Beli Sinter bekas (117)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jenis arus masuk: AC (pendingin udara), Electrically Heated Roller Sintering Furnace, Make: Riedhammer Iisdpfxjp T Th Ho Aahok Model: TR 18/4x33/10-E 90 Condition: As new Length of debinding zone: 6.12 m Length of heating/holding zone: 6.12 m Length of cooling zone: 6.12 m Total furnace length without conveyor system: approx. 18.4 m Total furnace length with inlet/outlet: 20.4 m Overall furnace width: 3.5 m Overall furnace height: approx. 2.5 m Clear furnace width: 1,540 mm Usable width: 4x 330 mm Usable height above roller top: 100 mm Roller spacing: approx. 85 mm Roller diameter: approx. 50 mm Number of controlled furnace conveyor drives: 3 units Number of control zones: 34 Connected load (oven): approx. 476 kW Maximum temperature at thermocouple: 900°C Maximum temperature: 930°C Power supply: 400/230V, 50Hz Cooling water consumption: approx. 50 m³/h

Tahun pembuatan: 2020, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Full-automatic continuous sintering furnace line Make: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned in 2021) Iiodpfoxfcdysx Aahok Programmable, equipped with online diagnostic system. Fuel: Natural gas Hydrogen + Nitrogen (N₂ + H₂) capabilities integrated The plant has seen very little operation and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas-fired, N₂/H₂ operation, LED burning zone, rapid quench cooling (Pos 2), flameless discharge section, ceramic muffle, heating: low-NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW across 8 zones, twin thermocouples, 100 mm working height. LED 3 debinding zone ("low energy dewaxing" – utilizes chemically bound energy of waxes and provides improved burnout conditions, especially for heavy PM parts (>0.9kg)); Dimensions: - Infeed table: 2 m (target/actual belt speed adjustment) - LED3 burn-out zone: 1.5 m - Sintering zone length: 7.5 m - Rapid quench cooling: 1 m - Convective cooling zone: 2 x 4 m - Flameless outfeed section with air shower: 2 m - Outfeed table: 2.7 m - Total system length: 23.7 m - Width: 2.3 m Connection values: Heating: installed capacity 320 kW Natural gas: 25 m³/h (80 mbar) N₂: 45–65 m³/h (max. 80 mbar) H₂: 0.5–15 m³/h (80 mbar) Cooling water: 3–5 m³/h (non-pressurized; temp.

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, suhu: 1.300 °C, berat benda kerja (maks.): 10 kg, panjang benda kerja (maks.): 250 mm, lebar benda kerja (maks.): 183 mm, tinggi benda kerja (maks.): 150 mm, No reserve price – guaranteed sale to the highest bidder! HIGHLIGHTS - Complete end-to-end solution including wash station and sintering unit (sintering core not included) - Machine has barely been used - Suitable for printing parts made of 17-4 PH stainless steel, D2/A2/H13 tool steel and copper TECHNICAL DETAILS Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Build volume: 300 x 220 x 180 mm Layer thickness: 50 µm and 125 µm after sintering Maximum part size: 250 x 183 x 150 mm, 10 kg Software: Eiger Cloud Sintering Sintering capacity: 3,020 cm³ (184 in³) Sintering surface: 348 cm³ Sintering duration: 26 hours Gases for sintering: Argon, Argon-hydrogen mixture Max. temperature: 1,300°C Isdpov Hpi Aofx Aahsik Washing Washing capacity: 18,356 cm³ Washing volume: 356 x 254 x 203 mm Basket: Stainless steel wash basket Fluid: Opteon SF79, Opteon SF80 or Tergo metal cleaning fluid MACHINE DETAILS Dimensions (printer): 575 x 467 x 1,120 mm Weight (printer): 75 kg Dimensions (wash station): 609 x 685 x 1,067 mm Weight (wash station): 136 kg Dimensions (sintering unit): 1,270 x 510 x 720 mm Weight (sintering unit): 136 kg EQUIPMENT - Printer + Wash-1 unit + Sinter-1 unit (without sintering core) - Dual-nozzle printing system - Heated build chamber - Vacuum-sealed build plate - Automatic leveling

