Beli Sikat Deburring Mesin bekas (77.789)

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 18 mm Angle range 15° - 50° Machine weight approx. 110 kg Beveling System UZ18 HARDWORKER Maximum bevel width: 18 mm with automatic feed The UZ18 Hardworker is one of the most powerful automatic feed beveling machines available on the market. It is suitable not only for workshops, but also for on-site assembly. The machine features a stepless adjustable working angle system. Thanks to the special design of its drive system, the UZ18 Hardworker is also suitable for processing harder materials. The machine comes equipped with an automatic feed. Working with the UZ18 Hardworker is therefore highly convenient. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 70 x 150 x 6 mm * Operating range for sheet thickness: 6 – 40 mm * The bevel angle can be easily adjusted steplessly from 15° to 50° without the need for part replacement * Double-sided bevel (X, K) without material handling * Simple connection to a 3D manipulator for easier operation and handling * Quiet operation Guedpfjk Egrtsx Aazof * Equipped with automatic feed * Suitable for stationary or mobile use * The machine can process large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces can be inserted directly into the machine - Max. bevel width (hypotenuse): 18 mm - Steplessly adjustable angle: 15° - 50° - Operating range for sheet thickness: 6 – 40 mm - Motor: 750 W - Feed speed: 1.9 m/min - Weight: 110 kg - Dimensions: 438 x 719 x 644 mm We also offer an optional (mobile) 3D manipulator for this unit.

Kondisi: baru, Diameter -- mm Workpiece width -- mm Workpiece length -- mm Chamfering System UZ30 EXPRESS Maximum chamfer width 30 mm with automatic feed Stationary UZ30 EXPRESS is one of the best solutions for chamfering both large and small batches, as well as smaller workpieces or long, narrow flat bars. The UZ30 EXPRESS can be used not only for chamfering but also for deburring. Thanks to the unique geometry of the milling cutter, the feed rate can be set up to 3.5 m/min. For longer workpieces, the machine can be equipped with an additional infeed and outfeed table, expanding the working surface to an impressive 2,824 mm. - The machine is designed for chamfering steel, aluminium, copper, and other materials such as flat bars, pipes, and welding bevels - High-quality milling ensures mirror-finish surfaces - Feed control via rotary knob - Cutter speed is regulated by frequency inverter - Additional optional accessories available for pipe chamfering - Option to extend the worktable to a total of 2,824 mm - Fast and precise machine adjustment via gauge Technical data: Approximate maximum chamfer widths: at 30° - 30 mm / at 45° - 20 mm / at 60° - 17 mm Adjustable bevel angle: 30° - 60° (stepless) Sheet thickness range: 3 - 100 mm Pipe chamfering: OD 102 mm - OD 156 mm Milling motor power: 4,000 W Gusdpfxor I E Exs Aazsf Milling head speed: Adjustable by frequency inverter Feed rate: 0.6 – 3.5 m/min Weight: 400 kg Dimensions: 825 x 1,200 x 1,615 mm Number of indexable inserts: 5 pieces

Kondisi: baru, en-GB Godjk Uqhajpfx Aazouf

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 3 mm Spindle speeds 3600 rpm Angle range 30 - 60° (continuously adjustable) Machine weight approx. 31 kg Space requirement approx. 530 x 420 x 410 mm Maximum chamfer width of 3 mm – Mechanically adjustable chamfer angle Guedpfsppgcrox Aazef Designed for deburring and chamfering steel parts and workpieces. Suitable for processing various materials. Robust and stable machine construction. * Scale for setting machining depth * Safety cover * Adjustable processing angle * Suitable for steel, stainless steel, aluminum, and other materials * Precise, heavy-duty, extra-long mechanical guide - Number of indexable inserts: 5 pcs. (four cutting edges) - Feed: manual

