Beli Udara Stabschrauber bekas (2.674)

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa Giedpevz Hq Hofx Adtel - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: bekas, 4 pieces of Elmo Rietschle 539283 air filters for vacuum pumps or similar applications. Giedoqzmtnepfx Adtjl

Tahun pembuatan: 2005, Kondisi: bekas, Kapasitas 500 liter Tekanan kerja 11 bar Rentang suhu -10 hingga +50 °C Dimensi (PxLxT): 1,8 x 0,8 x 0,8 m Berat sekitar 200 kg Giodpev Rrrnofx Adtol Tangki udara bertekanan bekas dari Maschinen- und Behälterbau Mittweida GmbH. Terdapat manometer untuk penunjukan tekanan, 4 koneksi pengambilan, 1 koneksi suplai. Ini adalah tangki bekas, oleh karena itu kami jual tanpa jaminan apa pun. Dealer dengan stok dan ruang pameran seluas 1.600 m².

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), 12 months warranty, in stock, brand new unit Electrically heated circulating air chamber furnace including base frame Gisdpfxexp Rm Re Adtjl Nabertherm NA 120/85 - Tmax 850°C - Furnace chamber: 450 x 600 x 450 mm (W x D x H) - Working chamber: 360 x 480 x 360 mm (W x D x H) * - Volume: 120 liters - External dimensions: 990 x 1470 x 1550 mm (W x D x H) - Loading height: 900 mm - Temperature uniformity: ± 5°C according to DIN 17052-1 in the empty usable space - Permissible batch weight: 120 kg with evenly distributed load - Controller: C 540 (10 programs, each with 20 segments) - Max. batch weight per tray support: 60 kg - 1 insertable tray included as bottom level - Tray supports included: 2 pieces (no trays!) - Max. number of batching levels: 3 levels with approx. 70 cm spacing - Connected load max.: 14 kW - Heating capacity max.: 13 kW - Fan output: approx. 500 m³/h - Mains voltage: 380 - 415 V 3/PE, 50Hz, no RCD required - Documentation: CE declaration *The working chamber is 90 to 120 mm smaller than the furnace chamber. This specification is required for adequate air circulation when a solid part is loaded into the furnace! If you have several smaller parts, you can utilize the entire furnace chamber! Inspection at our warehouse possible at any time! Furnace, industrial furnace, curing oven, heating cabinet, heat oven, laboratory furnace, drying oven, tempering oven, chamber furnace, kiln, hardening furnace, annealing furnace

Kondisi: baru, Tahun pembuatan: 2025, Firebox output: 49 kW Working output: 45 kW Brand new in original packaging: Yes Warm air blower, flue gas fan, electronic control with digital display: included Giedpopn Nyzofx Adtsl Intake air filter, recirculation intake filter: large-surface intake filter with no loss of performance / included Warm air ducting pipes: 2 x 200 mm with plug-in, freely rotatable 90° bends Flue outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Air delivery: 3500 m³/h Intake air filter: Yes, large-surface intake filter with no loss of performance Power consumption: 550 W Designed for room volume: 1000 m³ Weight: 310 kg

Tahun pembuatan: 2011, Kondisi: baik (bekas), en-503260 Gisdpfjx Eifkex Adtol

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg Gisdpfevz Hqyex Adtel - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: bekas, 2 pieces of air filters Elmo Rietschle 84524 / 0001 for vacuum pumps or similar applications. Giedpfxoqzmtrj Adtsl

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, daya: 114 kW (155,00 hp), bahan bakar: diesel, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Heating gun "CLK 120" dari REMKO adalah pemanas berkekuatan tinggi yang dapat digunakan untuk aula, bengkel, tenda acara, bahan-bahan, rumah kaca, dan lain-lain. Saat ini masih tersedia 3 unit di stok untuk pengiriman segera. Kondisi: Baru / tidak terpakai dari pembersihan gudang / likuidasi Ruang lingkup pengiriman: 1 unit Pemanas Remko CLK 120 dengan burner minyak 1 unit Tangki solar Roth portabel 1000 L 1 unit Termostat ruangan dengan kabel penghubung Daya panas nominal: 114 kW Aliran udara: 8050 m³/jam Gjdpfx Ajxgbbtsdtjil Bahan bakar: Minyak pemanas EL Konsumsi bahan bakar: maks. 11,2 L/jam Kehilangan gas buang: maks. 9% Koneksi gas buang: Ø 200 mm Outlet udara: Ø 500 mm Tegangan sambungan: 230 V Dimensi (T/P/L) sekitar 1350 x 920 x 2100 mm Berat: sekitar 296 kg Mesin dapat dilihat di lokasi dengan perjanjian. Semua informasi tanpa jaminan. Penjualan sewaktu-waktu dapat berubah.

