Beli Tepi Banding Mesin bekas (87.713)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Klein – Edge Banding Machine KTD51 for Shaped Moldings and Straight Edges, with Direct Glue Application. Gsdpfx Adovf H I Tjqskc Minimum workpiece length: 160 mm. Workpiece thickness: 10–40 mm. Edge thickness: 0.5–1 mm. Inner radius: approx. 25 mm. Year of manufacture: 1993. Feed rate adjustable: 4–9 m/min. Power: 2.6 kW, 400 Volt.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, nomor mesin/kendaraan: 0-261-20-4583, Edge banding machine BRANDT, model KDN 200 Ambition 1200, used Year of manufacture: 2010 Operating air pressure: 6 bar Gjdpfx Adoh Ak D Uoqokc Power supply: 400V, 3-phase, 50 Hz Total connected load: 4 kW Workpiece thickness: 0.3 / 0.4 up to 8.5 mm Extraction port diameter: 3 x 60 mm Working height: 950 mm Feed speed / Edge banding speed: 10 m/min Coil tape thickness: max. 0.4 mm – 3.0 x 45 mm Noise emission: 84 to 87 dB(A) Transport/overall dimensions (LxWxH): 3,450 x 1,300 x 2,180 mm Net weight: 1,200 kg Processing units: Gluing, End trimming, Top & Bottom trimming, Scraping Price: 4,900 EUR plus VAT (negotiable), FCA: Oradea/Romania Subject to errors, technical modifications, and prior sale. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim româna.

Kondisi: sangat baik (bekas), Table-top edgebander JAROMA + edge milling machine with trimming unit Catalogue No. 7729A Gkodpfx Aoxa Eh Dedqoc Edgebander: Equipment: - Tape holder plate - Glue tank (granulate) - Tape feeder - Guillotine – preliminary trimming of the edge band - Pressure rollers: 2 pcs - Min. workpiece width: 50 mm - Workpiece thickness: 10–40 mm - Min. internal radius: 50 mm - Edge banding at an angle with 1 mm thick edge: 0–45° - Edge thickness: 0.3–3 mm - Electric feed - Total power: 2 kW - Compressed air pressure: 6–7 bar - Dimensions (LxWxH): 1700 x 1300 x 1550 mm - Weight: 310 kg Edge Milling Machine: - Min. workpiece width: 50 mm - Workpiece thickness: 16–40 mm - Edge thickness: 0.5–3 mm - Motor power: 1.1 kW - Air requirement: 6 bar - Extraction port: 60 mm - Dimensions (LxWxH): 1900 x 850 x 1450 mm - Weight: 290 kg Trimming Unit: - Blade diameter: 150 mm - Table dimensions: 750 x 820 mm - Motor power: 0.12 kW / 2800 rpm – Made in Poland – Unpainted – DTR documentation included – Very good condition – Used edgebander Net price: 11,000 PLN Net price: 2,590 EUR at 4.25 EUR exchange rate (Prices may vary depending on exchange rate fluctuations)

Kondisi: baik (bekas), Tahun pembuatan: 2005, Edge thickness from up to 3 mm Workpiece thickness from up to 6-45 mm Total length 3250 mm Feed speed 8 m/min Gkedpfswxfnwjx Adqjc Weight 700 kg - PLC control - Sensing nozzle - Multifunctional milling unit - Extendable support

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 9.300 mm, berat keseluruhan: 4.000 kg, 1 Godpfxew Sdlms Adqokc

Kondisi: bekas, 1 Gedpfexbf Sxox Adqjkc

Kondisi: baru, Tahun pembuatan: 2024, NEW MACHINE ENQUIRIES: Please understand that we only offer this new machine within our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Enquiries from outside these regions will not be answered. ----- New machine Year of manufacture: 2024 Features and technical data: - Base machine 1057 XL C with Beckhoff touch-screen control - Extendable workpiece support, 600 mm - Extension for extendable support arm - Standard infeed fence - 3 LED lights in the infeed area - Jointing unit with 2 motors - DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation - Edge feeding unit 1903, fully automatic - Glujet 301 adhesive application system - Automatic reloading function - Magazine for 1.4 kg cartridges (4 cartridges capacity) - GluJet collection container - Pressure unit 1912-3, pneumatic - GM 201 spraying device after pressure unit - 1918 cross-cut unit, pneumatic Gkedpsw I U Rfofx Adqec - Extraction hoods for cross-cut unit - FR201 combination milling unit with DIA cutters R=2 mm - 1832 contour milling unit - Shelf program - ZK 301 radius scraper blade - Chip collection box - FK 701 flat scraper blade - TR201 spraying devices, front and rear - 1940 buffing unit Availability: short notice Location: Flörsheim