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 12 mm Angle range 30/45/22.5/37.5/50° Machine weight approx. 30 kg Beveling System UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic feed beveling machines on the market. Thanks to its compact size and low weight, it is suitable not only for workshops but also for on-site assembly. The machine is equipped with automatic feed, making operation of the UZ12 ULTRALIGHT very convenient. * Suitable for conventional steels (up to a tensile strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 65 x 60 x 3 mm * Sheet thickness working range: 3 – 35 mm * Beveling of pipes from an internal diameter of 95 mm * Variable adjustment of the required bevel angle using interchangeable holder kits for each specific angle * Double-sided bevel (X, K) without handling the material * Quiet operation * Equipped with automatic feed * For stationary or mobile use * The machine can process large workpieces without additional support at a speed of 1.8 m/min * Smaller workpieces can be inserted directly into the machine * Lightweight and compact design, manageable by a single operator * Thermal motor protection Godpfx Aaeppgcyozouf - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (interchangeable kits) - Sheet thickness range: 3 – 35 mm - Motor: 400 W - Feed speed: 1.8 m/min - Dimensions: 470 x 294 x 523 mm We are pleased to optionally offer you a mobile 3D manipulator for this unit.

Kondisi: baru, Model designation B3 deburring/chamfering machine Guodpfx Aajk Au Drozjf

Kondisi: baru, Model designation Gujdpfx Aaek D Nyijzof Chamfering system UZ12 ULTRALIGHT

Kondisi: baru, Model designation Gusdpfjk Au Dvex Aazof Chamfering system B22 ZERO

Kondisi: baik (bekas), Tahun pembuatan: 2011, Edges and contours - deburring machine ROLEI type: 00645-KKE2, year 2011. Guedpfxewnpfls Aazef

Kondisi: baru, Diameter 150 mm Workpiece length 1300 mm Workpiece width 800 mm Max. grinding wheel diameter 150 mm Speed range 0 – 2830 rpm Working height 945 mm Head swivels +/- 180° Motor power 1.5 kW Machine weight approx. 230 kg Space requirement approx. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to conventional grinding and deburring machines. Its head, consisting of a grinding wheel and a flap brush, can be swiveled 180°. This allows for rapid switching between the two units. The counterweighted arm enables the head to move smoothly over the workpiece, resulting in consistent edge rounding. The worktable prevents even the smallest components from slipping. Equipment: - Deburring and rounding of laser-cut or punched sheet metal parts - Grinding head consisting of a grinding wheel & flap brush - Grinding head assemblies swiveling up to 180° - Working area 800 x 1300 mm Guodexab Hpopfx Aazsf - Counterweighted arm for easy swiveling - Non-slip table surface - Ergonomic machine operation via on/off pushbuttons - Grinding head with stepless speed control via frequency inverter - Ergonomic handle for easy operation

Kondisi: baru, Brushes - Diameter Ø 250 mm Gedpoxaamnjfx Aazsuf Brush width 40.0 mm Speed range 2850 rpm Operating voltage 400 Volt Total power requirement 1.3 / 1.8 kW Machine weight approx. 36.0 kg Space requirement approx. 415 x 467 x 356 mm Equipment/features: - Deburring of single pieces and small batches - Deburring of straight round, rectangular, and square tubes + flat material - Heavy-duty, durable industrial design - With maintenance-free motor - Long service life and smooth operation due to balanced rotor - Equipped with precision ball bearings - Shelf for safety glasses - Includes 1 multipurpose wire brush, wire thickness 0.35 mm - Operating manual

