Beli Traub Tnc 65 bekas (93)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 19.295 h, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 32 mm, produsen pengendali: TRAUB, model controller: TX8i-s, jumlah sumbu: 9, Mesin 9-sumbu TRAUB TNL32-9 ini diproduksi pada tahun 2017. Mesin ini memiliki kecepatan putar spindle utama sebesar 8.000 rpm dan spindle tandingan sebesar 6.400 rpm. Mesin ini dilengkapi dengan dua sistem penggerak dan kapasitas maksimal lubang batang sebesar 32 mm, sehingga sangat cocok untuk berbagai aplikasi pembubutan. Jika Anda mencari solusi pembubutan berkualitas tinggi, pertimbangkan mesin bubut Swiss-type TRAUB TNL32-9 yang kami tawarkan ini. Silakan hubungi kami untuk informasi lebih lanjut. Gujdpfx Agozcyabsroc • Spindle utama: Spindle motor • Lubang spindle utama: 32 mm • Sumbu C spindle utama: Ya • Lubang spindle tandingan: 30 mm • Kecepatan spindle tandingan: 6.400 rpm • Dudukan alat bagian atas: Sumbu X-/Y-/Z-/H • Dudukan alat bagian bawah: Sumbu X-/Y-/Z-/H • Posisi alat dudukan atas: 10 • Posisi alat dudukan bawah: 10 • Sistem penggerak ganda: Ya • Mode pembubutan panjang (long-turning): Ya • Mode pembubutan pendek (short-turning): Ya • Mode pembubutan pergantian (W-T): Ya • Tekanan pendingin internal: 20 / 80 / 120 bar • Sistem pendingin: Bürener ECO Fluid • Kapasitas tangki pendingin: 600 l • Sistem ekstraksi kabut oli: Ya • Aliran udara: sekitar 1.500 m³/jam • Sistem pemadam api otomatis CO₂: Ya • Penjepit hidraulik benda kerja: Ya • Pelepas benda kerja spindle tandingan: Ya • Konveyor benda kerja: Ya • Sistem pemantauan alat: Ya • Antarmuka jaringan RJ45: Ya • Tegangan: 400 V • Frekuensi: 50 Hz • Daya nominal: 36 kW • Daya terpasang: 44 kVA • Arus nominal: 63 A • Perlindungan maksimum: 63 A • CE marking: Ya • Bar feeder: FMB LSK38 / 3200 C • Kisaran diameter batang: 5 – 38 mm • Panjang batang maksimum: 3.200 mm • Pembuangan sisa panjang batang: hingga 600 mm • Arah pemuatan: Kanan • Posisi penempatan material: Depan • Konveyor serbuk logam: Opsional, tidak termasuk Spesifikasi Teknis Pendinginan melalui spindle: Ya Spindle tandingan: Ya Alat potong bertenaga: Ya