Tahun pembuatan: 2017, Kondisi: diremaj di bengkel (bekas), sedang dalam proses overhaul, waktu pengiriman akhir Januari 2026, garansi 12 bulan - Suhu maksimum 200°C; suhu dapat dinaikkan hingga 250°C sesuai permintaan - Dimensi bagian dalam L 1000 x P 1000 x T 1500 mm - Dimensi luar L 1765 x P 1425 x T 2300 mm - dilengkapi dengan Controller Jumo Dicon Touch Gsdpfx Adexp Rnujtoil - Rel masuk untuk pemuatan oven - Daya pemanas 36 kW - Berat sendiri: 780 kg - Stut udara buang; kipas udara buang dan katup elektrik dapat dipasang sesuai permintaan - Troli charging tersedia atas permintaan (foto) - Dokumentasi, deklarasi CE Pemasangan dan commissioning dapat kami tawarkan. Kunjungan ke gudang kami dapat dilakukan dengan perjanjian. Oven, oven industri, oven pengering, oven pembakaran, lemari pemanas, oven temper, oven kamar, oven pengecatan, lemari pengering sirkulasi, oven sirkulasi udara

Kondisi: baik (bekas), Tahun pembuatan: 2006, berat kosong: 2.300 kg, Dijual alat pengangkat yang berfungsi dengan baik tempat kerja lebar ketinggian kerja 8,8 m pertukaran dan transportasi bisa dinegosiasikan info lebih lanjut silakan telepon atau kirim pesan Gjdpfoxq Rhdox Adtoil

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 800 kg, daya: 19,5 kW (26,51 hp), kapasitas tangki: 200 l, laju aliran volumetrik: 350 m³/jam, Pengering udara kering dengan silo granulat dan pemisah material Produsen: Piovan Tipe: DSN521NE No.: ODE 6242 4 silo granulat terisolasi masing-masing 200 L Dengan pemanas tambahan Gijdpox Na Itsfx Adtel Pemisah material 3 unit Produsen: Colortronic Instalasi ini telah diperiksa untuk semua fungsi dan sepenuhnya berfungsi!

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution. Godsvz Hqtjpfx Adtsil

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Lot terdiri dari: (1) Mesin press tempa panas 360t dengan tungku kuningan, termasuk tungku kuningan FARM Rincian Teknis: Eksenter; 22 kW; Kapasitas 360 t; kontrol Siemens; dimensi alat 240x240mm; langkah per menit 1/menit 55 Gedpfx Aoxz A Rxsdtjil

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, daya: 150 kW (203,94 hp), bahan bakar: diesel, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Heater cannon "CLK 150" dari REMKO adalah pemanas bertenaga tinggi yang dapat digunakan untuk aula, bengkel, tenda acara, material, rumah kaca, dan lain-lain. Gsdpfx Ajxli I Ssdteil Saat ini masih tersedia 3 unit di gudang untuk pengiriman segera. Kondisi: Baru / tidak terpakai dari pembersihan gudang / likuidasi Paket penyerahan: 1 unit pemanas Remko CLK 150 dengan burner minyak 1 unit tangki minyak pemanas mobile Roth 1000 L 1 unit termostat ruangan dengan kabel penghubung Beban panas nominal: 150 kW Kapasitas udara: 9710 m³/jam Bahan bakar: Minyak pemanas EL Konsumsi bahan bakar: maks. 14,8 L/jam Kerugian gas buang: maks. 9% Koneksi knalpot: Ø 200 mm Outlet udara: Ø 500 mm Tegangan sambungan: 230 V Dimensi (T/L/P): sekitar 1350 x 920 x 2100 mm Berat: sekitar 312 kg Mesin dapat dilihat di lokasi berdasarkan janji temu. Semua informasi tanpa jaminan. Penjualan antar waktu tetap menjadi hak kami.