Kondisi: baru, Tahun pembuatan: 2026, Side brush for the ZP7500 CORMAK sweeper is a practical additional accessory that significantly increases the efficiency of the machine. It ensures thorough sweeping in hard-to-reach areas—along walls, shelves, curbs, or in corners where the main brush cannot access. This results in cleaner surfaces after just one pass, with no need for additional cleaning. The use of a side brush also increases the sweeper’s working width, directly boosting work efficiency. In practice, this means faster cleaning of larger surfaces such as warehouses, yards, or parking lots. The robust construction and wear-resistant bristles guarantee a long service life, even under intensive use. The brush is designed for demanding environments—effectively collecting both fine dust and larger debris such as sand, leaves, or gravel. The brush's construction is adapted for industrial use—resistant to mechanical damage and intensive operation. Installation and removal are quick and intuitive, facilitating easy replacement or servicing without operational downtime. Key Benefits: Gedoyvp Ngspfx Aazsuf - Thorough cleaning along edges and in corners - Increased working width and higher efficiency - Effective pick-up of fine and larger debris - Reduced manual labor and fewer passes required - Durable, wear-resistant bristles - Quick installation and convenient operation

Kondisi: bekas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, up to polishing of metal surfaces. Gusdpom Nlm Dsfx Aazof Working height: variably adjustable from 0.5 mm to 150 mm Working width: 1150 mm Maximum part weight: 300 kg Wide belts with abrasive belt unwind: 2200 mm Standard with vacuum holding system, optional with magnetic holding system Thanks to the modular design of the machines, it is possible to offer the optimal configuration for the customer’s machining tasks. The machine frame can accommodate up to 3 internal processing units and an additional external processing unit. Please contact us for further information and images via mail(at) or

Kondisi: bekas, Tahun pembuatan: 2007, Finishing machine for single-sided or double-sided processing, used 3 FLAKKO units, each equipped with 4 disc tools: Drive power: 7.5 kW Spindle speed: 300 – 2500 rpm Feed speed: 2–20 m/min Wet processing Tool diameter: 230 mm Working width: 400 mm for single-sided processing Working width: 200 mm for double-sided processing with turning device Special magnetic plates Designed for hot processing IPC control with PLC Connection rating: 3x 400V 50Hz Connected load: approx. 52 kW All units overhauled and converted to new 4-point bearings between 2021 and 2023. Gusdpfetpb Unox Aazjf Special price: 25,000 EUR net – ex works, loaded on truck – Please contact us for further information and photos via mail(at) or

Kondisi: bekas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact processing center for deburring, deslagging, derusting, oxide layer removal, edge rounding, fine grinding up to polishing of metal surfaces. This machine is suitable for heavy-duty applications. With a fixed working height, the machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Gjdpfonah Tajx Aazsuf Wide belt with abrasive belt length: 3250 mm Standard with vacuum holding system, optionally with magnetic holding system By using abrasive belts with a length of 3250 mm, you achieve a consistently smooth surface and reduce consumable costs, as these belts offer a longer service life. The modular design of these machines allows for the optimal configuration according to the customer’s processing requirements. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, combined with advanced mechanics and electronics, make this series a universal processing center for deburring and finishing applications. Please contact us for further information and images via mail(at) or *

Kondisi: bekas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. With its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 1150–1350 mm Maximum part weight: 500 kg Wide-belt with abrasive belt length: 2620 mm Gsdpfx Aajnah Tdszeuf Standard with vacuum holding system, optionally with magnetic holding system. By using abrasive belts with a length of 2620 mm, you achieve a consistently smooth surface and reduce consumable costs, since these belts have a longer service life. Due to the modular design of these machines, it is possible to offer the optimal configuration for the customer’s specific processing requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing applications. Please contact us for further information and photos via mail(at) or

Kondisi: bekas, Deburring and Finishing Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, deslagging, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 1350 mm Maximum part weight: 400 kg Guedpfx Aajm Rpy Rjzjf Wide belts with abrasive belt length: 2620 mm Standard with vacuum holding system, optionally with magnetic holding system By using 2620-mm-long abrasive belts, you achieve a uniformly smooth surface and reduce consumable costs, as these belts have a longer service life. Due to the modular design of the machine, it is possible to offer the optimal configuration for each customer’s processing needs. The machine structure can accommodate up to 3 internal processing units and one additional external processing unit. The high rigidity of the machine frame and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing tasks. Please contact us for more information and pictures via mail(at) or