Kondisi: siap digunakan (bekas), Traub 700 734 VEMEM/I interface board, bekas, kondisi terawat dengan baik, 100% berfungsi, lingkup pengiriman sesuai foto Gjdpfx Asx Eu Tvegreuc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 124.706 h, kecepatan spindel (maks.): 6.300 rpm, jarak pergerakan sumbu X: 370 mm, jarak gerak sumbu Z: 250 mm, daya motor spindle: 10.700 W, produsen pengendali: TRAUB, model controller: TX8i (64-bit), jumlah sumbu: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced features such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking for a high-quality lathe, you should consider the TRAUB TNK 36 horizontal lathe that we are offering for sale. Contact us for further details. TECHNICAL DETAILS • MDE interface: Yes • Tool monitoring: Yes • Rigid tapping: Yes (without compensation chuck) • Main spindle bore: 36 mm • Main spindle drive power: AC 6.7 / 10.7 kW • Upper turret stroke X/Z: 50 / 100 mm • Rear attachment stroke X: 73 mm • Rear attachment stroke Y: ±50 mm • Main spindle C axis: Yes • Hainbuch quick change components: Yes • Hainbuch set-up aid base body: Yes • Hainbuch manual quick-change device: Yes • Counter spindle: Motor spindle • Counter spindle C axis: Yes • Bar loader pressure management device: Yes • Workpiece ejector: Yes • Hainbuch Axfix chuck: Yes • Upper tool carrier: Yes • Electronic gearbox: Yes • X3 transverse axis for front attachment: Yes • Front unit: 5-position • Driven tools at front unit: Yes • Cut-off side machining station: Yes • Driven tools at cut-off station: Yes • Workpiece unloading device: Gripper • Coolant tank capacity: 230 l • Coolant pressure: 7 bar • Coolant flow rate: 50 l/min • Internal coolant supply: 30 bar • High-pressure coolant: 120 bar (front and rear machining station) • Coolant filter: Knoll VRF 150/750 vacuum rotary filter • Suitable filter materials: Aluminium, plastics, brass, steel • Washdown gun: Yes • Connected power: 22 kW • Maximum bar length: 3 m • Maximum bar diameter: 36 mm • Operating voltage: 400 V, 3~, 50 Hz • Control voltage: 24 V AC • Valve voltage: 24 V DC • Clutch voltage: 24 V DC • Total installed power: 33 kW • Rated total current: 60 A OPTIONAL EXTRA EQUIPMENT • FMB turbo 5-42 XT / 3200 "C" bar feeder • Bar loader year: 2003 • Hinged belt chip conveyor • Chip conveyor discharge height: 950 mm • Guide tubes D25, D36 • Live part stop, shaft 16 × 16 mm • Brankamp CMS 100 collision monitoring Technical Specification Gujdpfxeza Ucxj Agrsc Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 1.749.535 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6060449, panjang pembubutan: 305 mm, kecepatan spindel (maks.): 8.000 rpm, diameter pembubutan: 32 mm, lubang spindel: 32 mm, berat keseluruhan: 8.000 kg, kecepatan rotasi (maks.): 8.000 rpm, jenis arus masuk: tiga fasa, saluran batang: 32 mm, panjang total: 3.671 mm, tinggi total: 2.650 mm, kecepatan pemakanan sumbu X: 5 m/menit, laju pemakanan gandar Y: 5 m/menit, laju pemakanan sumbu Z: 5 m/menit, Diameter batang (maks.): 32 mm, lubang collet: 32 mm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 20 m/menit, tegangan masuk: 400 V, daya: 36 kW (48,95 hp), jarak pergerakan sumbu X: 140 mm, jarak lintasan sumbu Y: 40 mm, jarak gerak sumbu Z: 305 mm, diameter penjepit: 32 mm, produsen pengendali: Traub System TX 8i - s V7, Perlengkapan: dokumentasi / manual, Mesin dalam keadaan teraliri listrik dan saat ini berproduksi setiap hari. Semua informasi ada pada lampiran. Mesin tersedia dalam waktu singkat. Konfirmasi pesanan dengan seluruh informasi mengenai mesin dan majalah pengumpan terdapat di lampiran. Harga baru: €444.857,70 bruto. Mesin ini sebelumnya merupakan mesin demonstrasi dari tahun 2016 hingga 2020. Harap perhatikan jumlah jam kerja. Mesin dijual termasuk majalah pengumpan FMB LSK38. FMB LSK38 / 3200 "C" Guodpszc Hmusfx Agroc

Kondisi: bekas, CNC lathe TRAUB Type TND 400 Serial No. 708 Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swing diameter over bed max. 470 mm Spindle bore in draw tube: 65 mm Spindle drive motor power: 22 kW Total power requirement: 35 kW Power supply: 380 Volt, 50 Hz - Electronic handwheel - RS 232 data interface - Disc turret with 12 tool stations VDI 40 - incl. 8 tool holders VDI 40 - 3-jaw power chuck Ø 225 mm SMW Autoblok, Type KNCS-N- Ø 225-65 plus a large assortment of chuck jaws - Hydraulic hollow clamping cylinder SMW, Type ZHDAS-130-67 - Chip conveyor KNOLL, Type 200 S-1/600 - Coolant system Gujdjzacwdspfx Agrec - Adjacent hydraulic power unit (L x W x H 650 x 500 x 1000 mm) Required floor space L x W x H: 4800 x 2000 x 2100 mm Main machine footprint L x W x H: 3500 x 2000 x 2100 mm Chip conveyor footprint L x W x H: 4500 x 700 x 1550 mm Weight approx. 5 tons Good condition Machine is ready for demonstration. The hollow clamping cylinder for workpiece clamping needs to be repaired.

Kondisi: baik (bekas), No. Artikel internal: 25088 Gujdpfoxu Dcvex Agrjc Pemegang alat Pemegang swirling ulir termasuk insert pemotong Index / Traub No.: 12068219 Alat ini digunakan pada mesin Traub TNL18 Kondisi sangat terawat!

