Beli Tabung Hampa Udara bekas (3.093)

Kondisi: bekas, Daftar ini untuk Jun-Air 6-J mini Kompresor Udara. Ijdpfx Aoxzg Sasa Njht

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, Kami menawarkan tabung drum pengering bekas tanpa rangka dasar dan tanpa penggerak. Panjang: 10.900 mm, diameter dalam: 2.500 mm. Ihedpjx N Ia Rofx Aa Njt

Kondisi: bekas, jarak tempuh: 96.726 km, daya: 92 kW (125,09 hp), pendaftaran pertama: 12/2016, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, jarak roda: 3.682 mm, kelas emisi: Euro 5, Perlengkapan: ABS, komputer bawaan, sistem immobilizer,

Kondisi: baru, nomor mesin/kendaraan: WKA 10+, AC dari ruang bersih teknologi medis plastik. 3 unit benar-benar baru. Disimpan sebagai perangkat cadangan di gudang pemeliharaan. Ihodpfx Aaexau U Te Not

Kondisi: sangat baik (bekas), schleiftrommel-gummilufttrommel-original-produkt-der-firma-ked-k urt-ehemann Ihsdpfsb A S Rfex Aa Njt

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Ijdpfxjvz Hq Tj Aa Noht Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: bekas, Listing ini untuk MMM Stericell Hot Air Sterilizer. Ijdpfxexzg N Ee Aa Noht Kondisi kerja dan tampilan baik. Sterilisator udara panas STERICELL® dirancang untuk digunakan di fasilitas kesehatan untuk proses sterilisasi alat medis, baik tanpa maupun dengan kemasan, termasuk alat invasif yang direkomendasikan oleh pabrikannya untuk steril dengan udara panas/panas kering.

Kondisi: bekas, 4 pieces of Elmo Rietschle 539283 air filters for vacuum pumps or similar applications. Ihsdpfx Aaeqzmtno Njt

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, jam operasional: 13.000 h, nomor mesin/kendaraan: 0781001071006, daya laser: 3.000 W, Diameter pipa (maks.): 200 mm, daya: 3 kW (4,08 hp), masa garansi: 1 bulan, tahun perombakan terakhir: 2024, persyaratan ruang panjang: 19.000 mm, lebar yang dibutuhkan: 6.000 mm, Perlengkapan: dokumentasi / manual, unit pendingin,

Tahun pembuatan: 2005, Kondisi: bekas, Kapasitas 500 liter Tekanan kerja 11 bar Rentang suhu -10 hingga +50 °C Dimensi (PxLxT): 1,8 x 0,8 x 0,8 m Berat sekitar 200 kg Isdpfxsv Rrrnj Aa Neht Tangki udara bertekanan bekas dari Maschinen- und Behälterbau Mittweida GmbH. Terdapat manometer untuk penunjukan tekanan, 4 koneksi pengambilan, 1 koneksi suplai. Ini adalah tangki bekas, oleh karena itu kami jual tanpa jaminan apa pun. Dealer dengan stok dan ruang pameran seluas 1.600 m².

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar total: 913 mm, panjang total: 634 mm, tinggi total: 1.700 mm, masa garansi: 12 bulan, sambungan udara terkompresi: 6 batang, berat keseluruhan: 200 kg, daya: 1,9 kW (2,58 hp), tegangan masuk: 230 V, Mesin pengisi tabung semi-otomatis. Efisiensi hingga 13 tabung per menit. Dosis dari 5ml hingga 270ml Diameter tabung dari 19mm hingga 50mm Tinggi tabung dari 70 hingga 210mm Dibuat di Polandia Mesin tersedia untuk dilihat dan diuji di lokasi perusahaan. Jedliński Packaging sp. z o.o. ul. Wodna 3 Iodpfxexx Uiho Aa Noht 05-090, Raszyn Polandia

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. Ihedpfx Ajvz Hq Hsa Net A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: bekas, de Ihjdpfxoxv D Eyo Aa Net

Kondisi: bekas, 2 pieces of air filters Elmo Rietschle 84524 / 0001 for vacuum pumps or similar applications. Isdoqzmtrspfx Aa Njht

Kondisi: baik (bekas), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Ideal for building demolition shears, scrap shears, or branch cutters Ijdpfx Aajb A Hufe Neht -Connections via the piston rod -Piston diameter: approx. 150 mm -Piston rod diameter: 80 mm -Stroke: approx. 420 mm -Total extended length: 1800 mm -Ideal for machines where the piston rod needs to be protected -Quantity: 6 units available -Price: per unit