Tahun pembuatan: 2023, Kondisi: baru, Electrically heated twin-lane pusher plate kiln, manufacturer Riedhammer Model: TP12.75/2x20/15-E-145 Condition: As new Overall length of kiln: 15.5 m Kiln width: 3.6 m Power supply: 400/230V, 50 Hz Connected load: 17 kVA Permitted voltage fluctuation: 10% Permitted frequency fluctuation: 1% Iiodpfx Aep T T Hnsahek PLC: SIEMENS/Comfort Panel TP1500-15 Product dimensions (L x W x H) Including pusher plate: 200 x 200 x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure equalization zone (1 segment): 750 °C Tmax main firing zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C Min. pusher time: 8 min Max. pusher time: 30 min Number of carrier plates: 266 pcs Channel height: 105 mm

Kondisi: baik (bekas), Binding and Sintering Furnace, manufacturer Nabertherm, in very good condition Type: LH 280/13 DBS Iisdpfx Aasmfn Rushek Max. temperature: 1300°C Internal dimensions (W x D x H): 750 x 750 x 500 mm External dimensions (W x D x H): 1250 x 1750 x 2100 mm Maximum loading weight: 150 kg Connected load: 44 kW Heating: 5-sided heating Control zones: 1 Weight: 700 kg Voltage: 400 V 3/N Rated current: 63 A - Through an air heater located below the furnace, preheated air at temperatures up to 400°C can be introduced into the furnace chamber during the debinding phase. - Adjustable cooling jacket with automatic ball valve - Automatic exhaust flap - Automatic off-gas flap - Monitoring of fresh air and exhaust gas volume flow as well as furnace chamber pressure via differential pressure monitoring. - The furnaces themselves, particularly the masonry, heating elements, and insulation, are in excellent condition with minimal or no operating hours, making them practically as new. - In order to operate these furnaces, it will be necessary to implement at least one temperature controller per furnace, a PLC, or a similar control system.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 55 kW (74,78 hp), Tahun pembuatan: 2025, Eine Kohlekugelmühle, auch als Kohlemahlmühle bekannt, ist eine Art Mahlwerk, das zum Mahlen und Mischen von Materialien für den Einsatz in der Erzaufbereitung, Farben, Pyrotechnik, Keramik und beim selektiven Lasersintern verwendet wird. Es handelt sich um ein zylindrisches Gerät, das Kohle, Erze, Chemikalien und andere Materialien mechanisch zerkleinert oder mischt. Hier sind die wichtigsten Merkmale und Aspekte einer Kohlekugelmühle: 1. Zylindrische Bauweise: - Die Kohlekugelmühle besteht in der Regel aus einem waagerechten zylindrischen Gehäuse. Die Innenfläche ist meist mit einem verschleißfesten Material wie Stahl oder Gummi ausgekleidet, um sie vor Abrieb zu schützen. 2. Mahlgutträger: - Als Mahlgutträger werden Stahlkugeln oder Keramikkugeln eingesetzt, die den Mahlprozess unterstützen. Durch die Drehung der Mühle fallen die Mahlkörper herab und zermahlen die Kohlepartikel. 3. Kohlezufuhr und Austrag: - Die Kohle wird üblicherweise über ein zentrales Einlaufrohr zugeführt, und die gemahlenen Kohlepartikel werden am Austragsende entladen. Während des Mahlprozesses wird die Korngröße der Kohle reduziert. 4. Rotationsbewegung: - Die Kohlekugelmühle dreht sich um ihre horizontale Achse. Die Drehung wird von einem Motor angetrieben, und die Geschwindigkeit kann zur Steuerung des Mahlprozesses und der Partikelgröße angepasst werden. 5. Luftstrom (Air Sweeping): - Einige Kohlekugelmühlen sind nach dem Luftstrom-Prinzip konstruiert. Luft wird in die Mühle eingeblasen, um das Trocknen und den Austrag des pulverisierten Kohles zu unterstützen. Dieses Design hilft, den Feuchtigkeitsgehalt der Kohle zu regulieren und fördert den Mahlprozess. Isdpjq Nf U Esfx Aahoik 6. Trocknen und Mahlen: - Neben dem Mahlen kann die Kohlekugelmühle auch eine Trocknungsfunktion besitzen. Das ist besonders wichtig, wenn die zu verarbeitende Kohle Feuchtigkeit enthält. Trocknung und Mahlen erfolgen oft gleichzeitig in bestimmten Kohlemühlen. 7. Steuerungssystem: - Moderne Kohlekugelmühlen verfügen über Steuerungssysteme zur Überwachung und Regelung wichtiger Parameter wie Drehzahl, Beschickungsrate und Temperatur. Dadurch kann der Mahlprozess optimiert und die Kohleverarbeitung effizient gestaltet werden. 8. Anwendung: - Kohlekugelmühlen kommen vor allem in kohlebefeuerten Kraftwerken und anderen Industrien zum Einsatz, in denen Kohle als Brennstoff verwendet wird. Sie sind Teil der Kohlemahlanlage, die Kohle zu feinem Pulver für die Verbrennung in Kesseln verarbeitet. 9. Sicherheitsmerkmale: - Sicherheitsfunktionen wie Überwachungsgeräte und Not-Aus-Systeme sind häufig in Kohlekugelmühlen integriert, um einen sicheren Betrieb zu gewährleisten. 10. Verschleißschutz: - In besonders beanspruchten Bereichen der Kohlekugelmühle werden verschleißfeste Materialien verwendet, um dem abrasiven Charakter der Kohle standzuhalten und die Lebensdauer der Mühlenkomponenten zu verlängern. Kohlekugelmühlen spielen eine entscheidende Rolle bei der Kohlezerkleinerung in Kraftwerken und tragen zur effizienten Verbrennung von Kohle zur Stromerzeugung bei. Das spezifische Design und die Ausstattung können je nach Hersteller und Einsatzbereich variieren.

