Beli Traub Tnc 65 bekas (92)

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), A CNC twin-spindle lathe Traub, completely overhauled in 2025, is available. Turning length: 450mm, spindle bore: 65mm, max. speed: 4000rpm, main spindle/sub-spindle power: 18.5kW/11kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed travel: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed travel: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed travel: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12,938h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation available. An on-site inspection is possible. Ncjdpfx Aov Scrboglsl

Kondisi: baik (bekas), Tahun pembuatan: 1996, CNC turning center TRAUB Type: TNC65 DG, Year of manufacture: 1996, Control: TRAUB TX8F Nodpfx Agju Eug Ieljcl Comes with extensive accessories.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Ncsdpfx Ajwi I Eyoglol Y-axis on S1, V-axis, 2x C-axis, 2x rotary tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and sub spindle, parts catcher, bar feeder Iemca Master 880MP-E. Condition Very well maintained, good condition, serviced. The machine geometry has been checked and adjusted/set. Machine can be inspected under power – or video available. Warranty: 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinder. The warranty expressly only covers spare parts, not downtime or labor hours, travel time. Warranty does not apply to parts other than those listed above, e.g., wear parts, electrical, electronics, hydraulics, etc.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8H, year 2001 • 2x 10-position turrets with driven tool holders, VDI30 • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 clamping system on main and sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts manual, circuit diagram, ATC optics Ncedpfxjwi Izho Aglsl Very good condition. Can be inspected under power. The machine geometry has been checked and adjusted/set.

Kondisi: baik (bekas), Tahun pembuatan: 1994, TRAUB TNS 65 D / Pusat Bubut-Milling CNC 5-sumbu Ncjdpfx Aeyc Nnzjgljl -Kontrol: TX8 D -Data teknis lengkap lihat foto -Tahun pembuatan 1994 -Magasin pemuatan Hydrobar -Beragam dudukan alat berpenggerak -Dudukan alat -Cekam tiga rahang -Dokumentasi lengkap Kesalahan dan kekeliruan entri dapat terjadi

Kondisi: baru, 3 safety windows suitable for CNC lathes TRAUB TNA 300 TNA 400 TNA 500 TNC 42 TNC 65 Dimensions: 660 x 480 mm Price: €500.00 / each net Delivery time: immediate, subject to prior sale Siegfried Volz Werkzeugmaschinen Nodpfx Aew Edq Deglocl Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: bekas, Tahun pembuatan: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Nedpfx Ajwp D Nboglocl Drive power: 25% duty cycle 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar loader TRAUB Stamag DNH61 / 3000, Main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various non-driven tool holders 6 pcs. various driven tool holders Spare parts package

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Deskripsi menyusul Nsdpfox A Hdfox Aglscl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, jam operasional: 15.001 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 462, model controller: Traub TX8F, jumlah sumbu: 7, Perlengkapan: konveyor serpihan, pengumpan batang, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Ncjdpfxew Uiqye Agljl Control: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h EQUIPMENT Main spindle Counter spindle 2 tool turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Chip conveyor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 364, model controller: Traub TX8F, jumlah sumbu: 7, Perlengkapan: konveyor serpihan, pengumpan batang, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h Nodjw Ec Aljpfx Aglocl EQUIPMENT Main spindle Counter spindle 2 tool turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Chip conveyor

Kondisi: bekas, Tahun pembuatan: 1990, Turning diameter 250 mm Turning length 450 mm Control system TX8D Njdpfot Hwq Dox Aglocl Spindle bore 80 mm Spindle speed: 3,150 rpm CNC bar turning machine with 3 turrets Extra-large spindle bore, equipped with bar loader

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm Nedpfx Agouhadzoljcl - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg OPERATING HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2 HAINBUCH

