Beli Udara Silinder bekas (4.402)

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine was overhauled according to Kellenberger measurement protocol and newly painted. Ncedpfxevq R Uzs Alkjr The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter 250 mm Grinding length 400 mm Centre height 125 mm Control Fanuc 21i-T Machine serviced and partially overhauled. - New grinding spindle bearings - New X-axis spindle - Upper table re-ground - New table geometry - New geometry from workpiece headstock to grinding spindles B-axis with 1° Hirth serration Longitudinal positioning HF internal grinding spindle GAP Ncedpfsvx Dvusx Alker Paper band filter

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm Machine equipped with reinforced workpiece spindle head for unsupported grinding of heavy workpieces. The machine undergoes a major maintenance/partial overhaul including geometry inspection protocol in accordance with the Kellenberger new machine directive. Ncedpfjv Dxxzjx Alksr At present, the machine does not comply with the essential health and safety requirements set out in BetrSichV 2015. An adjustment to the required minimum safety level must be determined by means of a risk assessment as per BetrSichV.

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Ncjdpfx Aljd Ih D Ejkjr Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. BEMA standard features include: - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display - Stepless speed control for the grinding spindle, 70–100% - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional features (at extra cost): - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: bekas, en-001 Ncodpfx Asd Ih Egelkjr

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Ncedpfsv I Eq Ssx Alker Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control: Fanuc 310is Completely mechanically overhauled. Including grinding process and setup for one workpiece. Original photo of the machine from EMO 2010. Ncedpfxsvdk N Ee Alkor CNC control: GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCBN diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Preparation for external filter Coolant shut-off for table units Fully enclosed for emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for arbour steady rest

Kondisi: bekas, Tahun pembuatan: 1999, schleifmaschine-specs-2024 Nedpfxexyadge Alkjcr

Kondisi: bekas, Tahun pembuatan: 1995, schleifmaschine-parameter-2024 Ncjdpfx Asyatx Sjlkjr

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: Nedjuxfucspfx Alkjcr - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Swiveling workpiece headstock: 360° Swiveling grinding headstock: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Workpiece weight max.—mounted: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight (approx.): 2.5 t Space requirement (approx.): 4.2 x 2.0 m As a global leader in the field of Kellenberger overhauling / retrofit, we are able not only to deliver machines in like-new quality with warranty, but also provide service for your equipment. Geometrically overhauled and newly painted, with original electrics. The photo shows a 600U that was recently delivered. - Digital display on 2 axes. Resolution of X-axis: 0.5 μm Options: Ncedot Ii Nuspfx Alksr - Encoder with digital display on workpiece spindle headstock - Encoder with digital display on grinding spindle headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in center height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in BetrSichV 2015 (Industrial Safety Regulations 2015). The necessary minimum safety objectives must be determined by a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control Nodpfx Alouxfupokecr At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Kondisi: bekas, Grinding diameter: 250 mm Grinding length: 600 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swiveling: +/- 360° Grinding head swiveling: +/- 0° Infeed (incremental): 0–9.99 mm/Ø Infeed (continuous): 0–9.99 mm/Ø Table swiveling: +/- 10° Table longitudinal travel: 700 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – between centers: 130 kg including clamping Cross travel: 270 mm Tailstock quill taper: MK3 Quill travel: 30 mm Total connected load: 5.5–7.5 kW Machine weight approx.: 2.7 t As a world-leading company in the area of Kellenberger – overhaul/retrofit, we are not only able to deliver the machines in as-new quality and with warranty, but can also offer you full service for your machines. Overhauled to Kellenberger standards, including new, modern, and future-proof controls. Image shows a previously delivered machine. - Operation via touch panel is extremely simple. - The symbolism on the control panel is virtually identical to the original system, so no retraining is necessary. - Diagnostic function with display of PLC messages and the digital I/O - Dressing functions can be expanded or modified as per customer requirements. - Oriented spindle stop for the workpiece spindle available upon request. - New maximum infeed amount 40 mm, can be extended upon request. - Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Encoder with digital readout in the workhead - Encoder with digital readout in the grinding head (no vertical adjustment with spindle possible) Nodpfx Ajd Ih Ehelkscr - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment. - Increased centre height up to max. 225 mm - Speed control for grinding spindle Included: - New DGS paper band filter - Operating tools - Chuck tube for chuck Other accessories available on request. The machine is equipped on the X-axis with an electronically controlled infeed system with stepper motor drive. Hydraulic table longitudinal movement and rapid traverse. Versatile application in production for external and internal cylindrical grinding, or for simultaneous OD, face, and ID grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Gauging/measurement control Currently, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in the BetrSichV 2015. Achieving the required minimum level of protection must be determined through a risk assessment in accordance with the BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Machine weight approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Nodpot Ii Nbsfx Alkjcr Photo shows a recently completed machine with partially different options. Fanuc 21i control system - Grinding head UR 1-2-3 External/Internal/Face grinding - B-axis automatic, 1° Hirth gearing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing system KEL-BALANCE - Left grinding wheel mount: 400 mm diameter - Right grinding wheel mount: 300 mm diameter - Internal grinding attachment with belt drive - Tailstock with micro adjustment - Fine adjustment upper slide - Paper band filter SBP4 240 l