Kondisi: bekas, jarak tempuh: 206.000 km, daya: 125 kW (169,95 hp), pendaftaran pertama: 11/2022, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 2, volume ruang muat: 15 m³, panjang ruang muatan: 4.430 mm, lebar ruang muat: 2.180 mm, tinggi ruang muatan: 1.780 mm, Tahun pembuatan: 2022, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: baru, Tahun pembuatan: 2025, OPTIturn TU 2004V – Lathe with Infinitely Variable Speed Control and Digital Speed Display Illustration shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precision Manufacturing Strongly ribbed, prism bed made of cast steel, induction-hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Iijdpfx Aocnxrcsahok Guaranteed spindle nose concentricity better than 0.009 mm Automatic longitudinal/lead screw feed With longitudinal, cross, and compound slides Forward-reverse switching via control panel Emergency stop slam switch Chuck guard Thrust bearing Lead screw supported in two sintered bearings Wide thread cutting range via change gear set Easy and quick speed change via V-belt Change gear transmission EMC filter class B (for use in private households) Equipment details: Digital speed display Clearly legible digital speed screen Chip guard on compound slide Four-way tool post rotatable Roll-threaded trapezoidal lead screw Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine graduation 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Taper roller bearings in P5 quality Cylindrical centering mount Hardened spindle nose with 21 mm spindle bore Lathe chuck Concentricity better than 0.04 mm Scope of delivery: 3-jaw chuck Ø 100 mm, self-centering Fixed center MK 2 Fixed center MK 3 Splash guard Chip tray 4-way tool post Change gear set Operating tools Model: OPTIturn TU 2004V Article No.: 3420310 Technical Data Electrical connection: 230 V / 1 Ph ~50 Hz Drive motor power, spindle: 600 W Spindle taper: MK 3 Spindle bore: 21 mm 3-jaw chuck through hole: 20 mm Tool post installation height: max. 12 mm Centre height: 100 mm Centre distance: 300 mm Max. turning diameter: 200 mm Swing over cross slide diameter: 110 mm Bed width: 100 mm Spindle speed: 150 – 2,500 rpm Speed steps: 2 steps, speed electronically adjustable Compound slide travel: 55 mm Cross slide travel: 75 mm Longitudinal feed range: 0.1 / 0.2 mm/rev Pitch – metric: 0.25 – 3 mm/rev (14 pitches) Pitch – imperial: 44 – 8 TPI (12 pitches) Tailstock taper: MK 2 Tailstock quill travel: 65 mm Dimensions (L x W x H): 830 x 425 x 360 mm Net weight: 61 kg