Kondisi: baik (bekas), Tahun pembuatan: 2007, Traub TNX 65/42 Fräs- und Drehzentrum Baujahr 2007 Seriennummer: 7060107 Inbetriebnahme: 2010 TX 8i-S Steuerung (Mitsubishi/Traub-basierte Steuerung mit Mitsubishi-Antrieben und -Motoren) 15 CNC-Achsen Vier (4) X-Y-Z Revolver mit jeweils 10 Positionen (bis zu 20 Werkzeuge je Revolver möglich) 65 mm Spindeldurchlass an Haupt- und Gegenspindel (Gegenspindel mit Kühlmittelspülung) Fußpedalsteuerung zum Spannen/Lösen der Spannfutter Servogesteuerte Portaleinheit Hydraulisch schwenkbar mit pneumatischem Fertigteil- und Reststückgreifer Fertigteilförderband RESY Papierband-Kühlschmierstofffilter Knoll-Kühlmitteltank mit BKW Kältemittel-Temperaturregelung 20 bar Hochdruck- und 8 bar Niederdruck-Kühlmittelpumpen Knoll Späneförderer Ncjdpoq Npqmsfx Agljl FMB Turbo 5-55 Stangenlademagazin (neu 2010) 2 Einzelstangen-Drehhalter 2 Doppelstangen-Drehhalter 1 Abstechhalter 1 angetriebener doppelter radialer ER Spannzangenhalter 1 angetriebener radialer ER Spannzangenhalter 4 radiale angetriebene ER Spannzangenhalter 1 radialer angetriebener Fräserhalter 1 winkelverstellbarer angetriebener ER Spannzangenhalter 2 radiale angetriebene Messerkopfhalter 2 axiale angetriebene Fräserhalter 6 axiale angetriebene ER Spannzangenhalter 43 zusätzliche Werkzeughalter auf separater Liste (siehe Anhang) Hainbuch Hauptspindel-Spannzangenfutter Röhm 2-Backen-Futter an der Gegenspindel 2 Ersatzsätze Kugelumlaufspindeln und Lagerpakete für die Z-Achse.

Kondisi: baik (bekas), Tahun pembuatan: 1999, jam operasional: 110.000 h, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 42 mm, Deskripsi menyusul Nsdpfx Aox A Ha Hegljcl

Kondisi: bekas, Tahun pembuatan: 2005, Turning diameter 275 mm Turning length 900 mm Control system: TRAUB TX8i Spindle bore 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds – stepless: 1 – 5,000 rpm Spindle diameter (front bearing): 110 mm C-axis: 1 – 500 rpm Ncedew E Nnbopfx Aglsl Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret – number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 – 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar feeder DNH61 / 3000 Bar lengths: 1,000 – 3,200 mm Bar diameter: 18 – 63 mm Max. hexagon across flats: 45 mm Total power requirement: 95.00 kW Machine weight approx. 16.00 t Space required approx. 10.00 x 3.50 x H3.00 m Equipped with control system TRAUB TX 8i, main and counter spindle with C-axis, 3 pcs. turret tool holders, 1 pc. vertical tool holder with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various tool holders, non-driven 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 37.000 h, Fungsionalitas: berfungsi sepenuhnya, TRAUB TNX65 with bar loader and accessories Year of manufacture: 2006 Operating hours: 37,000 h Control: TX8i - Both tool turrets have been refitted with new seals - High-pressure pump replaced - Machine fully operational - Geometry within manufacturer’s tolerance Accessories: - 2x Hainbuch chucks - Various tool holders (see photos) - Breuer bar loader (1,200 mm) - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 Njdpfxewm Igfe Aglecl - X/Z travel path: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel path: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg

Kondisi: sangat baik (bekas), Manufacturer: GRÜN SYSTEMTECHNIK WETZLAR including case We offer an original ATC measuring microscope, which was originally taken from a TRAUB TNA turning center. The device is designed for integration into the automatic tool changer and can be used on various CNC machines with a suitable tool holder interface (size comparable to TRAUB TNA400). Nsdpfx Agjycuhtslscl Key Features and Benefits: • Universal Application: Suitable for any CNC machine with a compatible tool holder interface. • Fast Tool Setup: Enables direct measurement of cutting edges, tool lengths, and radii within the machine. • Process Reliability: Tool wear can be detected and corrected immediately without removing the tool. • Precise Referencing: Useful for checking reference points, bores, and fixtures directly during setup. • Time Savings: Eliminates the need for external presetting devices and reduces downtime. • Compact and Robust Design: Simple integration and operation within the tool change system. This ATC measuring microscope transforms your CNC machine into a precise measurement station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Kondisi: bekas, Tahun pembuatan: 1990, Banyak dudukan Chuck pengunci daya Revolver 12 posisi Jenis mesin: CNC - Mesin Bubut Tahun pembuatan: 1990 Kontrol: Traub TX 8 F Diameter putar: 480 mm Panjang putar: 800 mm Lubang spindle: 65 mm Kecepatan spindle: 40 - 4000 rpm Berat: sekitar 5000 kg Nedpfjyc Hgbsx Aglscl Dimensi P x L x T: sekitar 2950 x 1990 x 2000 mm Kondisi: bekas

