Beli Tubuh bekas (60)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Completely in standard configuration with: - Stable, torsion-resistant steel frame, welded and bolted construction - Side-mounted pressing beam with continuous pressure surface, equipped with a 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, floor) are continuous support plates, 25 mm thick and coated Gjdpfswx Nfgsx Adtsil - Electromechanical adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance nuts with grease reservoir - Pressing operation is electromechanically actuated via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely adjustable via potentiometer and controlled by a frequency inverter, providing entirely wear-free press force regulation - Press force for the vertical pressing beam: min. 300 daN (kg) up to steplessly adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm/second - User-friendly operation via 2 separate push-buttons, two movement modes (open/close) selectable via control unit - Freely adjustable pressing time preselection with automatic opening 0–30 min. (switchable to seconds or hours) - Working height/loading height: 200 mm - Working dimensions: Length min.: 150 mm, max.: 1300 mm Height min.: 150 mm, max.: 1700 mm Depth: 700 mm Electrical connection: 400V, 3Ph, 50Hz (1.6 kVA, 16 A)

Kondisi: hampir baru (bekas), daya: 102,97 kW (140,00 hp), pendaftaran pertama: 10/2026, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, warna: putih, kelas emisi: Euro 6, Perlengkapan: ABS, kantung udara, komputer bawaan, kunci sentral, pendingin udara,

Kondisi: baru, Tahun pembuatan: 2026, Surface - Case Clamp GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-free steel frame, constructed with a combination of welded and bolted joints - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surface (side pressure wall, base) consists of 25 mm thick, coated, continuous support plates - Electromechanical adjustment of the press beam via precision trapezoidal-thread spindles (with enhanced pitch and concentricity accuracy) and heavy-duty running nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically via potentiometer and controlled by frequency inverter, which ensures completely wear-free press force regulation Gisdpfxew Sgnke Adtol - Pressing force for vertical press beam min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-step switch 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawer assembly - Simplified operation via 2 separate pushbuttons; 2 movement cycles (open/close) can be selected via control system - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz 16 A Availability: short notice

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.700 mm, panjang total: 3.900 mm, lebar total: 900 mm, Kami menjual mesin karena pembelian baru. Peninjauan dapat dilakukan dengan janji temu sebelumnya. Godpfx Ajxqqpbsdteil

Kondisi: bekas, Tahun pembuatan: 1992, Dimensi: 5700 x 1300 x 2400 mm Lokasi penyimpanan: Nattheim Gedpfx Aovvkl Dedtsil

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LGMATECH KORPUSSPRESSE, Press kerangka dalam kondisi siap pakai langsung. Press dapat dilihat setiap saat dengan janji temu. Gijdpfsxf Dvwox Adtel

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), Unit pembentukan tubuh Pollogen Maximus RF tahun 2011 dalam kondisi kerja yang baik. Silakan lihat juga daftar kami yang lain. Giodpfx Adjxac Unstsl

Tahun pembuatan: 2025, Kondisi: baru, new machine year of manufacture: 2025 features and technical specifications: complete in standard version with: Gisdjw Nafkepfx Adtsl - sturdy, torsion-resistant frame made of steel, welded and bolted construction - upper slat press beam with 6 elements, lateral slat press beam with 5 elements - slat press beams with field-proven tolerance compensation (Ganner system) for tightly compressed carcass joints - counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick coated bearing plates - continuous pressing surface with a height of 95 mm at the lower vertical press beam - electric motor adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance carriage nuts with grease reservoir - pressing is performed electromechanically via 2 separate worm gear motors (2 x 0.75 kW) - the pressing force of the press beams is infinitely electronically adjustable by 2 potentiometers and controlled via frequency inverters, making the pressing force control completely wear-free - pressing force for horizontal press beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) - pressing force for vertical press beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - pressing and adjustment speed of the press beams with fine positioning, via 3-step selector switch 5 / 10 / 25 mm/sec - inching operation for precise positioning of both press beams, e.g. for low pressing forces, drawers, and carcasses at 45° - very simple operation via 6 separate pushbuttons, 8 movement sequences selectable via control system - freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - post-press function to increase or reduce the pressing force during the pressing process - working height/feeding height: 300 mm - working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm including extra charge for rapid traverse speed for quick positioning of the press beams, controlled by automatic workpiece detection with sensors in the press beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special parts including set of machine feet for 500 mm working height location: flörsheim availability: short notice