Kondisi: baik (bekas), No. Artikel internal: 25089 Pemegang alat Pemegang ulir spiral Index / Traub No.: W7045012B Kondisi sangat terawat! Pemegang ini digunakan pada mesin Traub TNL18. Godsxu Uu Aepfx Agrsuc

Kondisi: bekas, Tahun pembuatan: 1990, translation_001 Gsdpfjw I R Ndex Agrsuc

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut CNC Traub TND360, TX8, tahun 1982, No. mesin >600 Gjdezcdnvjpfx Agrsuc 1 revolver, kepala lepas, konveyor serbuk, silinder penjepit berlubang, chuck 3 rahang KNCS250. Gambar diambil saat mesin dalam produksi. Mesin dapat diperiksa dalam kondisi menyala.

Kondisi: baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, Traub CNC Bubut TNA480, TX8D, th. 1990, No. Mesin >550 Gusdpfx Agszcdgfsrsc Sumbu C, penggerak alat putar, 1 revolver VDI40, kepala lepas, konveyor serpihan, silinder penjepit berongga, chuck 3 rahang KNCS315. Kondisi baik, siap pakai Geometri mesin sudah diperiksa dan dikoreksi/disetel Pengikis + sabuk diperiksa, diganti, servis 4000 jam. Foto diambil saat mesin beroperasi, mesin akan dibersihkan dan diperiksa lagi. Mesin dapat dilihat dalam kondisi hidup.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 x mesin bubut otomatis Traub A 25 Perlengkapan: Tailstock bor Perangkat pembubutan panjang Pengumpan berat Mesin lengkap dan bagus dalam kondisi teknis sangat baik. Guodpfx Aszcdp Hsgrjc Mesin dapat dilihat dalam keadaan menyala.

Kondisi: bekas, Tahun pembuatan: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm CNC control: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3,150 rpm / 2-stage Rapid traverse: 10,000 mm/min Tool turret - number of stations: 8 Operating hours / on-time hours: 8,834 h Tailstock taper: SK30 DIN 2080 Tailstock quill stroke: 105 mm Operating pressure: 40 bar Godpfxou Rqabe Agreuc Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions approx. (LxWxH): 1.8 x 3.3 x 1.8 m Hydraulic unit dimensions: 580 x 400 x 750 mm Equipment: 200 mm diameter hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Fine adjustment device for tool setup

Kondisi: bekas, Tahun pembuatan: 1993, Detail Teknis: Gerak x: 400 mm Gerak y: 300 mm Gerak z: 400 mm Kecepatan spindle: 8000 rpm Kontrol: Fanuc OM Meja penjepit: 500x300 mm Jumlah tempat magazin: 16 buah Guedpsu Idn Hefx Agrjc Taper alat: SK40 Jarak spindle kerja/permukaan penjepit maks.: 50-450 mm Jumlah palet: 2 buah/part Kebutuhan daya total: 10 kW Berat mesin sekitar: 2,5 t Dimensi mesin (PxLxT): 2,4x1,8x2,5 m Ukuran transportasi mesin: 2,45x1,8x2,5 m - Lemari listrik - Sistem pendingin - Konveyor serpihan merk META (Tinggi angkut 1500mm; Lebar 200mm) Fungsi pergantian meja tidak beroperasi.

Kondisi: bekas, Tahun pembuatan: 1987, en-GB: Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Max. workpiece diameter: 450 mm Cross travel (Z-axis): 168 mm Control: Traub TX8D Guodpfx Aou Ix N Ssgrec Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours (power-on): 23,495 h Tool turret: 12 stations Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. LxWxH: 3.6 x 2.5 x 2.2 m Tool holder: cylindrical shaft DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200 mm, hydraulic clamping Operation via double foot switch and control panel/operator desk Coolant system The TRAUB features an integrated chip conveyor with an ejection height of 1,100 mm (currently not functional). Accessories: various small parts 8 machine feet (various) without tailstock as is.

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 18 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.0 / 5.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Travel Z: 205 [mm] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 1.5 / 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of positions: 8 - Number of driven positions: 8 - Driven tool speed: 12,000 [rpm] - Driven tool power: 1 / 2 [kW] - Travel X/Z: 165 / 550 [mm] - Travel Y: -40 / +25 [mm] - Rapid traverse speed (X/Y/Z): 21 / 21 / 42 [m/min] - B-axis travel: 100 [degrees] LOWER TURRET - Number of positions: 7 - Number of driven positions: 7 - Driven tool speed: 12,000 [rpm] - Driven tool power: 1.5 / 2.5 [kW] - Travel X/Z: 120 / 250 [mm] - Travel Y: -20 / +40 [mm] - Rapid traverse speed (X/Y/Z): 21 / 21 / 50 [m/min] COUNTER OPERATIONS - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 10,000 [rpm] - Driven tool power: 1 / 2 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 24 [kVA] WEIGHT AND DIMENSIONS - Footprint: 3,060 x 1,480 [mm] - Machine height: 2,420 [mm] - Machine weight: 4,300 [kg] MACHINE HOURS - Operating hours: 14,998 [h] - Spindle hours: 11,177 [h] Gujdpfx Agjzbvnlerec ACCESSORIES - Control: Traub TX 8i-s - Driven guide bushing - Parts removal - Parts conveyor belt - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar loader: IEMCA ELITE 220 / 32 XL - Oil mist extraction: ELBARON RON/A 1500 DH - Fire extinguishing system * * NB: Functionality not guaranteed. To be checked by a qualified company commissioned by the buyer.