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Left grinding wheel 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR control system and BEMA cylindrical grinding interface. Fitted with a new, maintenance-friendly enclosure. Ncodpfx Alst Ii Rfokor Completely overhauled according to Kellenberger inspection protocol.

Kondisi: bekas, Tahun pembuatan: 1990, Penyetelan cepat dudukan spindle gerinda dengan bantalan udara Nedpfx Asxbh Ebelkscr

Kondisi: bekas, Tahun pembuatan: 1986, schleifparameter-v1 Njdpfx Alexyadmskjcr

Kondisi: bekas, Tahun pembuatan: 1995, schleifmaschine_01 Nedpfxexyadaj Alkscr

Kondisi: baik (bekas), Tahun pembuatan: 2000, Universal cylindrical grinding machine Studer S30 leanPRO Studer S 30 Year of manufacture: 2000 Machine hour meter Regular maintenance intervals by manufacturer (last maintenance 11/25, report available) Wheel replacement: According to manufacturer interval Hydraulics inspection: Annual inspection Buffer battery replacement: Included in Studer maintenance CNC control: FANUC 16T Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 125 mm Distance between centers: 650 mm Optional grinding cycles for increased center height Nsdpeyx Hgzefx Alkscr Table adjustment: 11° Glass scale in X / Z axis Automatic paper band filter Workpiece spindle head: Approx. 1–1,000 rpm Internal grinding device with accessories LED spot with flexible arm Grinding wheel: 400 x 80 mm Frequency converter for external grinding spindle Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Live center and MK4 included for WSS Workpiece spindle nose: MK5 Tailstock: MK3 Quill stroke: 40 mm Machine weight: approx. 3,400 kg Floor dimensions (L x W): 2,300 x 1,550 mm Machine height: approx. 2,000 mm Electrical supply Measuring system: Digital Coolant supply with filter fleece, tank capacity 300L Machine hour meter (control on): 35,978 h

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. Njdpfoynmpgox Alkscr – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, frekuensi input: 50 Hz, Tersertifikasi DGUV hingga: 04/2027, jenis arus masuk: AC (pendingin udara), nomor mesin/kendaraan: 2026, Unox Bakerlux 3 Shop.Pro Touch Oven Pemanggang Baru BARU BARU BARU BARU BARU BARU BARU BARU BARU Unox Oven konveksi untuk 3 loyang ukuran 600 x 400 mm Konstruksi stainless steel dengan kaca depan Pintu oven dibuka manual ke depan-bawah Panel sentuh dengan pengelolaan program Pengaturan suhu hingga 260°C Pasokan uap (steam injection) melalui sambungan air tetap Oven konveksi bertenaga tinggi Koneksi 230V dengan steker Ukuran: 800 x 811/860 x 425 mm (PxLxT) Oven baru, telah diuji SAB Termasuk garansi & layanan suku cadang Kualitas dari mitra resmi Unox! Manfaatkan pengalaman lebih dari 35 tahun! Njdpfx Asxmrkxjlkjcr Kunjungi Unox baking center kami!