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: T/41242, tinggi benda kerja (maks.): 52 mm, ketebalan tepi (maks.): 12 mm, tinggi kerja: 880 mm, berat kosong: 3.000 kg, kecepatan throughput: 233 mm/dtk, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Operating mode: Single-sided, right-hand version Edge thickness: 0.2 – 12 mm Workpiece dimensions Minimum width: 70 mm Minimum height: 8 mm Maximum height: 52 mm Minimum length: 150 mm Feed speed: 10 – 14 m/min Gsdpfxoxa Acre Adqskc Working height: 880 mm MACHINE DETAILS Processing units Jointing unit with 2 HF motors, 1.5 kW each Double end trimming unit with 2 HF motors, 0.3 kW each Flush milling unit with 2 HF motors, 0.7 kW each Fine trimming unit CHAMFER with 2 HF motors, 0.3 kW each Fine trimming unit RADIUS with 2 HF motors, 0.3 kW each Corner rounding unit with 2 motors, 0.35 kW each Scraper unit for plastic edges Dimensions & Weight Machine dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine weight: 3,000 kg Operating voltage: 400 V, 50 Hz Total connected load: 12 kW Electrical connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic coil magazine for coils up to 800 mm diameter with pneumatic cut-off device for up to 3 mm thickness Automatic edge magazine with optical monitoring for fixed-length strip edges Infeed fence with automatic positioning when inputting the jointing value CM – CombiMelt – gluing system in modular design Control system via 7-inch TFT color touch display 100 working programs can be freely saved alphanumerically PLC for high-resolution route control Individual inverters for selective activation of processing motors Hole detection to skip CNC machining operations Network capability for integration into a data network

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Double-sided edgebander Stefani Evolution C Year of manufacture: 2012 Technical condition: very good The Stefani Evolution C is designed for precise edgebanding of straight and shaped edges on furniture panels made from various materials, such as particle board, MDF, or plywood. Equipped with advanced features and high-quality construction, this machine ensures excellent results in the production of office, kitchen, bathroom furniture, and other interior fittings. Gsdpfx Asu U N Agjdqjkc Maximum working width: 3200 mm Minimum working width: 225 mm PC control Stefani Winedge plus v06.14.000 software Longitudinal processing Cross processing

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, ketebalan tepi (maks.): 3 mm, berat keseluruhan: 11 kg, jenis arus masuk: AC (pendingin udara), sambungan udara terkompresi: 6 batang, jenis penyesuaian ketinggian: mekanis, tegangan masuk: 230 V, tinggi kerja: 65 mm, daya: 3,6 kW (4,89 hp), The perfect invisible joint - For laser edges / hot-air edges / co-extruded edges - Up to 65 mm edge height - Up to 3 mm edge thickness - Mobile or stationary use - Tool-free conversion Gsdpfx Ador H Ealeqskc - Up to 3 mm edge thickness - Approx. 4 min heating time - 230 V / 50 Hz

Kondisi: bekas, Tahun pembuatan: 2009, 04487 Format4 Perfect 50 Edge Banding Machine Used, year of manufacture: 2009 114 operating hours Touch screen color display Panel thickness: 10 - 55 mm Minimum panel width: 60 mm Minimum panel length: 140 mm Edge thickness: 0.4 - 8 mm Edge height: 12 - 63 mm Variable feed speed from 12.5 m/min Spraying of separating and cleaning agents - Workpiece chain conveyor - Glue roller and glue unit, Teflon-coated, for EVA hot melt adhesive - Pressure unit - Guillotine for pre-cutting - Pneumatically controlled cross-cut saw unit, tilting 0° - 15° - Combination milling unit for flush and radius trimming, tilting up to 15° Gksdsxbf S Eopfx Adqjc - Scraper unit - Polishing unit - Hot air unit Extraction connection diameter: 2 x 120 mm Operating manual and electrical diagram available Transport dimensions approx. 4250 x 1100 x 1700 mm (LxWxH) Weight approx. 1200 kg To avoid misunderstandings, an on-site inspection by appointment is possible and recommended Sale is as-is Technical details, condition description, year of manufacture, and scope of delivery as per manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty on used machines; it is sold "as inspected" Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex stock