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 24.993 h, Fungsionalitas: berfungsi sepenuhnya, I am offering the following machines for sale: TRUMARK 3010 (TMS 1000) – Laser Marking System – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Ultrasonic Cleaning System – 2015 Mollart Drillsprint – Deep Hole Drilling Machine – 1996 Traub TNL 26 – CNC Sliding Headstock Lathe – 2004 Traub TNL 26 – CNC Sliding Headstock Lathe – 2007 Traub TNL 26 – CNC Sliding Headstock Lathe – 2009 Traub TNL 18 – CNC Sliding Headstock Lathe – 2013 Traub TNL 18 – CNC Sliding Headstock Lathe – 2014 Star SV-20R – CNC Sliding Headstock Lathe – 2019 Traub TNL18-9P – CNC Sliding Headstock Lathe – 2015 Traub TNL18 – CNC Sliding Headstock Lathe – 2014 Traub TNL18-9 – CNC Sliding Headstock Lathe – 2013 OTEK CF 1x18 T – Vibratory Finishing System – 2011 Rösler FKS 04.1 E Sa-So – Vibratory Finishing System – 2020 Schleifbock DP07 – Grinding & Polishing Machine (for implants) – 1986 Rösler RWT 1000-I – Indexing Table Blasting Machine – 2012 Biegemaschine C 202 M – Bending Machine – 1990 Schmidt Hydro-pneumatic Press – 2021 TRAUB TNL 26 – CNC Swiss-Type Automatic Lathe General information Model: TNL 26 Year of manufacture: 2007 Control: TRAUB TX8i Condition: used, in production Operating hours (powered on): 33,905 h Kinematics & Structure Number of axes: 13 Number of spindles: 2 Number of turrets: 2 Front tool station: yes Subsequent machining: yes Main spindle Max. bar diameter: 26 mm Max. machining length: 225 mm Z travel: 250 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Sub spindle Max. bar diameter: 26 mm Z travel: 250 mm X travel: 370 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Tool systems Upper turret Stations: 12 Powered stations: 12 Travel: X: 50 mm Z: 100 mm Y: ±20 mm Nsdpfx Asycl Uweglecl Driven tools: Speed: 6,000 rpm Power: 4.3 kW Lower turret Stations: 12 Powered stations: yes Travel: X/Z: 50 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Front tool station Stations: 5 Powered stations: 4 X/Z travel: 370 / 250 mm Driven tools: up to 6,000 rpm Counter-operation Stations: 5 Powered stations: 4 Travel: X: 73 mm Y: ±50 mm Driven tools: up to 6,000 rpm Cooling & peripherals Coolant tank: available High-pressure coolant system: 70 bar Chip conveyor: available Parts conveyor: available Parts removal & parts ejector: available Driven guide bushing: yes Bar feeder: available Electrical data Supply voltage: 400 V Total drive power: 33 kW Dimensions & Weight Floor space: 3,706 × 1,292 mm Machine height: 1,630 mm Machine weight: approx. 4,000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 6.000 h, Fungsionalitas: berfungsi sepenuhnya, TRAUB TNL 18 – CNC Swiss-Type Automatic Lathe Ex Works High Med-Tech, Reject Rate 0.3% Machine Type: TNL 18 Machine Number: 6050338 Year of Manufacture: 2013 Condition: Used, very well maintained, in productive operation Included: High-pressure coolant system + bar feeder Spindles & Machining Main spindle: Motor spindle Max. bar capacity main spindle: 18 mm (optional 20 mm) Max. speed main spindle: 12,000 rpm Max. torque: up to 10.5 Nm C-axis resolution: 0.001° Counter-spindle: yes Max. bar capacity counter-spindle: 18 mm Max. speed counter-spindle: 12,000 rpm C-axis counter-spindle: yes Tool System Upper turret: 8 stations Axes: X / Y / Z / B / H Lower turret: 7 stations Axes: X / Y / Z / H Back-working attachment: 7 stations Max. tools in-cut simultaneously: 3 tools Tool capacity: Standard: 22 Max. (with tool holders): up to 52 tools Axes & Dynamics Number of CNC linear axes: 7 Rapid traverse: up to 40 m/min (Z) Long axis travel for both sliding and fixed headstock operation Simultaneous machining with main & counter spindle: yes Coolant & High Pressure Coolant tank: approx. 500 l Standard pressure: 3 / 8 bar High pressure (option, included): up to 20 bar Delivery rate: approx. 28 l/min Filtration: 50 µm Electrical Data Rated voltage: 400 V / 3~ / N / PE Rated current: 56 A Max. upstream fuse: 63 A Rated power: 35 kW Connected load: 24 kVA Frequency: 50 Hz Control voltage: 24 V DC Dimensions & Weight Machine dimensions (L × W × H): approx. 3060 × 1480 × 2420 mm Weight: approx. 4,300 kg Summary (Advert Short Text) TRAUB TNL 18, Year 2013 CNC Swiss-type & short turning lathe Main and counter spindle 2 turrets + backworking attachment Ncjdpoycl Udofx Aglel High-pressure coolant system included Bar feeder included Very robust production machine Reject rate only 0.4% Ideal for precision and series production I am selling the following machines: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Cleaning / Ultrasonic cleaning – 2015 Mollart Drillsprint – Gun drilling machine – 1996 Traub TNL 26 – Swiss-type lathe – 2004 Traub TNL 26 – Swiss-type lathe – 2007 Traub TNL 26 – Swiss-type lathe – 2009 Traub TNL 18 – Swiss-type lathe – 2013 Traub TNL 18 – Swiss-type lathe – 2014 Star SV-20R – Swiss-type lathe – 2019 Traub TNL18-9P – Swiss-type lathe – 2015 Traub TNL18 – Swiss-type lathe – 2014 Traub TNL18-9 – Swiss-type lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Schleifbock DP07 – Grinding & polishing (implants) – 1986 Turntable blasting system Rösler RWT 1000-I – Blasting / blast cabinet – 2012 Bending machine C 202 M – Bending machine – 1990 Schmidt Hydro-Pneumatic Press – Press / Hydro-pneumatic press – 2021

