Beli Traub bekas (96)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Traub automatic lathe Ijdewcqv Iepfx Aa Noal

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 22.232 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 317, panjang pembubutan: 1.000 mm, diameter pembubutan: 680 mm, daya motor spindle: 60.000 W, kecepatan spindel (maks.): 2.800 rpm, Perlengkapan: konveyor serpihan, RINCIAN TEKNIS Panjang pembubutan: 1.000 mm Diameter pembubutan: 680 mm Daya motor spindle: 60.000 W Putaran spindle maksimum: 2.800 rpm RINCIAN MESIN Model kontrol: TX 8H Data listrik Iedew Rp Svopfx Aa Njal Tegangan operasi: 400 V 3~ Tegangan kontrol: 24 V ~ Tegangan katup: 24 V – Tegangan kopling: 24 V – Daya total: 60 kW Arus total: 100 A Waktu operasi spindle: 22.232 jam PERLENGKAPAN Dokumentasi/manual Putaran dapat diatur secara kontinu Konveyor serbuk RUEZ SFWW2 Oil separator Pemegang alat VDI40 Dokumentasi lengkap Catatan: Pembongkaran dan pemuatan dapat didukung dengan personel dan derek.

Tahun pembuatan: 1983, Kondisi: siap digunakan (bekas), Swing diameter: 320 mm, turning length: 1,000 mm, spindle bore: 80 mm, spindle speed: 3,150 rpm, travel X/Z: 265 mm / 1,000 mm. Machine dimensions X/Y/Z: approx. 5,500 mm / 2,400 mm / 2,400 mm, weight: approx. 7,000 kg, control system: Traub System TX-8. Includes a tool set, three-jaw chuck, and bar feeder with collets. Documentation available. Inspection on site is possible. Iedjwzld Dopfx Aa Neal

Kondisi: bekas, CNC mesin otomatis bubut panjang TRAUB TNL 12/7 Iodexbtz Uspfx Aa Noal

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x rotary tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and sub spindle, parts catcher, bar feeder Iemca Master 880MP-E. Iaodswi I Eyjpfx Aa Nel Condition Very well maintained, good condition, serviced. The machine geometry has been checked and adjusted/set. Machine can be inspected under power – or video available. Warranty: 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinder. The warranty expressly only covers spare parts, not downtime or labor hours, travel time. Warranty does not apply to parts other than those listed above, e.g., wear parts, electrical, electronics, hydraulics, etc.

Kondisi: baik (bekas), Tahun pembuatan: 1989, 1 x automatic lathe Traub TD 16 Year of manufacture: 1989 with hydraulic single bar feeder LNS Hydrobar 3.16 -HS 4.4 Year of manufacture: 1989 Equipment: 6-position turret Iasdpfxovga A Te Aa Nol Quick-change material clamping Sliding headstock device Centralized lubrication by Vogel Accessories: see photos The machine can be inspected under power.

Kondisi: baik (bekas), Tahun pembuatan: 1994, TRAUB TNS 65 D / 5-Axis CNC Turning and Milling Machine - TX8 D Control - Complete technical data available in photos - Year of manufacture: 1994 - Hydrobar bar feeder - Various driven tool holders Iaedpfx Aajw D Df Ee Nsl - Tool holders - Three-jaw chuck - Complete documentation Errors and omissions excepted.

Kondisi: sangat baik (bekas), Traub TNL12 CNC Swiss Ijdpfx Aajw R E Ado Noal Kapasitas 12 mm Jam produksi: 25.596 jam Sistem Pemadam Api Kraft & Bauer Filter kertas: Kompakt Band Filter Konfigurasi sesuai foto (foto tambahan menyusul) Mulai produksi tahun 2009 (model pameran asli) Bar feeder FMB 12 kaki Pengumpul kabut Konveyor serbuk "2 mesin tersedia"

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), Swing diameter over bed/cross slide: 360mm/160mm, distance between centers: 800mm, travel X/Z: 205mm/810mm, spindle speed: 3,150 rpm, spindle bore: 60mm, tool stations: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3,300mm/1,800mm/1,800mm, weight: approx. 3,300kg, control: Traub System TX-8. An on-site inspection is possible. Iaedpfxewmqx Do Aa Nsl

Kondisi: bekas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle head strokes (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of live tool positions on the turret: 6 - Max. diameter at subspindle: 12.7 [mm] - Subspindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and subspindle - Brake for main spindle and subspindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various static and driven tool holders Iaodpfjuhav Dex Aa Nel

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8H, year 2001 Ijdpfxswi Izho Aa Neal • 2x 10-position turrets with driven tool holders, VDI30 • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 clamping system on main and sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts manual, circuit diagram, ATC optics Very good condition. Can be inspected under power. The machine geometry has been checked and adjusted/set.

Kondisi: belum diuji (bekas), Tahun pembuatan: 1994, jam operasional: 8.000 h, Fungsionalitas: belum diuji, Machine in good condition Ijdpfx Aev Im Sdea Nsal

Kondisi: baik (bekas), Tahun pembuatan: 2007, Traub TNX 65/42 Fräs- und Drehzentrum Baujahr 2007 Seriennummer: 7060107 Inbetriebnahme: 2010 TX 8i-S Steuerung (Mitsubishi/Traub-basierte Steuerung mit Mitsubishi-Antrieben und -Motoren) 15 CNC-Achsen Vier (4) X-Y-Z Revolver mit jeweils 10 Positionen (bis zu 20 Werkzeuge je Revolver möglich) 65 mm Spindeldurchlass an Haupt- und Gegenspindel (Gegenspindel mit Kühlmittelspülung) Fußpedalsteuerung zum Spannen/Lösen der Spannfutter Servogesteuerte Portaleinheit Hydraulisch schwenkbar mit pneumatischem Fertigteil- und Reststückgreifer Fertigteilförderband RESY Papierband-Kühlschmierstofffilter Knoll-Kühlmitteltank mit BKW Kältemittel-Temperaturregelung 20 bar Hochdruck- und 8 bar Niederdruck-Kühlmittelpumpen Knoll Späneförderer FMB Turbo 5-55 Stangenlademagazin (neu 2010) 2 Einzelstangen-Drehhalter 2 Doppelstangen-Drehhalter 1 Abstechhalter 1 angetriebener doppelter radialer ER Spannzangenhalter 1 angetriebener radialer ER Spannzangenhalter Ijdpjq Npqmofx Aa Noal 4 radiale angetriebene ER Spannzangenhalter 1 radialer angetriebener Fräserhalter 1 winkelverstellbarer angetriebener ER Spannzangenhalter 2 radiale angetriebene Messerkopfhalter 2 axiale angetriebene Fräserhalter 6 axiale angetriebene ER Spannzangenhalter 43 zusätzliche Werkzeughalter auf separater Liste (siehe Anhang) Hainbuch Hauptspindel-Spannzangenfutter Röhm 2-Backen-Futter an der Gegenspindel 2 Ersatzsätze Kugelumlaufspindeln und Lagerpakete für die Z-Achse.

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub-spindle power: 18.5 kW / 11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm / 2000 mm / 1800 mm, weight: approx. 4750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. Inspection on site possible. Iodpjv Scrhjfx Aa Noal

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] Isdpfouhaw Ujx Aa Njal - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z-axis stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] OPPOSITE MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control unit: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 51.400 h, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main / sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, new hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed holders Iodpfewxc Hksx Aa Nsal Short bar loader Breuning Approx. 114,586 power-on hours Approx. 51,400 production hours Good condition Under power, can be inspected Delivery time approx. 2 weeks by arrangement

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), A CNC twin-spindle lathe Traub, completely overhauled in 2025, is available. Turning length: 450mm, spindle bore: 65mm, max. speed: 4000rpm, main spindle/sub-spindle power: 18.5kW/11kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed travel: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed travel: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed travel: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12,938h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation available. An on-site inspection is possible. Iaodpfx Aasv Scrbs Nel

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 Iedpfx Aasuhaxfs Neal - X travel: 35 mm - Y travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm SUB MACHINING - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - Control system: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum resolution C-axis: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm Iedpfxouhawzj Aa Nsal ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar loader: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet chucks for feed: F20 - Set of collet chucks for feed: F16 - Sleeve: 4 - Set of tubes and collets for bar feeder - Set of spare parts

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 [mm] - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 4 COUNTER OPERATION - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 18 [kW] ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 [l] - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven toolholders: 2 Iajdsuhawujpfx Aa Njl - Number of fixed toolholders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeves: 4 - Set of trays and collets for bar loading magazine - Tool presetting device

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW Iaedpsuhadzefx Aa Nel ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg OPERATING HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2 HAINBUCH