Beli Randek bekas (11)

Kondisi: bekas, Tahun pembuatan: 2015, Lini produksi dinding, diproduksi untuk memproduksi dinding pada manufaktur modular. Digunakan oleh produsen Swedia antara tahun 2015 dan 2021. Njdpfx Asxv Arxjivolg CATATAN: Dijual dalam kondisi apa adanya. Panjang stasiun: 7000 mm Lebar stasiun: 2700 mm Stasiun no.1: Stasiun pembingkaian CAD/CAM (termasuk dua alat paku) Stasiun no.2: Meja kerja Stasiun no.3: Jembatan pemaku semi otomatis (termasuk dua alat paku) Stasiun no.4: Meja kerja – Meja pengangkat Stasiun no.5: Portal multifungsi CAD/CAM (termasuk empat alat sekrup dan unit milling) Stasiun no.6: Stasiun kerja – Meja penerima – Bisa digeser samping Stasiun no.7: Stasiun kerja – Transmisi sudut Stasiun no.8: Stasiun kerja – Meja pengangkat Stasiun no.9: Stasiun kerja – Transmisi sudut Stasiun no.10: Stasiun kerja – Meja pengangkat

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Lini produksi / meja untuk panel / elemen dinding dan atap. Sedikit digunakan sejak baru; kondisi dan fungsi masih seperti baru. Terdiri dari 1 unit Randek BS10u dengan kemiringan 80 derajat dan 2 meja BS05. Dilengkapi penjepit pneumatik dan roller bertenaga udara yang memudahkan pergerakan elemen dinding. Panjang: 9m masing-masing. Ukuran dinding: dari 225x900cm hingga 365x900cm. Harga beli tahun 2022: 850.000 SEK ≈ 80.000 EUR. Njdpfxoxq Rrcs Aivolg Harga belum termasuk PPN.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, RANDEK FORGÓ KERESZTVÁGÓ FŰRÉSZ Nsdpfx Aisvryhgovjlg

Kondisi: bekas, Tahun pembuatan: 2010, Die Lösung wurde für die Herstellung von vorgefertigten Außenwandpaneelen für Hausbaufirmen entwickelt. Nsdpfx Aeykqxdoivslg Das System besteht aus drei Hauptkomponenten: einer schienengeführten Nagelbrücke und zwei Arbeitstischen. Nagelbrücke: Die Nagelbrücke ist für das automatisierte Nageln der Paneele mit vier Nagelpistolen konzipiert, die jeweils mit der entsprechenden Gegenseite verbunden sind. Das System umfasst vier Nagelvorrichtungen, die das Nageln an den entsprechenden Arbeitstischen gemäß vordefinierter Nagelmuster automatisch ausführen. Das Nagelportal ist auf einem am Betonboden verschraubten Bodenschienensystem montiert, wodurch das brückenartige Nagelsystem je nach Bedarf zwischen den beiden Arbeitstischen verfahren werden kann. Das System ist mit Lichtschranken zur Positionierung und Sicherheitsüberwachung ausgestattet. Funktionsweise • Der schienengeführte Rahmen befindet sich in einer neutralen Ladeposition zwischen den beiden Arbeitstischen. • Der Nagelvorgang wird von einem der beiden Arbeitstische aus gestartet. • Das ausgewählte Nagelmuster wird automatisch ausgeführt. • Das Nagelportal wird aktiviert, um den Nagelvorgang gemäß dem gewählten Muster vorzunehmen. Arbeitstische: Die Arbeitstische sind mit Auflage-Nuten zur Positionierung der Holzständer versehen. Diese Nuten sind über einen Schiebemechanismus verstellbar, sodass sie an verschiedene Paneeltypen und -konfigurationen angepasst werden können. Funktionsweise • Die Außenkanten des Tisches werden manuell in Richtung des Paneels verstellt. • Die ausgewählten Latten werden manuell angelegt, um eine präzise Paneelpositionierung zu ermöglichen. • Der Bediener positioniert die zu montierenden Komponenten in die entsprechenden Nuten und gegen die Latten. • Das brückenmontierte Nagelsystem wird aktiviert, um das Nageln gemäß dem gewählten Muster durchzuführen.

Kondisi: baik (bekas), Tahun pembuatan: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of Manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and precise. It has long been established on the market and is continuously improved in close collaboration with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you require. The large saw blade diameter (700 mm) also allows you to cut multiple sections of stacked timber simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cycle - PLC-programmable saw - Wood fixation close to the cutting area for precise results Nledpfxoh Ayyqs Aivog Roller conveyor system with 5 adjustable pneumatic stops. Length 6.25 m Discharge roller conveyor 4.10 m Complete line: 11.5 m Technical information subject to change.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Randek Truss System NT memproduksi rangka atap menggunakan kepala press tipe C, alat jepit magnetik yang dapat dipindahkan di lantai baja, dan salah satu sistem crane kami. Sistem crane: Crane dinding Crane kolom Crane overhead bermotor Crane counter balanced Kepala press: 23T, 27T, 35T, 50T Sistem laser sebagai opsi. Nlsdpfx Aijxwkuqjveg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Arbeitstisch mit Verpresseinrichtung und Aufrichtvorrichtung Nljdpfx Aisx Tdtnjvjg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The Randek Cut-Out Saw JS400C is designed for making notches at the ends of timber elements, for example, to allow the insertion of a tie beam into upright studs. The machine pneumatically secures the timber and performs two cuts using its two 400 mm diameter saw blades. The maximum notch length is 380 mm, and the cutting depth can be set up to a maximum of 115 mm. The saw is quick and easy to operate via foot pedal control. Function Description The timber to be notched, such as a stud, is pushed into the covered cutting slot up to the pre-set stop. The protruding end is supported on a roller stand (not included in the delivery). The timber is pneumatically clamped using the foot pedal, which also initiates the cutting cycle. Technical Specification • Notching depth: 30 - 115 mm • Notching length: 10 - 380 mm • Timber thickness: 30 - 70 mm Njdpfod Arwhsx Aivjlg • Electrical connection: 3 x 400 V, 50 Hz, 25 A • Compressed air: 0.5 - 0.8 MPa (5 - 8 bar) • Saw blades: HM 400/30-3.5/2.5/40 Safety The saw is effectively shielded by a cover plate to prevent access to moving parts. When the cover is opened, the power supply is automatically interrupted, significantly reducing the risk of injury. Advantages • Enables effective and precise notching/cutting • Flexible and easy to set up • Simple operation • Adjustable working height and foot-pedal operation ensure ergonomically correct working conditions for the operator

