Beli Traub Tnd 360 bekas (94)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 3.500 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 10.000 rpm, diameter pembubutan: 20 mm, berat keseluruhan: 5.000 kg, panjang umpan sumbu Z: 205 mm, pergerakan cepat sumbu Z: 20 m/menit, daya: 3 kW (4,08 hp), Perlengkapan: dokumentasi / manual, konveyor serpihan, Cairan pendingin: Oli pemotong Pemasok batang: FMB Turbo 2-20 Konveyor sabuk engsel oleh KABELSCHLEPP Instalasi tekanan tinggi 20-80 bar oleh BÜRENER Gusdpfexa Elvjx Adqeh Sistem pemadam kebakaran oleh KRAFT & BAUER Separator kabut oli oleh BÜCHEL

Kondisi: baik (bekas), Tahun pembuatan: 2004, Control: TRAUB SYSTEM TX8H Weight: 3,500 kg Dimensions (L x W x H): 3,960 x 1,640 x 1,800 mm Power: 11 kW Spindle speeds: 5,600 / 4,000 rpm Torque: 200 / 280 Nm The TRAUB TNA 300 lathe was designed for the following machining of workpieces with a turning length of 450 mm: - For cutting metal and plastics with defined cutting edges using suitable tools - For clamping in chuck sizes 160 to approx. 250 mm - For machining bar stock up to Ø 42 mm or 65 mm - Includes EHS special design part removal unit - Extended chip conveyor: 800 mm Technical data Machining area - Spindle bore: 42 mm - Spindle nose: DIN 55026, size A5 - Chuck diameter: 160-175 mm / 200-250 mm - Max. turning diameter: 275 mm - Cross slide travel over center: 35 mm - Max. turning length: 450 mm - Swing over cross slide: 395 mm - Swing over bed: 520 mm Tool turret - Tool mounts for cylindrical shank DIN 60880: 12 pcs - Shank diameter: 30 mm - Tool cross-section: 20x20 mm - Index time for 1 station: 0.5 sec Godpfowwl Iuox Adqouh - Index time additional stations: 0.15 sec Feed drives X-axis: - Travel: 210 mm - Feed force: 5,000 N - Rapid traverse/traverse speed: 15 m/min Z-axis: - Travel: 450 mm - Feed force: 6,000 N - Rapid traverse/traverse speed: 18 m/min Y-axis: - Travel: ±35 mm - Feed force: 6,000 N - Rapid traverse/traverse speed: 10 m/min C-axis: - Speed: 100 rpm - Torque: 140 / 196 Nm - Electric resolution: 0.001° Tailstock - Quill diameter: 70 mm - Quill stroke: 60 mm - Fast retract stroke: 280 mm - Quill force at 55 bar: 8,600 N - Taper according to DIN 228: Mk 4 Steady rest - Clamping range: 8 - 95 mm Parts catcher - Max. part length: 250 mm - Max. part weight: 3 kg

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 43.000 h, Fungsionalitas: berfungsi sepenuhnya, daya motor spindle: 3.700 W, kecepatan spindel (maks.): 10.000 rpm, berat keseluruhan: 5.000 kg, lebar total: 1.500 mm, panjang total: 4.000 mm, tinggi total: 2.400 mm, Diameter batang (maks.): 20 mm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 40 m/menit, daya: 24 kW (32,63 hp), jarak gerak sumbu Z: 205 mm, Perlengkapan: dokumentasi / manual, Kami menawarkan salah satu mesin kami untuk dijual, yang akan dinonaktifkan sebagai bagian dari pembaruan armada mesin yang telah direncanakan. Mesin yang dimaksud adalah mesin bubut kepala geser TRAUB TNL 18P, diproduksi pada tahun 2013, dalam kondisi teknis yang baik. Alasan penjualan adalah akuisisi teknologi baru sebagai bagian dari modernisasi mesin kami. Jam operasi saat ini adalah 43.000. Penawaran ini juga termasuk FMB Minimag 20/3200 bar feeder, yang memastikan pemasukan material ke mesin berjalan lancar dan efisien. Sebagai bagian dari pengiriman, kami juga dapat menyediakan perlengkapan internal, termasuk bushing pemandu dan collet untuk spindle utama, spindle tambahan, dan bar feeder, cocok untuk diameter material hingga 12 mm. Gedpfxexdk Uke Adqjuh Jika Anda berminat, jangan ragu untuk menghubungi saya.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, jam operasional: 15.001 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 462, model controller: Traub TX8F, jumlah sumbu: 7, Perlengkapan: konveyor serpihan, pengumpan batang, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control: Traub TX8F MACHINE DETAILS Guodpfx Adew Uiqyjqoh Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h EQUIPMENT Main spindle Counter spindle 2 tool turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Chip conveyor

Kondisi: bekas, MESIN BUBUT OTOMATIS SATU SPINDEL TB-42 untuk diameter maksimum 42 mm Gsdpfx Aoxcpi Rsdqouh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 47.600 h, nomor mesin/kendaraan: 325, System: TX8H Spindle bore: 80 mm Maximum turning length: 750 mm Turning diameter: 340 mm Power: 22 kW Number of tool holders: 12 Shank diameter: 40 mm Driven tools at all positions X axis Z axis C axis Automatic tailstock Guodpfx Aoh Dzqlsdqsh Chip conveyor