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Laminated Case Clamp GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcase joints. - Counterpressure surfaces (side pressure wall, base) consist of 40 mm thick, coated, continuous support plates - Electromechanical adjustment of both pressing beams via precision trapezoidal threaded spindle (with increased pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromechanical, via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of 2000 daN (kg) per pressing beam. - The pressing force of the pressing beam is electronically controlled and set via frequency inverter, therefore a completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - User-friendly operation via 6 separate push buttons, 6 motion sequences selectable via controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 minutes (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm Height min: 150 mm, max: 1400 mm Godpfsw Tdymox Adtoil Depth: 700 mm - 1 rotary switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) - Machine no. 380.324 - 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine condition: Used Year of construction: 2013, completely overhauled by Ganner, parts warranty 6 months Special price: ex stock 54634 Bitburg - Immediately available -

Kondisi: bekas, Length: 2,300 mm Width: 800 mm Giedpfxot H Tuxo Adtjl Height: 2,700 mm Workpiece size: max. 130 x 70 x 145 cm Pneumatic case clamp or gluing press for pressing furniture carcasses or similar items.

Kondisi: sangat baik (bekas), A) Case clamp with CNC (electronic) type MDE 110/28/08 Giedpfxolkbn Ij Adtsl Motorized transport and assembly conveyor Feed speed: 12–40 m/min CNC Control: Power Control PC C 22 T Total power: 14 kW Total machine length: 6220 mm Processable workpiece dimensions: Length min./max.: 250 / 2800 mm Depth min./max.: 120 / 800 mm Height min./max.: 280 / 1320 mm B) Motorized conveyor belt model MTB 200/20/08 (length: 2000 mm) C) Motorized conveyor belt model MTB 200/20/08 (length: 2000 mm)

Kondisi: bekas,

Tahun pembuatan: 2008, Kondisi: bekas,

Kondisi: bekas, Tahun pembuatan: 2024, New demonstration machine! List price: €32,665,- complete in standard configuration including: Sturdy, torsion-resistant steel frame, welded and bolted construction – Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements – Lamella pressure beams with proven gap compensation (Ganner system) for tightly compressed carcass joints – Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick, coated support plates – Continuous pressure surface with 95 mm height on the lower vertical pressure beam – Electromotoric adjustment of both pressure beams via precision trapezoidal lead screws (with increased lead and run-out accuracy) and high-performance travelling nuts with grease reservoirs – Pressing action performed electromotorically via 2 separate worm gear motors (2 x 0.75 kW) – Pressing force for the pressure beams is infinitely variable electronically via 2 potentiometers and regulated by a frequency inverter, making the pressing force control entirely wear-free – Horizontal pressure beam pressing force min. 500 daN (kg), steplessly up to max. 2200 daN (kg) – Vertical pressure beam pressing force min. 300 daN (kg), steplessly up to max. 2200 daN (kg) – Press and adjustment speed of the pressure beams with fine positioning selectable by three-stage switch: 5 / 10 / 25 mm/second – Extremely simple operation via 6 separate push buttons, 8 motion sequences selectable via controller – Freely adjustable pressing time preselection with automatic opening, 0-30 min (switchable to seconds or hours) – Working height/loading height: 300 mm – Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm; Weight: approx. 1800 kg net; Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m – Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: Rapid-traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid-traverse speed 50 mm/sec. Sensors can be disabled for special components. 1 set of machine feet (working height 500 mm) Location: Giodeuf Hx Hjpfx Adtel

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2016, LAMELLA BODY PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration including: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly clamped carcass joints - Counter-pressure surfaces (side pressure wall, base) are continuous, coated support plates with a thickness of 38 mm - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Giodpfjxvitiox Adtjl - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance travel nuts with grease reservoir - Pressing is performed electromotively by 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously electronically adjustable via 2 potentiometers and controlled by frequency converters, making the pressing force regulation completely wear-free - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second - Extremely simple operation - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Completely overhauled by Ganner, 6 months spare parts warranty Location: ex stock 54634 Bitburg - immediately available -