Kondisi: baik (bekas), Tahun pembuatan: 2003, en Gusdpszaud Aofx Agrjc

Tahun pembuatan: 1993, Kondisi: bekas, nomor mesin/kendaraan: 156, Kontrol CNC Traub Sistem TX8 F, dengan 1 revolver dengan 6 posisi alat dan 1 revolver lagi dengan 6 posisi alat, alat bertenaga, kapasitas batang 30 mm, dilengkapi dengan unit penyaring kain non-woven, sistem pendingin, dan majalah pemuatan batang otomatis. Guedpey Sqkwsfx Agroc

Kondisi: bekas, Tahun pembuatan: 1992, nomor mesin/kendaraan: 690, Sistem kontrol CNC Traub TX8 D, dengan 1 revolver dengan 14 posisi alat dan 1 revolver dengan 9 posisi alat, alat bertenaga, panjang putar maks. sekitar 1000 mm, diameter lewat batang 80 mm, daya 73 KW, dengan sistem filter nonwoven dan konveyor serpihan. Gusdpjy Sqimjfx Agrjc

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300 rpm, drive power: AC 6.7/10.7 kW, C-axis, Hainbuch interchangeable parts, base body installation aid, Hainbuch manual quick-change device, counter spindle: counter spindle as motor spindle, C-axis, setup for counter spindle pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool turret, driven tools, electronic gearbox, X3 cross-axis for front unit, 5-position front tool holder and parting/offside machining station with driven tools. Machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36. Coolant system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining stations, Knoll VRF 150/750 vacuum rotary filter (suitable for aluminum, plastic, brass, and steel), rinse gun. Connected load: 33kW, control: TX8i (64bit), 10.4 inch flat screen monitor, additional part counter, V24 RS232 and MDE interface in the control cabinet. Operating hours: 124,705h, with FMB TURBO 5-42XT/3200/C bar feeder, chip conveyor, coolant unit and basic set of static and driven tool holders. On-site inspection is possible. Gjdpfxjy U Nq Is Agrsuc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 116.688 h, kecepatan spindel (maks.): 5.600 rpm, jarak pergerakan sumbu X: 375 mm, jarak gerak sumbu Z: 450 mm, daya motor spindle: 11.000 W, tinggi total: 1.800 mm, berat keseluruhan: 3.500 kg, produsen pengendali: TRAUB, model controller: TX8H, panjang produk (maks.): 2.700 mm, jumlah sumbu: 3, This 3-axis horizontal lathe TRAUB TNA 300 was manufactured in the year 2000. It features a spindle bore of 65 mm and is equipped with a high-pressure coolant system, driven tools with 4 kW power output, and an automatic bar change system. The machine includes a chip conveyor and tool monitoring systems to increase operational efficiency. If you are looking for a high-quality lathe, you should consider the TRAUB TNA 300 we have available for sale. Please contact us for further details. • Spindle bore/machine capacity: 65 mm • Capacity of the installed 185E collet system: max. 60 mm clamping diameter • Machine configuration: without tailstock • Basic equipment: included • Hydraulic hollow clamping cylinder: included • High-pressure coolant system: 12 bar / 3 bar • Control: TX8H, 32-bit technology; processor of the latest generation (at the time of manufacture); parameter data on disk • Axes/functions: • C-axis: included (NC spindle orientation and rotational axis) • Y-axis: not included • Driven tools: included; power output 4 kW • Monitoring and safety: • Tool breakage monitoring: included • Tool wear monitoring: included • Automatic drive shutdown at material end: selectable via parameter • Error message via parameter: selectable • Guideway cover: included • Workpiece clamping: • Collet system: ROHM • Collet system compatibility: • DIN 6343 Size 48, max. diameter 42 mm • Rubberflex Series 52 compatible • Rubberflex Series 36 compatible • Fahrion collet FM 1149 MB compatible • Fahrion collet FM 1148 MB compatible • Electrical: • Electrical system per: VDE / EN 60204 • Operating voltage: 400 V / 50 Hz • Accessory voltage: 230 V / 50 Hz • Control voltage: 24 V DC • Multi-voltage transformer: 460 / 400 / 380 / 220 / 200 V • EMC: • Compliance: Industrial class A • Standards: EN 50081 / EN 50082 / EN 55011 / EN 55022 • Machine standards: DIN EN 292; DIN EN 294; DIN EN 418; DIN EN 60204-1 • Pneumatic system: Mannesmann Rexroth ISO Additional Equipment • Chip conveyor: included • Workpiece extraction device: included; via conveyor, left side ejection • Loader preparation: included • Bar feeder magazine: TRAUB DNH 61-3000 (automatic) • Feed: telescopic pusher system • Bar shapes: Round / Hexagonal / Square • Maximum bar length: 3200 mm • Maximum bar diameter (long bars): 63 mm • Maximum bar diameter (short pieces): 65 mm • Automatic bar change: included • Remnant removal: forward • Central bar diameter adjustment: included • Steplessly adjustable feed force: included • Central magazine adjustment: included • No guide channel change required • No collet change required • Short remnants possible • Cross loading system • Transport weight: approx. 2100 kg Technical Specification Counter Spindle: No Guodpjy Sg Dgefx Agroc Driven Tools: Yes

