Beli Single Stw 150 bekas (32)

Kondisi: baru, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg EQUIPMENT HIGHLIGHTS: • Smart Controller Plus 7" touch / Industry 4.0 capable Laedpfx Amjftm Hro Eoh • Flow metering with adjustable flow alarms • Return temperature display • Frequency converter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector, 20mA/TTY • Connection for external PT100 temperature sensor for tool temperature measurement and display • Continuous bypass of the heat exchanger using a 3-way valve to reduce scaling in the heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Boost pump for system filling at high temperatures • Fill mode can be switched from cooling water to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are fulfilled only if specifically stated in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Ljdpfx Aeg Ey Rfsm Eeah Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (LxWxH): 1,414 x 503 x 1,350 mm (without connections in continuous bypass) Weight: approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control and regulation unit: Smart Controller (7" touch display) - Heater control via solid state relays - Control cabinet IP54 - Cooling controlled by solenoid valve - Flow measurement by differential pressure method - Bypass between supply and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by detection of heater surface temperature and flow rate - Dirt filter in cooling water inlet and in return of circulation system - Monitoring of supply temperature by electronic safety temperature limiter - External oil filler neck - DILO-type fittings on internal piping connections (except pump connections) - At 350°C: Continuous bypass, including bellows valves - Connection for nitrogen blanket with manometer and safety valve set to 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are specified in quotations or order confirmations.

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. pump pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Process media connection: Flange DN40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control unit: Smart Controller (7" touchscreen display) - Heating control via solid-state relays - Control cabinet IP54, forced ventilation - Expansion tank, heater, and piping in stainless steel Lodpfx Amsg Ey T Ee Esah - Heating with Incolloy stainless steel tubular heaters - Strainer (circulation) - Unit ready for connection, mounted on castors (2 steerable and braked) - Cooling and filling controlled by solenoid valve - Configurable automatic filling via cold water intake or separate connection (factory-set via cooling water inlet) - Flow measurement via differential pressure principle - Level monitoring with magnetic float switch - Automatic temperature-dependent system lock (not on WP7-90) - Flow monitoring by flow detection - Bypass between supply and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return of the circulation system - Continuous bypass of the heat exchanger via 3-way motorized mixing valve (WP7-180/200) - System pressure monitoring via pressure transmitter in the expansion tank (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional otherwise) - Safety temperature limiter (STB) in heater and supply line (WP7-200) - Manometer in supply line at the rear of the unit - Circulation circuit insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with European directives. Other directives and standards are fulfilled only if specified in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements differing from the standard will be specified in quotations or order confirmations.

Kondisi: baru, *TECHNICAL SPECIFICATION: Heating capacity hot circuit: 48 kW Heating capacity cold circuit: 12 kW Cooling capacity hot circuit: 42 kW Cooling capacity cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 l at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions LxWxH: 1,395 x 753 x 1,180 mm Weight approx. 580 kg *FEATURES HIGHLIGHTS: -Control and regulation via PLC with touch screen -Heating via Incolloy stainless steel tubular heaters -Heating control via solid state relay -Control cabinet IP54 with forced ventilation -Electrical wiring on terminal blocks -Potential-free input for signal to switch between hot/cold (front door) -Potential-free contact for collective alarm on 3-pin connector (front door) -Temperature control unit with heating and cooling circuit, designed for connection to a valve station for rapid switching between hot and cold circuits -Temperature-controlled feeding of return water -Level monitoring with automatic level compensation -Dirt filter in cooling water inlet and in the return of the circulation system -Separate automatic filling with dirt trap -Flow measurement based on differential pressure in both circuits -Heating element surface monitoring via temperature sensor -System pressure regulation, required compressed air connection: 6 to 8 bar -Booster pump type DS 360 for make-up water supply -Corrosion-resistant components (stainless steel, brass) -Unit mounted on castors and ready for connection *OPTIONS: -EcoTemp system for intermittent operation -Connection for external temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. Ljdpfjg Ey Ufex Am Ejah *This unit complies with the European directives. Other regulations and standards are only fulfilled if indicated in the order confirmation. This technical specification reflects the standard equipment; customer-specific options differing from the standard will be specified in offers or order confirmations.

Kondisi: baru, *Technical Standard Specification: Device Type: 6/95 Heating Capacity: 6 kW Cooling Capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Functional Equipment: - Cooling and filling controlled by solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return flow of the circulation and cooling water inlet - Reversing unit for leak stop operation - Manual tool drainage via leak stop operation and actuation of a vent valve at the rear of the unit - Monitoring of filling time and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling spout, interface cable, mechanical flow meters *Electrical Functional Equipment: - Control and regulation unit SBCmini, with relay for collective alarm, 230V, on terminal at rear of controller - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - CEE plug 16A *General Features: - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tube heating elements made from Incolloy - Device mounted on castors, two of which are steerable and with brakes - Additional temperature safety device for secure disconnection of the heater at the heating downstream circuit breaker *Cooling: Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Threaded socket G3/8" F (Capacity specified at 80°C supply and 15°C cooling water temperature, and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Flow rate (max.): 40 l/min Delivery pressure (max.): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions / Weight / Colour: Dimensions (L/W/H): 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium: Threaded socket G1/2" Cooling water: Threaded socket G3/8" Filling (option) Laedpfx Aefnvvijm Eeh *This device conforms to European directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be listed in quotations and/or order confirmations.

Kondisi: baru, *Technical Specification: -Air-cooled, 25.5 kW rated at +10°C supply temperature at an ambient temperature of +32°C -Temperature range supply: +5°C to +30°C (Optional lower temperatures down to -5°C possible) -Air volume: 8,000 m³/h -Max. air inlet temperature: +30°C -Optional heating capacity up to 24 kW *Pumps: Lasdpjg Ewwrefx Am Esh -Delivery rate up to 150 l/min -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -Unladen weight: approx. 480 kg -Process medium connection: DN 32 internal thread *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -SBC-T control and regulation unit -Display for setpoint and actual value, alarm indicator -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve in accordance with DIN EN 378 -Power control -Frost protection monitoring -Flow monitoring -Grill cover over condenser -Oil sump heating -Drain facility -Level monitoring via float magnetic switch -Installed dirt trap in return line of process medium -Bypass valve between supply and return as pump protection, factory set -High and low pressure limiter according to DIN EN 378 -Stainless steel tank, capacity: 80 litres, open system, fully insulated -Self-supporting housing with castors, mobile -System for indoor installation -Control cabinet IP 54 Other performance classes available on request. Visit our homepage for more details. *This unit complies with European directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requirements deviating from the standard are shown in quotations or order confirmations.

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) Lodsg Ezarepfx Am Eoah - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.