Kondisi: bekas, Tahun pembuatan: 2005, panjang kontainer: 24 kaki, berat keseluruhan: 16.000 kg, berat kosong: 3.250 kg, lebar ruang muat: 2.480 mm, panjang ruang muatan: 7.300 mm, tinggi ruang muatan: 2.720 mm, nomor mesin/kendaraan: 610272 8,

Kondisi: baru, Tahun pembuatan: 2025, Pelat pembatas lumpur saluran    • Panjang 4000 mm Gjdpfxjx E U Sxe Adtjil    • Lengkap dengan silinder Kondisi: Baru Tahun pembuatan: 2025

Kondisi: baru, Tahun pembuatan: 2026, Concept Eco dan Concept Primus adalah alat bantu perakitan yang ideal untuk sambungan dowel pada proses pengepresan kabinet serta pada pembuatan laci. Deskripsi singkat: • Dengan kompensasi toleransi yang telah terbukti di lapangan (sistem GANNOMAT) • 2 potensiometer untuk pengaturan gaya tekan yang dapat diatur secara kontinu • Gaya tekan minimum 300/500 daN (kg) pada Concept Eco Gaya tekan minimum 600/800 daN (kg) pada Concept Primus • Gaya tekan maksimum 2200 daN (kg) pada Concept Eco Gaya tekan maksimum 3500 daN (kg) pada Concept Primus • 3 kecepatan penekanan dan penyesuaian Giodpfx Adodx R Dmotjl 5 /10 / 25 mm/dtk (dengan posisi halus / mode lambat) • Pengaturan waktu pengepresan yang dapat dipilih secara bebas dengan fungsi buka otomatis • Pengoperasian sangat mudah melalui 6 tombol tekan terpisah untuk 8 urutan gerakan

Kondisi: bekas, nomor mesin/kendaraan: 008256, de_001 Godpfx Aox A Hfvsdteil

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, LAMELLA FRAME PRESS GANNOMAT «CONCEPT 70 ECO» Complete in standard configuration with: - Sturdy, distortion-free frame made of steel, welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams equipped with the proven Ganner tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Motorized adjustment of both press beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance sliding nuts with grease reservoir - Pressing is performed electrically by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and controlled by a frequency inverter, resulting in an absolutely wear-free press force control - Pressing force for horizontal press beam minimum 500 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) Pressing force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec - Extremely simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height 500 mm Operating manual in German Fully overhauled by Ganner, spare parts warranty: 6 months Location: ex stock 54634 Bitburg Gsdpfxsw Td A Ie Adtsil - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Concept Eco dan Concept Primus adalah alat bantu perakitan yang ideal untuk sambungan dowel pada proses pengepresan kabinet serta pada pembuatan laci. Deskripsi singkat: • Dengan kompensasi toleransi yang telah terbukti di lapangan (sistem GANNOMAT) • 2 potensiometer untuk pengaturan gaya tekan yang dapat diatur secara kontinu Gijdpfx Adodx R Dtjtel • Gaya tekan minimum 300/500 daN (kg) pada Concept Eco Gaya tekan minimum 600/800 daN (kg) pada Concept Primus • Gaya tekan maksimum 2200 daN (kg) pada Concept Eco Gaya tekan maksimum 3500 daN (kg) pada Concept Primus • 3 kecepatan penekanan dan penyesuaian 5 /10 / 25 mm/dtk (dengan posisi halus / mode lambat) • Pengaturan waktu pengepresan yang dapat dipilih secara bebas dengan fungsi buka otomatis • Pengoperasian sangat mudah melalui 6 tombol tekan terpisah untuk 8 urutan gerakan

Kondisi: bekas, nomor mesin/kendaraan: 008254, de-1 Giodpfox A Hfpsx Adtol

Kondisi: sangat baik (bekas), hess-korpuspresse-export Giedsxgvwpspfx Adtsl

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en-1 Gisdpfjb Eln Dex Adtsl

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Gsdpfsiidm Nox Adteil Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -