Beli Traub Tns 42 bekas (93)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x rotary tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and sub spindle, parts catcher, bar feeder Iemca Master 880MP-E. Condition Very well maintained, good condition, serviced. The machine geometry has been checked and adjusted/set. Machine can be inspected under power – or video available. Warranty: 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinder. Kedpswi I Eysfx Aa Nsdg The warranty expressly only covers spare parts, not downtime or labor hours, travel time. Warranty does not apply to parts other than those listed above, e.g., wear parts, electrical, electronics, hydraulics, etc.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8H, year 2001 • 2x 10-position turrets with driven tool holders, VDI30 Kdedpfxjwi Izhs Aa Neg • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 clamping system on main and sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts manual, circuit diagram, ATC optics Very good condition. Can be inspected under power. The machine geometry has been checked and adjusted/set.

Kondisi: bekas, CNC mesin otomatis bubut panjang TRAUB TNL 12/7 Kodpoxbtz Ujfx Aa Nsdg

Kondisi: bekas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle head strokes (fixed/driven guide bushing): 130/80 [mm] Kdedpfx Aasuhav Ds Neg - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of live tool positions on the turret: 6 - Max. diameter at subspindle: 12.7 [mm] - Subspindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and subspindle - Brake for main spindle and subspindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various static and driven tool holders

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] Kdsdpfx Aaouhaw Ue Neg - Z-axis stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] OPPOSITE MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control unit: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° Kjdeuhaxfjpfx Aa Nsdg SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 mm - Y travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm SUB MACHINING - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - Control system: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum resolution C-axis: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar loader: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet chucks for feed: F20 - Set of collet chucks for feed: F16 Kdedpfeuhawzox Aa Njg - Sleeve: 4 - Set of tubes and collets for bar feeder - Set of spare parts

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE Kodpfx Aouhawuea Nodg - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 [mm] - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 4 COUNTER OPERATION - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 18 [kW] ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 [l] - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven toolholders: 2 - Number of fixed toolholders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeves: 4 - Set of trays and collets for bar loading magazine - Tool presetting device

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg OPERATING HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel Ksdpfx Aasuhadzs Nodg - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2 HAINBUCH

Kondisi: sangat baik (bekas), Traub TNL12 CNC Swiss Kapasitas 12 mm Kdsdpfew R E Adex Aa Nsg Jam produksi: 25.596 jam Sistem Pemadam Api Kraft & Bauer Filter kertas: Kompakt Band Filter Konfigurasi sesuai foto (foto tambahan menyusul) Mulai produksi tahun 2009 (model pameran asli) Bar feeder FMB 12 kaki Pengumpul kabut Konveyor serbuk "2 mesin tersedia"

Kondisi: belum diuji (bekas), Tahun pembuatan: 1994, jam operasional: 8.000 h, Fungsionalitas: belum diuji, Machine in good condition Kdsdpfx Aev Im Sdsa Nsg