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, OTT Tornado Top edge banding machine in top condition PU glue pot with separating agent unit, also suitable for EVA adhesive. In September 2024, we had the entire machine recalibrated. During this process, the gluing unit was renewed. The results are perfect with transparent glue, and outstanding with white panels using white glue. The machine operates flawlessly and without any faults. Technical specifications: Edge thickness: 0.4 - 8 mm Gkjdpsv Sm Hcsfx Adqec Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm End trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper Buffing unit 3-way spray unit Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm Weight: 3100 kg - Immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, HOLZ-HER Sprint 1329 - Mesin edge banding bekas dalam kondisi baik. - Tahun pembuatan: 2015 - Termasuk konveyor balik BARBARIC (tahun 2017) - Tersedia mulai akhir November/awal Desember 2025 Silakan hubungi kami jika ada pertanyaan. Gkodpjxducrsfx Adqec

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft operations. The F 5 ensures edge processing at every step, as it comes equipped with all the components required for your application: jointing cutter, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even more flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Gedslht Hwjpfx Adqjkc Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: Hebrock F5 Next – 10 m/min F5 Next Edge Banding Machine With PLC control (including touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change pre-installation including glue discharge device, HF end trimming unit (approx. 12000 rpm), HF milling unit (approx. 12000 rpm) with separate pneumatic height adjustment and interchangeable cutter block (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding F5/08/5 Additional interchangeable motor corner rounding unit with tool setup F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit separating agent F5/24/2 Spray unit cleaning agent F5/25 Spray unit edge F5/27 Nesting for milling and radius scraper F5/30 Pneumatic three-point adjustment (radius-, bevel-, and flush trimming) Location: Ex-stock 54634 Bitburg - Available in calendar week 4 -

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, kecepatan pemakanan sumbu X: 12 m/menit, panjang total: 4.500 mm, tinggi benda kerja (maks.): 60 mm, lebar total: 1.200 mm, ketebalan tepi (maks.): 10 mm, jenis penyesuaian ketinggian: mekanis, daya: 11 kW (14,96 hp), Ketebalan tepi maks: 10 mm Ketebalan panel maks: 60 mm Ketebalan material roll maks: 3 mm Kecepatan maju maks: 12 m/menit Penyesuaian tinggi: manual Sistem lem granulat: bak lem bawah Bak lem sistem ganti cepat: Ya Magazin strip: Ya Unit joiner milling: Ya Unit gergaji potong: 2 motor Rata/Radius Unit scraper: scraper profil, scraper flat, Ya Unit pemoles: Ya Gkodpsw Av E Iofx Adqec Tipe: Mesin sisi kanan Panjang mesin: sekitar 4.500 mm x 1.200 mm Kontrol: FORMAT 4 E-MOTION Harga belum termasuk PPN Mesin masih beroperasi dan dapat diuji kapan saja.

Kondisi: bekas, OTT Pacific V12 - Penyambungan Kontrol SPS-Komputer dengan Layar LCD Unit pra-pemotongan dengan kontrol celup Majalah rol otomatis penuh / Gunting potong Stasiun lem cepat Gkedpfew Nqg Esx Adqjc Unit pengepres otomatis Pemotong edging pneumatic 0-10° Edge milling/Chamfer milling 15/30/45° - 8 mm Milling radius R-2, R-5 Pembulatan sudut Pisau tarik radius Pisau tarik permukaan - akan diubah menjadi unit polishing Kabinet peredam suara dengan penyedotan ruang Mesin DIREKONDISI DI BENGKEL dalam KONDISI SANGAT BAIK Tersedia dari stok di Lieboch

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Edge banding machine F2 next Gkjdpfxji Am U De Adqec With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (for radius, bevel, or flush trimming)

Kondisi: bekas, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty design – edge thickness 0.4 - 5 mm PLC touchscreen control Large LCD display Pre-milling unit for edge preparation before gluing section Fully automatic edge magazine for rolls and strips Adhesive application unit for cartridge and PUR bonding Maximum edge height: 51 mm automatic glue height adjustment Pressure unit 1913, motorized and pneumatic End trimming unit for rolls and strips With pneumatic adjustment of 0-10° tilt for trimming saws Multi-function milling unit 1942 MOT 2 Milling unit with motorized positioning axes for machining different radii – chamfers – flush trimming via PLC Corner copying unit 1832 for corner rounding up to R 3 mm + postforming up to R 6 mm Gedpfx Aewtz T Sodqokc Scraper unit for chamfer and radius Pneumatic engagement/disengagement Finish surface scraper Regularly serviced by Holz Her Machine is FACTORY SERVICED and in TOP CONDITION Available from stock Lieboch