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, jam operasional: 7.508 h, unique-opportunity---showroom-demonstrator-from-official-dealer This unit originates from the demonstration showroom of a former official Markforged and DWS dealer, active on the Italian market until 2025. The machine has been used solely for demonstration purposes, is in excellent condition, and has very low operating hours. Now available through 3D Machineries Srl, this is a rare opportunity to purchase a virtually new industrial 3D printer at a fraction of the original price – with immediate availability and full transparency on provenance and usage history. -----LISTING DESCRIPTION----- Markforged – Complete Metal X 3D Metal Printing System (Printer + Wash Unit + Sintering Furnace + Accessories) 💰 Original value over €200,000 For sale is a complete Markforged Metal X system for metal 3D printing, including all necessary equipment for in-house production of metal parts using the bound metal printing process (FFF technology + debinding + sintering). ✅ The system originates from showroom usage and is in excellent condition. Sale of individual components can also be considered. The package includes: 🔹 Markforged Metal X 3D Printer 🔹 Markforged Wash-1 – Debinding wash unit for removing binder 🔹 Markforged Sinter-2 – Industrial sintering furnace Iisdpjwzmgtjfx Aahok 🔹 Argon gas control panel – with reducers and quick connectors 🔹 Original Markforged case – with spare build plates 🔹 Mobile casters for easy machine transport 🔹 Isolation electrical transformer Key technical data: Printer model: Metal X (F-PR-5101) Sintering furnace model: Sinter-2 (F-SR-0002) Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Furnace power supply: 200–240 V AC 30+PE | 347–415 V AC 30+N+PE / 30 A Certifications: CE, FCC, UL, RCM, UKCA Assembled in the USA ✅ The Metal X system supports printing in stainless steel (17-4 PH, 316L), pure copper, Inconel, and tool steel ✅ Ideal for machine shops, R&D departments, prototyping centers, and companies in the aerospace and automotive sectors 💡 Original value of the complete package exceeds €200,000. 📦 Possibility to sell items separately: printer, wash unit, sintering furnace, accessories. 📩 Contact us to receive a detailed price list, images, videos, operating hours, or to schedule a visit.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SP0119240003037, Tahun pembuatan: 2019, tegangan masuk: 240 V, Perlengkapan: Penandaan CE, Sistem pencetakan 3D logam Bound Metal Deposition™ terdiri dari: Iodpfx Asxlcldeahjik - printer - debinder - tungku sintering - konverter frekuensi untuk suplai daya tungku pada 60Hz. Sistem dalam kondisi sempurna, digunakan untuk R&D di lingkungan ber-AC. Printer dilengkapi dengan 2 nozzle berdiameter 0,40 mm dan satu nozzle definisi tinggi berdiameter 0,25 mm. Tungku dilengkapi dengan sistem suplai gas teknis dari instalasi eksternal. Set suku cadang asli untuk tungku (ceramic setter, rak retort dari grafit, seal, filter, oli pompa vakum). Firmware telah diperbarui ke versi terbaru untuk seluruh sistem. Kartrid material yang disertakan: 1x AISI 316L 1x 17-4PH 1x kartrid penyangga keramik