Kondisi: baik (bekas), Tahun pembuatan: 1993, - TRAUB control TX 8F - Spindle bore: 42 mm - Working spindle speed: 40 - 4,000 rpm - 4 cutoff slides: 60 mm stroke - 8-position turret - High-pressure pump: 25 bar - Rear-side machining (dual-spindle) Gsdpfx Aeldd Iqodqjuh - Bar feeder (3 m) - Chip conveyor

Kondisi: bekas, Tahun pembuatan: 1993, Detail Teknis: Gerak x: 400 mm Gerak y: 300 mm Gerak z: 400 mm Kecepatan spindle: 8000 rpm Kontrol: Fanuc OM Meja penjepit: 500x300 mm Jumlah tempat magazin: 16 buah Gsdpfxeu Idn Ho Adqeuh Taper alat: SK40 Jarak spindle kerja/permukaan penjepit maks.: 50-450 mm Jumlah palet: 2 buah/part Kebutuhan daya total: 10 kW Berat mesin sekitar: 2,5 t Dimensi mesin (PxLxT): 2,4x1,8x2,5 m Ukuran transportasi mesin: 2,45x1,8x2,5 m - Lemari listrik - Sistem pendingin - Konveyor serpihan merk META (Tinggi angkut 1500mm; Lebar 200mm) Fungsi pergantian meja tidak beroperasi.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Traub CNC Lathe TNA300Y, TX8H, Tahun 2000 Gsdpfx Asxby N Ssdqjuh Sumbu Y, sumbu C, penggerak alat berputar, VDI30, silinder penjepit berongga 65mm, Chuck collet 185 E 1 turret VDI30, tailstock, konveyor serpihan, LNS Hydrobar Kurang lebih 38.000 jam produksi Fsdb Umgew Svfrexiogg Sangat terawat, kondisi baik. Tersambung listrik, dapat dilihat sampai 29.08.2025

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, jam operasional: 38.433 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 489, Diameter batang (maks.): 65 mm, model controller: TRAUB TX8F, panjang batang: 3.000 mm, jumlah sumbu: 7, Perlengkapan: konveyor serpihan, pengumpan batang, Mesin CNC otomatis bubut dengan tujuh sumbu serta spindle utama dan spindle balik! RINCIAN TEKNIS Sumbu dan spindle Jumlah sumbu: 7 Spindle utama: ada Spindle balik: ada Jumlah revolver: 2 Sumbu C: 2 Sumbu Y: 1 Kontrol: TRAUB TX8F DETAIL MESIN Jam operasi: 38.433 jam Guedpfx Asw Uiktodqsh PERLENGKAPAN Majalah pengisi batang otomatis Stamag DN61 (diameter batang 65 mm, panjang batang 3 m) Sistem pendingin Pengeluaran komponen Konveyor serbuk Filter udara

Kondisi: bekas, CNC mesin otomatis bubut panjang TRAUB TNL 12/7 Gujdsxbtz Uopfx Adqjh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Kontrol: TX8i Lubang spindle: 80 mm Panjang pembubutan maksimum: 750 mm Gsdpfx Asw Rq Tzodqsuh Diameter pembubutan: 340 mm Daya: 22 kW Jumlah dudukan alat: 12 Diameter shank: 40 mm Alat berputar di semua posisi Sumbu X Sumbu Z Sumbu C Tailstock Konveyor serbuk Sistem pendingin

Tahun pembuatan: 1978, Kondisi: bekas, Article: CNC-controlled automatic lathe Brand: Traub Model: TF60 / 140 Year of manufacture: 1978 Bar automatic lathe Guedpfx Adsl Rmqteqsh Please contact us for further information and pictures via email (at) or

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 6.000 rpm, Traub TNK36 termasuk LNS Quick Load Servo3 pemuat batang Kontrol: TX8i Spindel utama: lubang 36 mm Gedpow U Atujfx Adqsuh Kecepatan putar: 6.300 rpm Sumbu C: 0,001° Spindel lawan sebagai spindel bermotor Unit pendorong benda kerja Turret alat: 12 posisi Konveyor sabuk engsel: KNOLL Sistem pendingin dan pelumas: 450l & 30 bar Ulir tanpa chuck kompensasi Perangkat depan 5-posisi dengan sled Z3 – 4 alat Majalah pemuat batang: LNS Quick Load Servo 65 D: 8–36 mm Panjang: maks. 750 mm Dokumentasi dan ekspor tersedia dengan biaya tambahan. Inspeksi di bawah daya dimungkinkan. Kami dengan senang hati mengirimkan detail tambahan atau mengatur kunjungan di lokasi.

