Beli Wagner Pompa bekas (95)

Kondisi: bekas, Tahun pembuatan: 2010, 2010 powder coating line, excellent condition. Currently in operation, available for inspection and testing. Nsdpfx Abov Ed Uksujwb Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Process conveyor Automatic speed V = 1.2 m/min Variable speed from 0.5 to 2.5 m/min Pretreatment station MNA-3-LPG, total length 16.7 m Entry zone: L = 2.5 m a. Washing, degreasing, and phosphating: L = 3.6 m Number of spraying frames – 10 Number of nozzles per frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ tank for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip-off zone L = 3.1 m Drip-off time – 2 min 30 sec c. First rinse L = 1.2 m Number of spraying frames – 4 Number of nozzles per frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water tank Rinsing time – 1 min d. Drip-off zone L = 3.1 m Drip-off time – 2 min 30 sec e. Final rinse L = 1.28 m Number of spraying frames – 3 Number of nozzles per frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water tank Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip-off zone L = 2 m Drip-off time – 1 min 40 sec Three extraction system connections with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 unit. Automatic post-wash dryer AST-1-KLPG: Working area dimensions L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, LPG-fired, 200 kW Three fans, air supply 6000 m³/h Two extraction system connections Temperature sensor and controller Overheat sensor Circulation detector Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 unit. Automatic curing oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers, LPG-fired, 300 kW each Eight circulation fans, each with a capacity of 6000 m³/h Two extraction system connections Temperature sensor and controller Overheat sensor Circulation detector Working zone made of galvanized steel Thermal insulation 200 mm thick Curing time – 25 min 1 unit. Overhead rail conveyor system ATR for paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 units Tensioning station – 1 unit Chain lubrication station – 1 unit Rails supporting structure drawings – 1 set.

Kondisi: belum diuji (bekas), I am selling an airless high-pressure set for coating systems, without spray guns. Included are: - 2 pcs. Kovofiniš vyza 4V high-pressure pumps, ratio 33:1, output 9-25 MPa - 1 pc. Wagner 600 Airless high-pressure pump - 2 pcs. Kovofiniš high-pressure tanks, models TZ60M and TZ100M - 1 pc. Kovofiniš tank Items are in stock and available for immediate sale. Nwedpfjd Nnb Rox Abueb Total price: 1,000 euros.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 9101291, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 940 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 2.100 rpm, panjang meja: 2.600 mm, DETAIL TEKNIS Jarak lintasan Sumbu X: 2.500 mm Sumbu Y: 940 mm Sumbu Z: 1.000 mm Nwsdpfx Aoxdaiqobujb Kecepatan spindel: 2.100 rpm Panjang meja: 2.600 mm DETAIL MESIN Kontrol: Heidenhain 355 Berat: 10.000 kg PERLENGKAPAN Kepala frais SK50

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LWAC450-STES-35025, Dijual dua pengering pendingin dari L&WGmbH. Keduanya dalam kondisi bekas yang baik. Keduanya sangat jarang digunakan. Keduanya berfungsi dengan baik. HARGA: 250 euro per unit! Nedpfx Aboxq A Rdsuowb

Kondisi: bekas, Technische Merkmale: * HYDRAULISCHE ZUFÜHRUNG * SCHEIBENDURCHMESSER 500 mm Nsdpfx As Dv Rcsbuowb Bemerkungen: *HERGESTELLT IN DEUTSCHLAND