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jumlah laci: 8, The item for sale is a storage rack for storing glass sheets (160 cm x 255 cm) in crates (8 x 2500 kg): glass, quartz sinter, polycarbonate, furniture boards, stone, or other panel materials. The rack features movable, slightly inclined drawers. This design allows you to save up to 75% of floor space, as all drawers are aligned parallel to each other and spaced just 10 millimeters apart. We offer various dimensions and capacity versions. Upon request, we can also manufacture a storage rack with custom specifications tailored to your individual requirements and conditions. This storage system is especially recommended for glass, stone, furniture, and advertising companies that prioritize efficient space utilisation. Ijdpfsgfm I Ejx Aaheik

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, de Iedpfjq Nfbhsx Aaheik

Kondisi: bekas, jarak tempuh: 251.500 km, daya: 120 kW (163,15 hp), pendaftaran pertama: 06/2015, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, inspeksi berikutnya (TÜV): 03/2023, warna: coklat, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang ruang muatan: 4.320 mm, lebar ruang muat: 2.130 mm, tinggi ruang muatan: 2.070 mm, Tahun pembuatan: 2014, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: sangat baik (bekas), EOS Model: EOS M270 Metal Laser Sintering System Laser Sintering Unit 200 Watt Yb Fiber Laser Material processed with this unit: Tungsten Laser hours: 8,018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-theta lens, high-speed scanner The system has been retrofitted with a Scanlab hurrySCAN 30 for improved print accuracy. Focus diameter: 100 μm Iiodpfx Aasu Ebpcehok Dimensions (W x D x H) System: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please refer to the manufacturer’s documentation. Scope of delivery: EOS M270, chiller, and software Condition: used (Specifications and technical data subject to change and possible errors) If you have any further questions, we will be happy to answer them by phone.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2014, panjang total: 1.100 mm, tinggi total: 1.510 mm, lebar total: 850 mm, berat keseluruhan: 160 kg, We are offering an unpacking and sieving station, as well as an unused drum mixing station from EOS GmbH. This mixing station is specifically designed for use with wide-neck drums. It enables efficient mixing of sieved recycled powder with virgin powder over a set period. The processed powder can then be used in EOS Formiga P100 or P110 systems. Iedpfoxzpw Sex Aahjik The unpacking and preparation station consists of: • an unpacking area • a sieving unit for used powder • a feeder for virgin powder • and a scale for preparing plastic powder. After removal from the machine, the cooled exchange frame is inserted into the unpacking and preparation station. By progressively raising the build platform using a foot pedal, the powder bed with the components is pushed out of the exchange frame. The sintered components are manually unpacked from the powder bed. Reusable recycled powder from the powder bed is swept onto the adjacent perforated plate and falls through a hose into a sieving bowl. The used powder is sieved into the powder container positioned on a scale beneath the sieving unit. The amount of sieved recycling powder can be precisely determined using the scale. Subsequently, a previously determined quantity of virgin powder is added to the recycling powder in the powder container by turning the hand crank. The prepared plastic powder must then be mixed in the mixing station before it can be returned to the build process. Mixing station We are offering an unused drum mixing station from EOS GmbH. On the mixing station, virgin and recycled powder—filled into powder containers by the unpacking and preparation station—are mixed. A powder container is placed or rolled onto the mixing station and then continuously rotated for a preset period. Once the set mixing time has elapsed, the station stops, and the powder container can be removed.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, panjang total: 1.480 mm, tinggi total: 2.040 mm, lebar total: 850 mm, berat keseluruhan: 360 kg, tegangan masuk: 220 V, arus masuk: 32 A, en1 Iodpfx Aot H I Tvoahsik