Kondisi: bekas, Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 853, Hanya memproses plastik, bukan logam. Mesin harus diangkut dan dimuat keluar dari ruangan oleh pembeli. Gsdew Uqlfepfx Adqouh

Kondisi: sangat baik (bekas), Traub TNL12 CNC Swiss Kapasitas 12 mm Jam produksi: 25.596 jam Godpfx Adew R E Adeqeuh Sistem Pemadam Api Kraft & Bauer Filter kertas: Kompakt Band Filter Konfigurasi sesuai foto (foto tambahan menyusul) Mulai produksi tahun 2009 (model pameran asli) Bar feeder FMB 12 kaki Pengumpul kabut Konveyor serbuk "2 mesin tersedia"

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turret heads: 1 MAIN SPINDLE - Spindle drive power: 10.7 kW - Spindle speed: 6300 rpm - Max. bar diameter: 36 mm - Min. C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 10.7 kW - Spindle speed: 6300 rpm - Max. bar diameter: 36 mm - Min. C-axis resolution: 0.001° - Travel X/Z: 370 x 250 mm LEFT UPPER TURRET - Number of positions: 12 - Number of live positions: 12 - Travel X/Z: 50/100 mm - Travel Y: +/- 20 mm - Live tool speed: 6000 rpm - Live tool power: 5.5 kW DRILLING UNIT - Number of live positions: 4 - Live tool speed: 6000 rpm Gusdpfx Aeuhadhsdqsh - Live tool power: 4.3 kW - Travel X/Z: 370 x 270 mm OPPOSITE DRILLING UNIT - Number of tools: 5 - Number of driven tools: 4 - Driven tool speed: 6000 rpm - Driven tool power: 4.3 kW - Strokes X/Y: 73 x +/-50 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 33 kW WEIGHT AND DIMENSIONS - Required space: 3335 x 1222 mm - Machine height: 1680 mm - Machine weight: 4000 kg MACHINE HOURS - Power-on hours: 41,698 h - Operating hours: 11,346 h EQUIPMENT - Control unit: TRAUB TX 8i - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts conveyor belt - Bar loader: LNS HYDROBAR EXPRESS 332 (2005)

Kondisi: bekas, Tahun pembuatan: 2005, Turning diameter: 275 mm Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% DC: 25.20 kW Drive power 40% DC: 30.20 kW Torque at 40% / 100% DC: 180 / 135 Nm Spindle speeds – stepless: 1 – 5,000 rpm Spindle diameter in front bearing: 110 mm C-axis: 1 – 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Guedpfx Aew E Nnbjdqsh Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% DC: 5.80 kW Torque at 25% DC: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No.2 / No.3 / No.4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret – number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 – 6,000 rpm Drive power 25% DC: 5.80 kW Torque at 25% DC: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 – 3,200 mm Bar diameter: 18 – 63 mm Hexagonal max.: 45 mm Total power requirement: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, 1 pc. vertical tool carrier with B-axis, Extraction unit, chip conveyor, coolant system with coalescence separator. Bar loader TRAUB Stamag DNH61 / 3000 2 pcs. SMW KNCS-N 170-43 3-jaw chucks 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various non-driven tool holders 6 pcs. various driven tool holders Spare parts package

Kondisi: bekas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle head strokes (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of live tool positions on the turret: 6 - Max. diameter at subspindle: 12.7 [mm] - Subspindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and subspindle - Brake for main spindle and subspindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor Gjdpsuhav Djfx Adqsuh - Various static and driven tool holders

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z-axis stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] OPPOSITE MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control unit: Traub TX8i - Driven guide bushing Gsdpfx Adsuhaw Ujqouh - Coolant tank - Bar feeder: FMB Minimag

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm Gsdpfx Aeuhaxfjdqsuh - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 mm - Y travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm SUB MACHINING - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - Control system: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum resolution C-axis: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 Gsdpfx Ajuhawzsdqeuh - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar loader: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet chucks for feed: F20 - Set of collet chucks for feed: F16 - Sleeve: 4 - Set of tubes and collets for bar feeder - Set of spare parts

Kondisi: bekas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 130 mm Gjdpeuhawhjfx Adqouh - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 26,709 h SUB-SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 16,854 h - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 6 - Number of live positions: 6 - X-axis travel: 35 mm - Z-axis stroke: 50 mm - Driven tool speed: 8,000 rpm LOWER TURRET HEAD - Number of positions: 6 - Number of live positions: 6 - X-axis travel: 35 mm * Y-axis travel: -9.5 / +28 mm - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 16 kVA WEIGHT AND DIMENSIONS - Space requirement: 2,850 x 1,100 mm - Machine height: 1,480 mm - Machine weight: 2,000 kg EQUIPMENT - CNC control: Traub TX 8i - Driven guide bushing - Parts removal unit - Parts conveyor belt - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 l * with paper filter - Bar feeder: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 [mm] - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 4 COUNTER OPERATION - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 18 [kW] ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 [l] - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven toolholders: 2 - Number of fixed toolholders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeves: 4 - Set of trays and collets for bar loading magazine Gedpfx Aouhawuodqjuh - Tool presetting device

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 Gusdpfx Ajuhadzsdqoh - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg OPERATING HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2 HAINBUCH