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Wagner powder coating system for sale! Powder coating equipment, year 2010, includes the following components: Spray Booth: Prima Cube 16000 Powder Supply: Powder Center Powder Recovery: Cyclon Filter 16000 Reciprocator: KHG 350 Production Line Configuration INCLUDES: I. Specifications: Maximum workpiece dimensions: LxWxH = 2600 x 400 x 1850 mm II. Equipment: 1. Technological Conveyor, automatic, speed V = 1.2 m/min, adjustable between 0.5–2.5 m/min 2. Pretreatment Tunnel MNA-3-LPG, total length 16.7 m: - Loading zone length: 2.5 m a. Washing, degreasing, and phosphating; length: 3.6 m • Number of spray frames: 10 • Number of nozzles per frame: 18 • Total nozzles: 180 • Pump capacity: 162 m³/h • Pump power: 15 kW • Process tank: 4 m³ for active solution • Integrated heat exchanger with LPG burner, 160 kW • Operating temperature: 50°C • Mechanical oil separator • Solution filter • Metering system with diaphragm pump and regulator Nwodpsww Adtofx Abueb • Washing time: 3 minutes b. Drip-off section, length: 3.1 m • Drip time: 2 min 30 sec c. Primary rinse; length: 1.2 m • Number of spray frames: 4 • Nozzles per frame: 18 • Total nozzles: 64 • Pump flow: 38 m³/h • Pump power: 3 kW • Rinse tank: 1.5 m³ • Rinse time: 1 min c. Drip-off zone, length: 3.1 m • Drip time: 2 min 30 sec d. Final rinse; length: 1.28 m • Number of spray frames: 3 • Nozzles per frame: 18 • Total nozzles: 54 • Pump flow: 33 m³/h • Rinse tank: 1.5 m³ • Pump power: 3 kW • Spare spray frame included • Nozzles per frame: 18 • Final rinse time: 1 min e. Drip-off section, length: 2 m • Drip time: 1 min 40 sec - Three exhaust connections, each with ventilator - Process chamber made of stainless steel - Pipework in PVC or stainless steel (1 unit) 3. Automatic Dryer after Washing AST-1-KLPG: - Internal dimensions (LxWxH): 7000 x 3000 x 2800 mm - Air curtains on each side minimize heat loss - One indirect heat exchanger (LPG), rated at 200 kW - Three circulation blowers, total airflow 6000 m³/h each - Two exhaust duct connections - Temperature sensor and controller - Overtemperature sensor - Airflow monitoring sensor - Chamber in galvanized steel - 200 mm thermal insulation - Drying time: 10 min (1 unit) 4. Automatic Curing Oven APT-2-KLPG for Powder Coating: - Internal dimensions (LxWxH): 10200 x 3600 x 2800 mm - Air curtain on one side to prevent heat loss - Two indirect LPG-fired heat exchangers, each 300 kW - Eight circulation blowers, 6000 m³/h each - Two exhaust duct connections - Temperature sensor and regulator - Overtemperature sensor - Circulation monitoring sensor - Galvanized steel chamber - 200 mm thermal insulation - Curing time: 25 min (1 unit) 5. Overhead Rail Conveyor System ATR-ADAX for Powder Coating Line, includes: • Straight track with hangers, length: 146 m (hanger spacing 400 mm) • Drive station: 2 units • Tension station: 1 unit • Chain lubrication station: 1 unit • Structural drawings: 1 set

Kondisi: bekas, Tahun pembuatan: 2007, Swing diameter: 500 mm Turning length: 1,500 mm Control: 802 C Swing diameter over cross slide: 280 mm Spindle bore: 82 mm Spindle speeds: 20 – 3,000 rpm Feeds – longitudinal: 0 – 5,000 mm/min Njdjw A Spijpfx Abuowb Feeds – face: 0 – 5,000 mm/min Rapid traverse longitudinal: 5 m/min Rapid traverse face: 5 m/min Main motor: 7.5 kW Travel – Z axis: 1,435 mm Travel – X axis: 295 mm Quill stroke: 150 mm Bed width: 350 mm Machine weight approx.: 3 t Required space approx.: 3.23 x 1.47 x 1.73 m Cycle control: Siemens 802 C.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Pompa piston-membran tekanan tinggi. Penggunaan universal untuk produk yang agresif, abrasif, atau sensitif terhadap geseran. Konsumsi cairan bilas sangat rendah. Untuk semua aplikasi hingga 250 bar dan 5 l/menit. Dapat memasok hingga 8 pistol semprot AirCoat. + 3 Pistol otomatis AirCoat dengan kontrol internal untuk pemasangan pada sistem pengecatan otomatis. Nodpfx Aexmf Svobuewb +KONEKTOR+SELANG UDARA/PRODUK