Kondisi: baru, Features: Bending radii: R10 to R200 (minimum R = 1.8xD) (depends on wall thickness, material, and tube diameter) Max. bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30 programs with 9 bends each Control: NC1 Bending direction: counter-clockwise Usable length (available in different lengths as required): 1.5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3m version) Weight: approx. 600 kg (with 3m mandrel) NOTE: The stated price refers to 1.5 m length. Other lengths available on request! Early mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Capacity: Iodpfx Aasuudrko Neht Hard copper and aluminum: 60 x 4 mm Steel tube: 60 x 3 mm Stainless steel: 60 x 2 mm Scope of delivery: Machine Standard accessories (including foot switch, operating manual, 2 hex keys, 4 sets of chuck jaws, bending grease, 25 mm mandrel rod) Delivery without hydraulic oil

Kondisi: baru, Tahun pembuatan: 2025, Firebox output: 49 kW Working output: 45 kW Brand new in original packaging: Yes Warm air blower, flue gas fan, electronic control with digital display: included Intake air filter, recirculation intake filter: large-surface intake filter with no loss of performance / included Warm air ducting pipes: 2 x 200 mm with plug-in, freely rotatable 90° bends Flue outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Air delivery: 3500 m³/h Intake air filter: Yes, large-surface intake filter with no loss of performance Power consumption: 550 W Designed for room volume: 1000 m³ Ihodpfspn Nyzsx Aa Net Weight: 310 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. Ihsdpovz Hqyofx Aa Net All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: bekas, Dieses Angebot betrifft den Churwell PBI Luftkeimsammler SAS Super mit Koffer und Ladegerät. Das Gerät befindet sich in einwandfreiem Arbeitszustand und ist sofort einsatzbereit. Churwell PBI Luftkeimsammler SAS Super 100 L, inkl. Koffer und Ladegerät Ijdoxv Dpxopfx Aa Noht Der Churwell PBI Luftkeimsammler SAS Super 100 ist ein weit verbreitetes mikrobiologisches Luftprobengerät für den Einsatz in Reinräumen, pharmazeutischen Umgebungen, Operationssälen und Laboren. Er ermöglicht eine zuverlässige Überwachung der Luftqualität durch das Sammeln luftgetragener Mikroorganismen auf Kontaktplatten oder Petrischalen. Hauptmerkmale: Probennahmeprinzip: Ausgelegt zur Erfassung luftgetragener Mikroorganismen auf mikrobiologischen Agar durch Impaktion mittels kontrollierter Luftansaugung. Hohe Probeneffizienz: Die SAS Super Modelle – wie SAS Super 100 und SAS Super 180 – erfassen Partikel bis zu einer Größe von 1 Mikrometer. Das SAS Super 100 ermöglicht eine Probenahme von 100 Litern Luft pro Minute. Digitale Steuerung: Digitale Benutzeroberfläche zur Einstellung des Probenvolumens, der Dauer und zur Speicherung von Bedienerdaten. Akkubetrieben: Mit wiederaufladbarem Akku für mehrere Messungen pro Ladung. Ladegerät ist im Lieferumfang enthalten. Portabilität: Leichtgewichtig und kompakt im Schutzkoffer – ideal für den mobilen Einsatz oder die Überwachung von Reinräumen vor Ort. Technische Daten: Luftdurchsatz: 100 Liter pro Minute Abmessungen: 10,5 × 11 × 29 cm Gewicht: 1,75 kg Datenmanagement: Einige Modelle unterstützen Datenlogging und erfüllen CFR 21 Teil 11 (modellabhängig) Materialien: Typischerweise Edelstahl oder autoklavierbare Werkstoffe für sterile Umgebungen Zubehör & Optionen: Ansaugköpfe (Edelstahl oder Einweg) Stative und Halterungen Kalibrieradapter USB-Datenkabel (für Modelle mit digitaler Protokollierung)

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. Ihodpfx Asvz Hqtoa Njt - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: bekas, Listing ini untuk Peak Scientific Corona Nitrogen Generator 1010 yang dipasangkan dengan Corona Air Compressor. Unit dalam kondisi berfungsi penuh dan siap untuk segera digunakan. Detail Sistem: Peak Scientific Corona Nitrogen Generator 1010, dipasangkan dengan Corona Air Compressor, dirancang untuk memenuhi kebutuhan laboratorium yang memerlukan nitrogen kemurnian tinggi, khususnya untuk aplikasi seperti kromatografi. Corona 1010 sangat ideal untuk Thermo Scientific Corona Veo Charged Aerosol Detector dan juga cocok untuk aplikasi LC, HPLC, dan UHPLC, menyediakan aliran nitrogen hingga 5 L/menit pada 80 psi. Ihsdpfx Asxwc Iisa Nst Fitur Utama: Aliran Gas Maksimum: 5 L/menit Tekanan Keluaran Maksimum: 80 psi (5,5 bar) Kemurnian Maksimum:

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. Ihsdpfx Ajvz Hqmoa Not The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: bekas, de Ihedpfx Aajxv Abaj Net

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. Iedpfx Aovz Hqgja Noht These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar Ihsdpfevz Hhxjx Aa Net - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.