Kondisi: sangat baik (bekas), Dijual holder alat profesional SK40 (kode: 83 814 114, SK-40 Ø14x80, no. 12409096) lengkap dengan end mill silinder VHM Ø14 mm yang terpasang. Holder tersebut berventilasi, sehingga memberikan pendinginan efektif dan memperpanjang umur pakai alat. End mill multi-mata karbida dalam kondisi sangat baik – ideal untuk pengerjaan baja, besi cor, stainless steel, dan material keras lainnya. Kondisi: bekas, berfungsi penuh. Ncsdpfx Alew Rrxxsker

Kondisi: baik (bekas), Tahun pembuatan: 2013, Blower Udara Ionisasi Haug Ion-Air Blower Produsen: Haug GmbH & Co. KG Model: Ion-Air Blower Tipe: Ion-Air blower Id. 04.0361.000 Nomor seri: 13889018 Tahun pembuatan: 2013 Kelas pelindung: IP40 Tegangan primer: 230 V Frekuensi: 50–60 Hz Daya yang diserap: 70 VA Nodpjytqkrsfx Alkocr Tanda CE: tersedia Fungsi: Netralisasi muatan elektrostatik melalui aliran udara terionisasi Area aplikasi: Pengolahan plastik, mesin injection moulding, lini pengemasan dan otomatisasi

Kondisi: bekas, Tahun pembuatan: 2000, jumlah rol: 3, diameter rol atas: 180 mm, ketebalan lembaran (maks.): 7 mm, berat keseluruhan: 2.465 kg, panjang total: 1.530 mm, Silinder mekanik Merek: Birlik Model: MSMS 1530-180 Berat: 2.465 kg Ncodpfx Aeylx Nmolker Tahun: 2000 Panjang: 1530 mm Kapasitas pembengkokan: 7 mm Diameter rol atas: 180 mm Rol belakang bermotor

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2010, nomor mesin/kendaraan: SN214289, Fungsionalitas: berfungsi sepenuhnya, Completely overhauled, delivery time 5-6 weeks, new pictures to follow, new electrical system including conversion to thyristor control and installation of new regulators. -Maximum temperature: 260°C -Capacity: 9,000 liters -Nabertherm Controller P 300 (9 programs, each with 40 segments) -HAS (High-Accuracy System): high-precision temperature control and documentation system -Double door Ncodpfx Asyxl Epjlksr -Internal dimensions (W x D x H): 1,500 x 3,000 x 2,000 mm -External dimensions (W x D x H): 2,400 x 3,860 x 2,830 mm -Temperature limiter -Thermocouple type K -Signal tower -Loading ramp, oven with floor insulation, high temperature uniformity -2 charging carts -Circulation rate: 18,000 m³/h -Output: 93 kW -Documentation, CE certified -Electrically tested and supplied with current DGUV test protocol The oven is calibrated according to DIN 17052 as of February 2025. This standard ensures that the temperature throughout the oven chamber remains within specified tolerances. Typical applications include heat treatment of metals or use in additive manufacturing (3D printing), whenever standard-compliant processes are required. Inspection possible by appointment at our warehouse at any time. We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Keywords: oven, ovens, drying oven, industrial oven, drying cabinet, heat oven, heating cabinet, recirculation oven, chamber oven, preheating oven, chamber recirculation oven, tempering furnace, hardening oven.