which manages profile programming as well as machine operation, either in manual or automatic mode. Ksdsw Hk T Uepfx Aa Nell

Tahun pembuatan: 2009, Kondisi: sangat baik (bekas), IPM-TP 40 - 400 PIPE SAW for PVC PIPE Application: Cutting and chamfering of PVC, PE, PP PIPES With chip extraction fan Min. diameter: 40 mm Ksdpsvbvznefx Aa Nell Max. diameter: 400 mm Year of manufacture: 2009 Accessories: Various clamping jaws Machine location: Sachal Extrusion Machines D-26345 Bockhorn-Grabstede Bahnhofstraße 6 The machine is my property.

Tahun pembuatan: 1983, jam operasional: 100 h, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 010383, Mixer untuk PVC, 3 unit - Kjdjxl E Rvopfx Aa Nsll

Kondisi: bekas, Tahun pembuatan: 2006, CONTAINER TYPE: 20-foot refrigerated container, Carrier unit, freshly painted in RAL9003, equipped with LED lighting, flat floor, small fixed PVC section in front of the deep-freeze door, partition wall with deep-freeze door – featuring insulation wall and door instead of standard container doors. Practical size for your goods storage, ideal for limited installation spaces. Suitable for both indoor and outdoor use. We can manufacture any desired size on request. Please do not hesitate to inquire! Original photos: RFBU 372782-3 Klodpfxew Agn Ts Aa Nol RENTAL also available TECHNICAL SPECIFICATIONS: Power supply: 380/440 V, 32A, 50Hz / 60Hz with 5-pin CEE plug for site operation Interior: stainless steel/aluminum, suitable for food storage Average power consumption: 3-8 kWh Adjustable temperature range: -25 ... +25 °C (ideal for heating and cooling) Refrigerants: R134A / R449A DIMENSIONS: External dimensions (mm): 6,058 x 2,438 x 2,591 (L x W x H) Internal dimensions (mm): 5,456 x 2,294 x 2,260 (L x W x H) TRANSPORT SOLUTION: Do you need a transport solution? No problem! We deliver your container using standard trucks or crane trucks and set it up directly at your site. Contact us for a quote! All refrigeration units are serviced and offer outstanding quality and performance. We look forward to your inquiry! BIMICON Container Service – Your specialist from Hamburg BIMICON refrigerated and sea containers since 1996 in Germany and worldwide.

Tahun pembuatan: 2023, Kondisi: baru, Josan PVC mill 500 We also offer leasing and financing options. Feel free to ask us! ‼️Only €18,999 net‼️ With our complete system as shown in the picture, you can finely mill your plastics and feed them directly back into the recycling process. Of course, we also offer pre-shredders, crushers, and all other types of plastic recycling machinery. Whether you are a large enterprise, medium-sized business, or small company, our expertise allows us to meet your individual recycling needs with our machines! We have demonstration units in stock at our site in Heilbronn. From copper granulation systems, shredders, and electrostatic separators (allowing you, for example, to separate sand from plastic, copper from plastic, different types of plastics, etc., so that you can reuse the clean material directly), we offer a wide range of solutions. Just ask us. We manufacture systems tailored to your requirements. Please note: our English isn’t perfect. Feel free to speak to us in Swabian, too! Josan PVC Mill 500: Klodpfoqvmn Njx Aa Nel ▶️ Throughput approx. 200 kg/h ▶️ Power 37 kW ▶️ 24 rotating and 13 stationary blades made from the hardest special steel alloy ▶️ All-inclusive as shown in the picture ▶️ Weight approx. 1,200 kg Net price: €18,999.00 +19% VAT: €3,609.81 Gross price: €22,608.81 Subject to errors. Pictures/descriptions may differ.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G90230201, diameter mata gergaji: 350 mm, panjang total: 1.500 mm, lebar total: 970 mm, tinggi total: 1.400 mm, ketinggian potong (maks.): 100 mm, berat keseluruhan: 350 kg, kecepatan mata gergaji: 3.000 rpm, tegangan masuk: 400 V, Автоматична ЦПУ управлявана циркулярна отрезна машина за рязане и пробиване / нарязване на резба на алуминий. Tronzadoras MG - GAA-350-90+CNC+TR12 • Автоматичен цикъл. • Манипулатор с винтова двойка с дължина 700 мм. • OMRON контролер. • 10 програми с по 30 реда. • Памет за 20 детайла. • Аварийно спиране. Kodpfsvl Eahox Aa Nsll • Регулируема скорост на подаване и рязане. • Автоматично регулирана дължина на рязане с многократни подавания. • Рязане под 90º. • Автоматична въздушно-маслена система за охлаждане. • Полуавтоматичен или напълно автоматичен режим на работа. Машината е инспектирана, обслужена и готова за работа.

Tahun pembuatan: 1993, Kondisi: sangat baik (bekas), Extraction system for chips from aluminium, steel and PVC Kledpfx Aasd Rx H Ee Nel Dimensions: 800x1000x2370

Tahun pembuatan: 1980, jam operasional: 36.000 h, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11360, 1 Klodpfjvuquvex Aa Njl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11218-20, The press is fully operational, fully functional, and currently in continuous use. Klodpfswh R D Asx Aa Njl

Kondisi: bekas, nomor mesin/kendaraan: 271, berat kosong: 6.850 kg, berat muatan maksimum: 27.150 kg, berat keseluruhan: 34.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 05/1991, volume ruang muat: 59 m³, suspensi: udara, ukuran ban: 385/65 r22,5, warna: merah,

Tahun pembuatan: 2011, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1006882, Coextruder PVC Lunak Klodpfx Aaexgh Its Nol

Tahun pembuatan: 2011, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10061195, Coextruder PVC Lunak Klsdpexgh Imefx Aa Nsl

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 019, IDE extruder PVC sekrup tunggal Kjdpoxgh H Ajfx Aa Noll