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Godpfx Aslht Hzedqskc

Kondisi: bekas, Hebrock K34 CNC control with 15" touchscreen display Pre-milling unit for application before the gluing section (3mm) Gkedpswtfvkefx Adqjc Glue pot with interchangeable tank and adhesive discharge device Maximum edge height: 60 mm End trimming unit Flush trimming unit (for straight, radius, and chamfer milling) Corner rounding unit (radii/chamfers) Multi-radius scraper (R1/R2) Nesting capability Flat scraper unit Release agent spraying device Year of manufacture: 2023, only 52 operating hours Machine is AS NEW, in TOP CONDITION From joinery closure / retirement Available directly from the joinery

Kondisi: baru, Tahun pembuatan: 2025, Hebrock F 4 Complete Processing of Your Panels For those who don’t want to do things by halves. With the F 4, we offer you a model that allows you to produce fully processed panel edges within a machine length of just 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. Edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm Godpfohqadcox Adqekc 10″ Touchscreen PLC control Top-mounted quick-heating glue pot (maintenance-free) Support plate for edge material Automatic centralized lubrication (cross-cut saw, corner rounding) Optical display for workpiece sequence Extension arm (extendable to front) Quick-change glue basin incl. glue change unit for PUR processing Surface scraper with dual sensor Pneumatic end trimming (scissor-type, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed-mount special chain plates Jointing cutter Milling unit Cross-cut saw Corner rounding unit Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi-radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Kondisi: bekas, OTT Tornado - TOP Control - via a 15-inch color touch monitor for full automation and optimum user convenience CM-CombiMelt gluing system suitable for processing EVA and PUR hot-melt adhesives as well as all standard cleaning granulates Edgebanding unit for joining chipboard panels Automatic roll magazine Automatic edge magazine Double end trimming unit with automatic swivel 0° / 3° Flush trimming unit for edge trimming - 12mm Gkodpowcymcofx Adqjc Fine radius trimming - profile cutters R2 - R5 Automated copy milling - corner rounding Scraper unit - radius Scraper unit - radius/chamfer Surface scraper unit Lubricant spray unit - PU Cleaning set with fine buffing device Very stable workpiece support with roller conveyors - FRONT with scissor extension Complete set of tools included Machine is AS NEW in EXTREMELY WELL-MAINTAINED CONDITION First commissioned in 2011, very low operating hours, approx. 1200 Machine comes from lease return / leasing possible Available ex stock Lieboch

Kondisi: baru, Tahun pembuatan: 2025, en-Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – - Immediately available - This long-running Hebrock bestseller offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a step milling cutter and a multi-radius scraper blade, Hebrock sets new standards in perfect edge processing for a wide range of edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8–60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1,750 kg Equipment: Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free coated glue pot with quick-change pre-equipment including glue drain device, HF double-motor trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic milling adjustment and interchangeable cutter (combined version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), buffing station, robust chain feed, ball-bearing-supported double roller upper pressure, aggregate inspection windows on machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge bonding up to 60 mm workpiece thickness Gedpfxsi Am Ukj Adqskc 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separating agent spray unit 36/24/2 Cleaning agent spray unit 36/25 Edge protection spraying unit 36/27 Nesting (1x milling station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness and jointing cutting depth settings Location: in stock at 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f5-en-2024 Gkodpji Anadjfx Adqoc

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, E450PM - MESIN EDGE BANDING OTOMATIS V000047 LME450PM-5 dengan unit pemotong join Mesin dalam kondisi sangat baik TEGANGAN 400/50/3 Godpfxexac Hwe Adqjkc KONTROL DENGAN LAYAR SENTUH 7" UNIT PEREKAT YANG DAPAT DITUKAR VR - UNIT POTONG MULTIFUNGSI Alat untuk pemotongan lurus/melengkung KIT ALAT R=2 mm SCRAPER PERMUKAAN UNIT PEMISAH PENERANGAN LED INTERIOR DOKUMENTASI DALAM BAHASA JERMAN LAMPU INFRARED untuk pemanasan panel UNIT SCRAPER Lokasi: dari stok 54634 Bitburg - Tersedia segera -