Kondisi: baru, Tahun pembuatan: 2025, DE-CORMAK_HBS260_Bandsäge zum Schneiden von Rohren, Profilen und Stangen wird in allen Schlosserwerkstätten eingesetzt, in denen Präzision, Qualität und Schnittgeschwindigkeit entscheidend sind. Das Modell verfügt über einen 0-60° schwenkbaren Sägebügel. Das stabile Gestell gewährleistet präzisen und geräuscharmen Betrieb. Herausnehmbarer Spänebehälter für eine einfache Reinigung! Maschineneigenschaften Der horizontale Metallbandschneider mit schwenkbarem Arm ermöglicht das Sägen sowohl rechtwinklig als auch in jedem Winkel von 0 bis 60° zur Achse des Werkstücks. Das Material wird manuell oder durch ein mechanisches Fördergerät zugeführt, der Werkzeugvorschub erfolgt automatisch. Die Bandführungen sind mit speziellen Hartmetallplatten und Wälzlagern ausgestattet, was die Bandführung, Lebensdauer, Geradheit sowie Schnittqualität maßgeblich verbessert. Die Hartmetallführung reduziert den Verschleiß von Maschine und Bandsäge erheblich. Ausgerüstet mit leistungsstarker Kühlmittelpumpe und geschlossenem Kühlkreislauf. Der aus einteiligem Guss gefertigte Bügel garantiert zusammen mit dem 27 mm breiten Sägeblatt eine zuverlässige Serienbearbeitung von Profilen und Vollmaterialien. Der Schraubstock ist in einem verstellbaren Bett und mit Schnellspannvorrichtung ausgestattet. Die Bandführungen bestehen aus Hartmetallplatten (gesinterte Hartstoffe) und einem Wälzlagerführungssystem. Entscheidend für Präzision und Geradheit ist die ZENTRIERTE HARTMETALLFÜHRUNG. Die Oberseite des Maschinensockels bildet eine Wanne zum Auffangen von Kühlmittel und Spänen. Ein Gusstisch mit Schwenkarm und separatem Bedienfeld ist am Sockel angebracht. Beim Sägen sorgt die Bewegung des Bandes und das Absenken des Arms für den Schnitt. Die Absenkgeschwindigkeit (Schnittfortschritt) wird durch einen Hydraulikzylinder geregelt. Die Vorschubgeschwindigkeit ist über das Bedienfeld stufenlos einstellbar. Zwei Schnittgeschwindigkeiten wählbar: 35 und 70 m/min. Nach Beendigung des Schnitts schaltet der Antrieb im unteren Endpunkt automatisch ab. Sicherheit gewährleisten Bandabdeckungen und Mikroschalter, die den Motor nach Zyklusende oder bei Öffnen der Abdeckungen stoppen. Der Bandsägenantrieb wird zudem bei Bandbruch automatisch abgeschaltet. Iisdpfxemrnk Ej Aahsk Bandsägeblattmaße [mm]: 2520 x 27 x 0,9 Bandspannung: mechanisch (manuell) Bandgeschwindigkeiten [m/min]: 35, 70 Absenkung: stufenlos/hydraulisch Schraubstockhöhe [mm]: 860 Sägeraddurchmesser [mm]: 300 Rahmenschwenkung [°]: 0-60 Spannung: 3~400V Hauptmotorleistung [kW]: 1,1/1,5 Kühlmittelpumpe [kW]: 0,05 Außenmaße [cm]: 150x80x140 Gewicht brutto/netto [kg]: 210 / 180 *Bitte beachten Sie: Die Maschine wird standardmäßig ohne CEE-Stecker geliefert, da es verschiedene Typen gibt. Wenn Sie einen Stecker benötigen, teilen Sie dies dem Verkäufer bitte vor dem Kauf/direkt bei Auftragserteilung mit. Preise sind Nettopreise. Die Versandkosten sind nicht enthalten. Für weitere Informationen kontaktieren Sie uns gerne telefonisch oder per E-Mail. Unser gesamtes Angebot finden Sie auf unserer Website.