Tahun pembuatan: 2017, Kondisi: diremaj di bengkel (bekas), dalam proses peremajaan, akhir Januari 2026, garansi 12 bulan - T maks 200°C; suhu dapat dinaikkan hingga 250°C sesuai permintaan - Dimensi dalam L 1000 x P 1000 x T 1500 mm - Dimensi luar L 1765 x P 1425 x T 2300 mm - dengan controller Jumo Dicon Touch Gsdpfx Ajxp Rn Iodtjil - Rel pengantar, untuk memasukkan barang ke oven - Daya pemanas 36 kW - Berat sendiri: 780 kg - Stut udara buang; kipas udara buang dan katup elektrik dapat dipasang tambahan sesuai permintaan - Gerobak pengisi atas permintaan (gambar) - Dokumentasi, pernyataan CE Pemasangan dan commissioning dapat kami tawarkan atas permintaan. Pemeriksaan di gudang kami dapat dilakukan dengan perjanjian. Oven, oven industri, oven pengering, oven pembakaran, oven pemanas, lemari penghangat, oven temper, oven kamar, oven curing, lemari pengering sirkulasi, oven sirkulasi udara

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, jam operasional: 5.000 h, kapasitas angkut: 230 kg, tinggi angkat: 32.000 mm, PLATFORM AERIAL SELF-PROPELLED Haulotte HA32PX Tahun 2006 Tinggi Kerja 32 m Gsdpfotyng Rex Adtsil Jangkauan Kerja 21,3 m Kapasitas Keranjang 230 Kg Jam Kerja 5000 Diperiksa dan direkondisi oleh bengkel Kondisi umum sangat baik

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, W-KRONEN HP10 LT500 Kompresor Udara Dengan Pengering Udara Refrigerasi Aerotec Terintegrasi Aerodry PRO 1000 W-Kronen HP10 LT500 adalah kompresor udara yang kuat dan andal untuk aplikasi berat di bidang kerajinan, industri, dan bengkel. Dengan pengering udara refrigerasi terintegrasi, sistem ini menawarkan solusi lengkap yang ringkas, efisien, dan siap pakai untuk menghasilkan udara terkompresi berkualitas tinggi. Data teknis: - Ukuran tangki: 500 L - Tekanan tangki: 10 bar - Kapasitas hisap: 1100 L/menit Gjdox I D H Ropfx Adtsil - Aliran keluaran: 950 L/menit - Kecepatan putar: 1200 RPM - Tingkat kebisingan LWA/dB: 97/78 - Motor: 7,5 kW / 10 HP - Volt/Hz: 400 / 50 Steker 16A

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. Godpfxevz Hqms Adtoil They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: bekas, Tahun pembuatan: 2008, - Merek: Ruthmann - Tipe: TB 220 - Tahun pembuatan: 2008 - Jam kerja: 2548 Godpjx Nazyofx Adteil - Kilometer: 126.430 - Berat: 3340 kg - Tinggi kerja: 22 meter - Jangkauan samping: 14 meter - Plat nomor Belanda - 29-VTR-5 - Plat ekspor tersedia - Sertifikat inspeksi keselamatan (buku platform kerja tersedia) - Dokumen CE tersedia - Mesin dalam kondisi sangat rapi - Berasal dari pemilik kedua - Video tersedia di website kami - Tukar tambah dan pengiriman memungkinkan

Tahun pembuatan: 2023, Kondisi: seperti baru (mesin pameran), de-en Gijdpfexp Rpfsx Adtsl

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h Gisdpfx Aevz Hqgedtjl - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Tahun pembuatan: 2023, Kondisi: sangat baik (bekas), siap dikirim dalam waktu singkat, garansi 12 bulan Dengan sistem keamanan untuk material berbahan pelarut sesuai DIN 1539. Gisdpfjxxk Rhex Adtjl -Dimensi dalam (l x p x t): 2000 x 2000 x 2000 mm -Dimensi luar (l x p x t): 2900 x 2450 x 3600 mm -Kapasitas: 8000 liter -Tmax: 260°C -Volume aliran udara buang: 950 m³/jam -Maksimum jumlah pelarut pada Tmax 260 °C: 145 g -Daya terpasang: 81 kW -Termasuk dokumentasi dan deklarasi CE Pemasangan dan pengoperasian dapat kami tawarkan bila diperlukan. Kunjungan ke gudang kami dapat dilakukan dengan perjanjian. Kami menyediakan oven industri baru dan bekas. Silakan hubungi kami! Oven, oven industri, oven pengering, kiln, oven pemanas, rak penghangat, oven tempering, oven kamar, oven pengecatan, oven sirkulasi udara, oven pelarut, pengering ruangan.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. Giedpfx Aovz Hhxodtsl A maximum of 20 meters of ductwork per connector is permitted for air distribution.

Tahun pembuatan: 2022, Kondisi: hampir baru (bekas), 1 Gsdexbtvfopfx Adtoil