Kondisi: baik (bekas), Tahun pembuatan: 1991, Fladder SC 300 / 1000 finishing and brushing machine Year of manufacture: 1991 Manufacturer: Fladder System Denmark S/N 560 Machine height: 2210 mm Machine width incl. carousel: 4000 mm Machine length incl. carousel: 4500 mm Carousel working height: 800 mm Working width: 1200 mm Max. workpiece height: 100 mm Feed speed: 0.3 - 10.0 m/min lock-itTM spindles and length: 6 x Ø100 x 350 mm Voltage: 3 x 400/500V - 50/60Hz Max./Min. fuse: 32 A Max. power consumption: 15 kW Gusdpfx Aekwcxyoazef Extraction: 2500 m3/h Net weight: 1700 kg

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, PRAWEMA 2005 204 HS-W Gedpsvm Efaofx Aazjuf PRAWEMA 2006 SYNCHROFINE 205 HS

Kondisi: baru, Tahun pembuatan: 2026, de-hu-001 Guedsx Utt Tspfx Aazjf

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: EG000G, fitur perlengkapan tambahan: Ventilation dust system included, Cattinair machine zum Transport von hauptsächlich Holzstühlen zwischen zwei Lackierschichten, in einwandfreiem Zustand, Betrieb in den Niederlanden, importiert zum Eigengebrauch, sofort einsatzbereit. Im Preis enthalten ist eine Absaugung für das Staubsystem mit Ventilator und Motor. Schleifmittel sind nicht enthalten. Gusdpfoq T N Srox Aazof

Kondisi: baru, Working width: 600 mm Maximum workpiece height: 300 mm Feed speed: 4-12 m/min Motor power: 2x4 kW Power supply: 400 V Manual adjustment of the working unit height Independent adjustment of the first and second working unit Emergency stop switch Gusdpsgpgyqofx Aazef Includes 2 brushes

Tahun pembuatan: 2026, Kondisi: baru, The fruits are transferred from the sorting table to the washing tank and then conveyed to the washing brushes, where the first cleaning stage begins. Using the conveyor belt, the fruits are moved under a fresh-water spray to the swiveling grater mill, where the fruit or vegetables are processed to the desired consistency. Thanks to the swiveling grater mill, the system can also be used as a pure washing and conveying unit without modification. Technical Data: • Nominal capacity: 1500–2000 kg/h • Power requirement: 4 kW, 400 V, 16 A, three-phase • Material: Wnr. 1.4301, AISI 304 stainless steel • Dimensions: 950 x 3160 x 2000 mm • Discharge height: 1250 mm • Weight: 275 kg • Washing tank water capacity: 280 L/shift • Water consumption: 100–200 L/h (depending on settings) • Water connection: ¾” quick coupling • IP65 electronic control panel • Machine in compliance with EU guidelines • Minimal maintenance required • Continuously adjustable belt speed • Easy to operate • Effortless to clean • Adjustable machine feet • Swiveling grater mill • Noise emission: 60–70 dB Gedpfxjd Aqnfo Aazouf • Equipped with 4 counter-rotating brushes for intensive washing Optional: • Various sieve inserts for the grater mill • Stop&Go system for automatic control between belt press and washing/milling unit • Dosing attachment for pack presses Also available without fruit pulper!

Kondisi: hampir baru (bekas), lebar kerja 600 mm dua poros sikat dua motor masing-masing 4 kW pengaturan kecepatan maju yang halus pengaturan posisi poros atas/bawah catu daya 400V Gedpfxjytp Tfo Aazjuf 650 kg tahun 2021

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Top Finish Italmeccanica TOP FINISH 6T-2M brushing machine – brushing machine with one horizontal shaft, two edge pins, and two rotary units. Gjdpsk Iu Hvefx Aazeuf