Kondisi: baru, Tahun pembuatan: 2027, ZEROLABOR ROBOT SYSTEM for Timber Frame Construction The Randek ZEROLABOR robot system is a production cell where various work processes are carried out fully automatically by robots. The system is flexible and can be configured to customer specifications. The robot cell can be integrated into existing production lines or operate as a standalone unit. The system enables nearly fully automated production of walls, floors, and roofs using timber frame construction. Automated Processes: Nljdpfx Aoduub Usivjg - Panel handling. Panels are retrieved from various stacks using a vacuum suction system and laid onto the timber frame structure according to CAD data. The system is flexible and is capable of handling different panel sizes. - Fastening of panels by screwing, stapling, and/or nailing. - Creation of cut-outs for electrical installations, windows, etc. - The system can process 1, 2, or 3 types of panels. - Component marking via inkjet printing. - Gluing - Waste handling: plasterboard and OSB waste, for example, is deposited in defined locations or directly into designated waste containers as required. - Effective dust extraction. - Alignment of the component with the work table. - Alignment of studs before nailing, ensuring precise positioning of nails/staples into the studs.

Kondisi: baru, Randek Crosscut Saw SPL728 Computer-controlled, turret-type, with LAN (Ethernet) connection for downloading or storing cutting jobs (text file in ASCII format). The number of programs that can be stored is limited only by the size of the hard drive. The graphical touchscreen (HMI) enables the operator to view all details directly on the screen or to input cutting jobs directly. This minimizes disruptions to the production process. Saw blade: Carbide-tipped, low-noise 700 mm diameter / 116 teeth 360° horizontally rotatable, Tiltable from 90° to 28°, 250 mm plunge depth Motor power: 7.5 kW Nedpsfg Tatofx Aivjlg Automatic closing, interlocked safety guard made of plastic. Infeed table, available in 4.0 / 5.8 / 8.2 / 10.6 m lengths Driven infeed roller, IRO4-120. Transport rollers: 76 mm diameter, roller length 400 mm, roller pitch C/C 500 mm. Rear stop 120 mm. Pneumatic hold-down devices, 2 units Conveying direction selectable left or right. Outfeed table, available in 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m lengths Computer-controlled roller conveyor type LX. Guide roller for outfeed, rollers 76 mm diameter, length 400 mm. Rear stop 120 mm. 2 computer-controlled longitudinal stops, driven by toothed belt. Stop 1 – designed for cut lengths down to 50 mm. Stop 2 – travels the full length of the outfeed table. The positioning of the longitudinal stops and the setting of the cutting angles are computer-controlled independently. Maximum travel speed of the longitudinal stops: 1 m/s. Wood feeding: 1 unit Retracting devices: 2 units Conveying direction: selectable left or right.

Kondisi: baru, Tahun pembuatan: 2026, Wendetable Combination for Timber Frame Construction – BS20 The Randek Wendetable Combination is an efficient tool for producing prefabricated walls, roofs, floors, and gable constructions with timber or metal frames. The tables can be operated as standalone units or integrated into production lines. Perfectly rectangular components of high quality are achieved through the clamping function. The raising and turning of building elements is carried out via a controlled, manually operated process. The Wendetable Combination has been developed for manufacturing prefabricated houses, ensuring high productivity. The adjustable range for component height is 2.25 m to 3.10 m. The following table lengths are available: 6.0 m / 7.5 m / 9.0 m / 12.0 m. Wall thickness can vary between 80 and 250 mm. Functions: The Wendetable Combination was designed for efficient execution of the following operations: manufacture of framework, insertion of insulation, stapling of plastic or paper membranes, and application and nailing of wall claddings. • Manufacture of rectangular components: The pneumatic clamping mechanism on the long side of the master table presses the frame construction into a right-angled, high-precision component • Automatic turning of the component, manually controlled • Automatic raising of the component Technical Description: • Length options: 6.0 m / 7.5 m / 9.0 m / 12.0 m • Width adjustment between 2250 – 3100 mm; width can be easily set manually • The master table can be hydraulically tilted up to 92°, the take-off table up to 86° • Pneumatically operated pressing function on the long side of the master table • Stops 160 mm high • Both tables are equipped, as far as technically possible, with plywood cladding. The plywood surface enables direct placement of sub-components and beams on the table • Table surfaces are supported by a solid steel frame • Optimal working height of 620 mm • Longitudinal C-sections for positioning stops for studs • The tables are supplied fully pre-assembled. The assembly process is straightforward Safety: • Emergency stop switch at the control panel • CE conformity Advantages: • Right-angled components thanks to the pressing function • Controlled automatic raising and turning of components • Ideal working height • Flexible width adjustment Nsdpfx As Nn Hyoivolg