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MB116186, jarak pergerakan sumbu X: 1.100 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 600 mm, kecepatan spindel (maks.): 8.000 rpm, jumlah slot dalam magazin alat: 24, TECHNICAL DETAILS Travel X: 1,100 mm Travel Y: 650 mm Travel Z: 600 mm Main Spindle Maximum speed: 8,000 rpm Tool Changer Magazine positions: 24 Tool holder: BT 40 Work Table Table size: 1,300 mm x 600 mm Table load: 500 kg Nwjdpfxowtq Sko Abuob MACHINE DETAILS Control: Siemens 810D Machine number: MB 116186

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Loading lift table for covered outdoor use – used –: Price ex location: €6,950 (net) Manufacturer: Wagner Model: Special version lift table, ELS 1-10-TI-SO Year of manufacture: 2017 Construction height (h): 200 mm Effective lifting stroke (N): 1,000 mm Maintenance lift: 1,000 mm Maximum height (H): 1,200 mm Overall length: 1,800 mm Overall width: 1,000 mm Lift category: 4 Dead weight: approx. 450 kg Load capacity: 1,000 kg Load distribution: surface load or max. 1/6 as axle load when lifted Drivable when retracted: No Platform: Platform length: 1,800 mm Platform width: 1,000 mm Plug-in guardrails Condition: very good Availability: immediate Location: Stuttgart-Feuerbach 1077 Berlin Nodpfxjr Il Ukj Abujwb A detailed item description is available on request. Application: Loading lift table for covered outdoor areas, narrow side C is positioned at the ramp. Suitable for transporting Euro pallets with pallet trucks.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F00269, diameter putar di atas sled silang: 280 mm, lubang spindel: 82 mm, panjang pembubutan: 1.500 mm, diameter pembubutan: 500 mm, kecepatan spindel (maks.): 300 rpm, TECHNICAL DETAILS Control: Siemens 802 C Turning diameter: 500 mm Turning length: 1,500 mm Swing over cross slide: 280 mm Spindle bore: 82 mm Spindle speeds: 20–3,000 rpm Feeds – longitudinal: 0–5,000 mm/min Feeds – cross: 0–5,000 mm/min Rapid traverse longitudinal: 5 m/min Rapid traverse cross: 5 m/min Travel – Z: 1,435 mm Travel – X: 295 mm Quill stroke: 150 mm Bed width: 350 mm Nwjdjwviucepfx Abuob MACHINE DETAILS Machine weight: approx. 3 t Space requirement: approx. 3.23 x 1.47 x 1.73 m Main motor: 7.5 kW

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Cobra je ekskluzivna visokotlačna dvostruka membranska pumpa, prikladna za Airless i AirCoat primjene do 250 bara. Cobra je prva visokotlačna pneumatska pumpa bez brtvila. Izostanak kontakta između materijala i vanjske atmosfere (pumpa je potpuno zapečaćena), bez trenja u fluidnom dijelu i minimalno smicanje čine ovu pumpu savršenom za sve vrste materijala, uključujući i najzahtjevnije, poput reaktivnih boja (UV boje, izocijanati, akrili) ili visoko abrazivnih materijala. Pumpa radi s iznimno niskim pulsiranjem i stvara ujednačen protok boje, osiguravajući savršen oblik raspršivanja i izvrsnu kvalitetu površine. Sa smanjenom unutarnjom zapreminom, pumpa je dizajnirana za znatno smanjenje potrošnje otapala i otpada materijala tijekom ispiranja i promjene boje. Cobra 40-10 je idealno rješenje za rad s manjim količinama materijala i učestale promjene boja – preporučuje se za aplikacije s jednim do tri pištolja u drvnoj i namještajskoj industriji, manjim stolarskim radionicama i bravarskim radionicama, te općenito u metalnoj industriji. Cobra® 40-10 također je idealna za doziranje baze ili učvršćivača kod 2K mješalica (FlexControl i FlexControl Plus). Wagner membranska pumpa OMJER PRITISKA: 40 :1 MAKSIMALNI TLAK MATERIJALA NA ULAZU U PUMPU: 20 bara DOVOD MATERIJALA: M-M 36x2 IZLAZ MATERIJALA: M-G 3/8’’ TEMPERATURA MATERIJALA: 10 - 80 °C ULAZNI TLAK ZRAKA: 2,5 - 6,0 bara Nwjdpoqzx Nksfx Abueb PRIKLJUČAK ZA ULAZ ZRAKA: F-G ½’’ RADNI TLAK: 250 bara MAKSIMALNA FREKVENCIJA UDARA: 200 DS/min VOLUMETRIJSKI PROTOK PO DVOSTRUKOM UDARU: 10 cm3/DS TEMPERATURA OKOLINE: 10 - 60 °C TEŽINA: 19,0 kg MAKSIMALNA RAZINA BUKE: 74 dB(A) RADNI RASAPON PH: 3,5 - 9,0 pH PUMPA SE ISPORUČUJE U KOMPLETU S CRIJEVOM I PIŠTOLJEM GM4700AC.