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 246, panjang pembubutan: 900 mm, jarak pergerakan sumbu X: 280 mm, jarak gerak sumbu Z: 400 mm, tinggi total: 2.700 mm, panjang total: 5.000 mm, lebar total: 2.000 mm, berat keseluruhan: 7.000 kg, produsen pengendali: TRAUB, model controller: SYSTEM TX 8H, jumlah slot dalam magazin alat: 12, TRAUB TNA 400 Mesin Bubut CNC - Tegangan operasi: 400 V - Frekuensi: 50 Hz - Daya terpasang: 36 kW - Arus nominal: 70 A - termasuk satu tailstock serta chuck HAINBUCH, juga dilengkapi conveyor serpihan, TOOL EYE, dan satu chuck tambahan merek FORKHARDT, diameter: 250 mm Perhatian: Item harus diambil secara wajib antara tanggal 18 dan 26.02.2026 pada tanggal yang akan disepakati. Njdpfex Tzx Ijx Agljcl FCA D-78087 Mönchweiler - dimuat ke atas truk

Kondisi: baik (bekas), Tahun pembuatan: 2013, jam operasional: 43.000 h, Fungsionalitas: berfungsi sepenuhnya, description-machine-good-condition-barfeeder-included-accessorie s-technical-specs Ncodsyayz Tjpfx Agljl

Kondisi: bekas, Tahun pembuatan: 2000, drehdurchmesser-275-mm-drehlange-450-mm-system-tx-8h Nedpfx Asx Sr Hajglscl

Tahun pembuatan: 2001, Kondisi: baik (bekas), Rod diameter min. 18mm / max. 63mm Bar length min. 1000mm / max. 4200mm Ncsdpfxsi Dagce Aglel

Kondisi: bekas, Grinding wheel dresser, cup wheel dresser, bench grinder dresser, surface grinding machine dresser, cylindrical grinding machine dresser, dressing head, truing head for grinding machines - Quantity: 1x wheel dresser available - Price: per piece - Dimensions: 325/130/H135 mm Neded R Ikdepfx Aglocl - Weight: 7.3 kg