Kondisi: bekas, de-DE-translate-001 Iijdpfx Aaexzh H Eshsk

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), Product: Electrosinter Iedpsg R Sh Ajfx Aahoik Year of manufacture: 1995 Air transport: 2 x 9,000 m³ Chamber volume / capacity: 32 m³ Furnace opening: 1200 x 1200 mm // 80 x 1500 mm Heating capacity: 55-160 kW, G20 natural gas Air temperature: 170-220 °C Casing dimensions: 2,600 x 10,300 x 3,600 mm Control cabinets included. Requires electronic and mechanical refurbishment.

Kondisi: sangat baik (bekas), EOS Metal Laser Sintering System We offer an EOS Metal Laser Sintering System for sale. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scanning speed: up to 7.0 m/s Build volume: Ø80mm x 100mm System dimensions (W x D x H): 800 mm x 950 mm x 1,850 mm Installation footprint: 1000mm x 3000mm x 2500mm Iodpeqzgvhofx Aahjik Weight: approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Maximum power consumption: 2.3 kW, 13A Scope of delivery: see images Condition: pre-owned / used (Specifications and technical details are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 525389e4-9874-4408-810c-82126df2811f, Tahun pembuatan: 2020, jam operasional: 7.508 h, berat keseluruhan: 75 kg, tinggi dalam: 180 mm, panjang dalam: 300 mm, lebar dalam: 220 mm, Perlengkapan: Penandaan CE, Barely used showroom complete system consisting of the following components: Markforged Metal X 3D Printer Markforged Wash 1 Debinding Unit Markforged Sinter 2 Industrial Sintering Furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build Volume: 300 x 220 x 180 mm Printing Process: Atomic Diffusion Additive Manufacturing (ADAM) Build Chamber: Heated Build Plate: Heated, vacuum-sealed, with automatic leveling Print System: Dual nozzles – for metal material and release material Print Materials: Stainless steel 17-4 PH, 316L, Tool steel H13, A2, D2, Inconel 625, Copper, Titanium-6Al-4V Media Supply: Filament feed, bound powder material Part Properties Maximum Part Size: 250 x 183 x 150 mm Layer Thickness: 50 micron and 125 micron MACHINE DETAILS Dimensions & Weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Iisdexu Ewzepfx Aahsk Software: Eiger Cloud Printer Power Supply: 100–240 V / 50–60 Hz / 12.6 A Certificates: CE, FCC, UL, RCM, UKCA Safety Features: Two-factor authentication, organization admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobility casters Isolation transformer

Kondisi: baru, Tahun pembuatan: 2025, CORMAK HBS260 band saw for cutting pipes, profiles, and rods is widely used in all locksmith workshops where precision, quality, and cutting speed matter. This model features a swiveling arm 0-60°. The frame design ensures accurate and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics: Iedpfeudi Uzox Aahsik The CORMAK HBS260 is a horizontal metal band saw with a swiveling arm, enabling cutting perpendicular to the axis of the material or at any angle from 0 to 60°. Material can be fed manually or by any mechanical means, while the tool feed operates automatically. The blade guides are equipped with special carbide plates and bearings, significantly enhancing blade guidance, longevity, straightness, accuracy, and cut quality. Carbide blade guides greatly reduce machine and blade wear. The unit is equipped with a high-performance coolant pump with a closed-loop coolant system. The saw arm is made from a solid cast-iron piece, paired with a 27 mm wide blade, allowing for efficient high-volume cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features quick clamping. The blade guides utilize hard metal (carbide) plates and a rolling bearing system. It is the CARBIDE BLADE GUIDES that are responsible for the saw’s precision and straightness. The upper part of the base is shaped to form a tray for collecting coolant and chips generated during cutting. Attached to the base is a cast iron worktable with a swiveling arm and a control panel mounted on a separate arm. During cutting, the main cutting movement is provided by the moving blade, while the feed is controlled by the arm's descent. The descent speed of the arm (cutting speed) is adjustable using a hydraulic cylinder. Feed speed is controlled from the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. In the lower position of the arm (after cutting is complete), the blade drive is automatically switched off. Safety is ensured by blade covers and micro-switches that stop the motor after the cutting cycle is finished or when any of the covers are opened. Additional protection includes an automatic stop in case the blade breaks. Blade size [mm]: 2520 x 27 x 0.9 Blade tension: mechanical (manual) Blade speeds [m/min]: 35, 70 Arm descent control: stepless, hydraulic cylinder Vice base height [mm]: 860 Saw wheel diameter [mm]: 300 Saw frame swivel [°]: 0-60 Power supply: 3-phase, 400V Main motor power [kW]: 1.1 / 1.5 Coolant pump motor power [kW]: 0.05 Dimensions with base [cm]: 150 x 80 x 140 Weight [kg] (gross/net): 210 / 180 kg Accessories included: 2 x M42 saw blades 5L Emulgol coolant ZW580 magnetic chip collector