Kondisi: diremajakan ulang (bekas), “Wagner 451-130/160-600” for Sale With new transformer from 380 V AC to 220 V DC. Manufacturer: Wagner Model: 451-130/160-600 Power: 10.9/7.2 kW Nwsdpeglvwgjfx Abujb Current: 49.3/32.5 A Voltage: 220 V DC Magnet L x W: 1,600 x 1,300 mm Rubber belt: 1,400 mm Overall width: 2,530 mm

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine WAGNER FCU-1100 is a milling machine characterized by its robust construction and its worn green color. It is equipped with a modern digital control panel, a metal worktable with T-slots for securing components, and other visible mechanical components. Table dimensions: 460x1440mm Spindle nose: ISA40 RPM: 8-1200 Machine equipped with: Nedpferidyrjx Abujwb - HURON type head - Lighting - Lubrication pump - Feeds on 3 axes - 3-axis digital readout - Machine vise - Anti-vibration mount

Kondisi: baik (bekas), Tahun pembuatan: 1990, nomor mesin/kendaraan: 90650664, 24402 Technical Data: - Drilling capacity in steel: 50 mm - Spindle taper: MT 5 - Spindle travel: 315 mm Nwedpfeuzvzxox Abujb - Arm reach, min / max: 350 / 1600 mm - Column diameter: 350 mm - Max. / min. distance spindle – base plate: 350 - 1250 mm - Vertical stroke of arm: 580 mm - 16 spindle speeds: 25 – 2000 rpm - Feeds: 0.04 – 3.2 mm/rev - Drilling spindle drive: 400 V / 4 kW - Lifting drive: 1.5 kW - Column clamping: 0.75 kW - Box table - Coolant device - Required space approx.: W 2490 x H 2645 x D 1060 mm - Weight approx.: 3500 kg

Kondisi: bekas, berat muatan maksimum: 6.020 kg, berat keseluruhan: 10.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 01/2019, panjang ruang muatan: 7.200 mm, lebar ruang muat: 2.500 mm, tinggi ruang muatan: 400 mm, Tahun pembuatan: 2019, Perlengkapan: ABS,

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000. Documentation is available. Nwedpfxottv Uae Abuob

Kondisi: siap digunakan (bekas), An IFE magnetic separator fitted with a Wagner magnet is available. Magnet type: FE0446-30/55; magnet weight: approx. 78 kg. On-site inspection is possible. Nedpov Dwi Esfx Abujwb

Tahun pembuatan: 1988, Kondisi: siap digunakan (bekas), Kapasitas bor: 35 mm, Dudukan spindel bor: MK4, Gerak pinol: 285 mm, Jangkauan: 300 mm–1000 mm, Kecepatan: 2500 rpm, Lengan: 500 mm, Jarak spindel ke pelat dasar: 1000 mm, Dimensi pelat dasar X/Y: 1150 mm/780 mm. Peninjauan di lokasi memungkinkan. Nodpfx Abew Nq Sujujwb