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut otomatis dengan kontrol kurva termasuk majalah pengisi - Produsen PMT (Traub India) - diameter batang maks. 25 mm - senter ekor - 2 dudukan alat vertikal Guedpfx Agjy R Tqqsrsc - 2 dudukan alat horizontal - berat sekitar 650 kg - Dimensi (PxLxT) sekitar 1000 x 600 x 1500 mm - Pengisi batang IEMCA AS 325/62 (panjang batang maks. 6.200 mm)

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut otomatis dengan kontrol kurva termasuk majalah pengisi Guedpfx Agjy R Tm Ssrec - Produsen PMT (Traub India) - diameter batang maks. 25 mm - senter ekor - 2 dudukan alat vertikal - 2 dudukan alat horizontal - berat sekitar 650 kg - Dimensi (PxLxT) sekitar 1000 x 600 x 1500 mm - Pengisi batang IEMCA AS 325/62 (panjang batang maks. 6.200 mm)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, mesin bubut otomatis pengendali kurva termasuk majalah pemuatan - diameter batang maksimum 25 mm - tailstock - 2 dudukan alat vertikal - 2 dudukan alat horizontal - berat sekitar 650 kg - dimensi (PxLxT) sekitar 1000 x 600 x 1500 mm Gjdpfxoy R Tg Sj Agreuc - pemuat batang IEMCA AS 325/62 (panjang batang maks. 6.200 mm)

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Swiss-Type Lathe Manufacturer: Traub Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Quality of bar material (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Travel X1 (mm): 35 - Travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Travel X2 (mm): 35 - Travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Driven Tool for Tool Carrier 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (quantity): 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Subspindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (quantity): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Rear Tool Device, Dragged / Stationary - Z-stroke dragged with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool stations (quantity): 3 Rear Tool Device (X4 Axis) - X4 stroke (mm): 39 - Rapid traverse (m/min): 15 - Tool holder diameter (mm): 28 - Tool stations (quantity): 4 Driven Tool Unit for Rear Device (with X4 Axis) - Max. speed (rpm): 10,000 - Driven tool stations (quantity): 4 - Clamping diameter for drilling tools - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant System - Pump pressure, single stage (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 Guedpfxjy N A S Us Agrjc FEATURES - Chip conveyor - Bar feeder FMB Minimag 18 - High-pressure coolant system - Fire extinguishing system Subject to technical changes and errors.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, CNC Swiss-Type Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Quality of round material (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - with fixed guide bushing (mm): 130 - with rotating guide bushing (mm): 80 Gjdpfx Agsy N A Aterouc - with programmable guide bushing (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - X1-axis travel (mm): 35 - Y1-axis travel (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - X2-axis travel (mm): 35 - Z2-axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Driven Tool for Tool Carrier 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (qty): 2xG - Clamping diameter for boring tools (mm): 0.5–7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool positions (qty): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Backworking Attachment, Synchronized / Fixed - Z-axis stroke, synchronized with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool positions (qty): 3 Backworking Attachment (X4-Axis) - X4-axis stroke (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool positions (qty): 4 Driven Tool for Backworking Attachment (with X4-Axis) - Max. speed (rpm): 10,000 - Max. driven tools (qty): 4 - Clamping diameter for boring tools - driven (mm): 0.5–7 - non-driven (mm): 0.5–10 Coolant System - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure system - Fire extinguishing system Subject to changes and errors in technical specifications and details.