Kondisi: sangat baik (bekas), EOS Metal Laser Sintering System We offer an EOS Metal Laser Sintering System for sale. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scanning speed: up to 7.0 m/s Build volume: Ø80mm x 100mm System dimensions (W x D x H): 800 mm x 950 mm x 1,850 mm Installation footprint: 1000mm x 3000mm x 2500mm Weight: approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Maximum power consumption: 2.3 kW, 13A Scope of delivery: see images Condition: pre-owned / used (Specifications and technical details are subject to change and errors excepted!) For further questions, feel free to contact us by phone. Iisdpfjqy Edysx Aahek

Kondisi: sangat baik (bekas), Complete Desktop Metal 3D Printer System Here we offer you a complete Desktop Metal 3D printer system. Desktop Metal 3D Printer Studio System Complete system: 3D printer + debinding machine + sintering furnace Manufacturer: Desktop Metal The three-part solution comprises a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: - Printed materials: Metal - Technology: FDM - Application: Industrial - Other features: Office-compatible - X-axis travel: 30 cm (12 in) - Y-axis travel: 20 cm (8 in) - Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, this printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements commonly associated with metal 3D printing and enables new features such as the use of closed-cell infill for lightweight, strong parts. 1.2 Desktop Metal Studio Debinder (Debinding Machine) - Fully automatic debinding - Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic fluid distillation and recycling means no refilling is required between cycles. Isdpfjk Hz Nqox Aahsik 1.3 Desktop Metal Studio Sintering Furnace - Hybrid technology (microwave & conventional heating elements) - Build volume: 305x205x205 mm - Carbon steel housing - Gas supply: 2 x 900 L gas cylinders - Heating power: 20 kW Features: - Function: Sintering - Configuration: Chamber - Heat source: Gas - Other features: High-temperature, automatic - Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace delivers industry-grade sintering in a package suitable for office environments. Built-in, material- and build-specific temperature profiles ensure uniform heating and cooling, avoiding residual stresses typical of laser-based systems. Condition: used / gebraucht Scope of delivery: (see picture) (Subject to modifications and errors in technical data, specifications are subject to change!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), EOS Metal Laser Sintering System We offer an EOS Metal Laser Sintering System for sale. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scanning speed: up to 7.0 m/s Build volume: Ø80mm x 100mm System dimensions (W x D x H): 800 mm x 950 mm x 1,850 mm Installation footprint: 1000mm x 3000mm x 2500mm Weight: approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Maximum power consumption: 2.3 kW, 13A Scope of delivery: see images Condition: pre-owned / used (Specifications and technical details are subject to change and errors excepted!) Iodpfoqzgvajx Aahjik For further questions, feel free to contact us by phone.