Tahun pembuatan: 1988, Kondisi: siap digunakan (bekas), Tersedia dua mesin Erosi Listrik (EDM) DM-323. Jumlah jam operasi mesin 1/2: 12.134,51 / 32.704,5 jam. Manual operasi dan diagram kelistrikan tersedia. Pemeriksaan di lokasi dimungkinkan. Nwjdpfow Tc R Djx Abusb

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Travel distances X/Y/Z: 3200mm/1100mm/900mm, max. workpiece weight: 5000kg, table dimensions X/Y/Z: 3250mm/1220mm/1030mm. Spindle power: 45kW, speed: 6000rpm, tool holder: SK50, tool diameter: 125mm, tool length: 300mm, max. tool weight: 15kg, NC rotary table dimensions X/Y: 800mm/800mm. Machine dimensions X/Y: approx. 7800mm/4700mm, weight: approx. 25000kg, control: Siemens Sinumerik 810D Shopmill, operating hours: approx. 32000h, spindle hours: approx. 18000h. Including chip conveyor and internal coolant supply (IKZ). Documentation available. On-site inspection possible. Nwsdpfev Hrg Djx Abueb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Panjang penggerindaan: 1000 mm, tinggi penggerindaan: 370 mm, dimensi pelat magnetik X/Y: 1000 mm / 400 mm, dimensi batu gerinda X/Y/Z: 355 mm / 30 mm / 127 mm, kecepatan putar: 1750 rpm, dimensi mesin X/Y/Z: sekitar 4000 mm / 1750 mm / 1950 mm, berat: sekitar 3500 kg, kontrol: Chevalier. Dokumentasi tersedia. Inspeksi di lokasi dimungkinkan. Nodpfsw Ni Nlex Abuswb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1988, An older Wagner bagging unit for non-lumpy bulk materials, including an automatic scale, is available. On-site inspection is possible. Nwodpfx Abown H Ukeujb

Kondisi: bekas, Tahun pembuatan: 2024, Here you will find information about our powder coating and wet painting line, which we installed last year in the Izmir Free Trade Zone. The facility is used for bicycle coating. The dimensions are 680 × 680 × 2100 mm (L × W × H). System contents: 1. 5-stage washing unit, 2-stage plate heat exchanger, and heated 316 stainless steel sheet 1.1. Water drying tunnel with reversing function, 135 m 1.2. Control panel 1.3. Medium-size overhead conveyor Nodpfxexa Expj Abujwb 2.1. Label oven and conveyor belt, 75 m 2.2. Labeling area with air-conditioned roof and conveyor belt 3.1. Powder coating line, 135 m 3.2. Powder coating oven with 2 reversing functions 3.3. Powder coating booths do not belong to us, 2 Wagner powder coating booths 3.4. Medium-size overhead conveyor 4.1. Wet paint application line 4.2. Powder curing oven 4.3. Wet paint oven 4.4. Ventilation 4.5. 4 wet paint booths 4.6. 2 air-conditioned mixing rooms 4.7. 290 m conveyor belt 5.1. Label application line 90 m 5.2. Air-conditioned room in the roof area The original price of the system was €2,800,000.00. This is a fully automatic powder and wet painting line. It is also possible to purchase components separately. If you are interested, please do not hesitate to contact us.

Kondisi: bekas, Tahun pembuatan: 1995, warna: hijau, berat keseluruhan: 12.000 kg, berat muatan maksimum: 7.550 kg, berat kosong: 4.450 kg, volume ruang muat: 26 m³, lebar ruang muat: 2.200 mm, panjang ruang muatan: 5.600 mm, tinggi ruang muatan: 2.150 mm, jarak tempuh: 1.001 km, pendaftaran pertama: 01/1995, tipe perpindahan gigi: lain, kabin pengemudi: lain,