Beli Weber Cr 7 bekas (102)

Kondisi: bekas, jarak tempuh: 1.001 km, daya: 2 kW (2,72 hp), tipe perpindahan gigi: lain, jenis bahan bakar: bensin, warna: biru, berat kosong: 62 kg, pendaftaran pertama: 01/2018, Tahun pembuatan: 2018, kabin pengemudi: lain,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, WEBEN / CEEVER wash tunnel with robotic handling, conveyor, and inspection system Manufacturer: WEBEN / CEEVER Application: Automated parts handling following upstream press (press not included), washing, drying, and quality control Description: This system is an automated solution for the removal and transfer of parts from an upstream press. Robots pick up the parts and feed them via a conveyor and transport system through an industrial wash tunnel (wet cleaning), and subsequently through an inspection/measuring system for quality assurance. The entire process chain is designed for continuous operation, integrating robotic handling, washing process, conveyor technology, and automatic quality assessment (OK/NOK). Technical Data – Wash Tunnel Year of manufacture: 2021 Kdjdoy Ein Uepfx Ac Her Cleaning process: water-based spray-spray method, air blow-off, hot air drying Max. workpiece dimensions: Length 1400 mm Max. workpiece dimensions: Depth 2000 mm Max. workpiece dimensions: Height 10 mm Max. workpiece weight: 12 kg System dimensions: Width 3000 mm System dimensions: Depth 35,500 mm System dimensions: Height 3400 mm Weight (empty): 20,000 kg Weight (operational): 27,000 kg Material in media contact: Stainless steel AISI 304 Wash tank volume: 4000 liters Wash tank heating: electric 80 kW Rinse tank volume: 2500 liters Rinse tank heating: electric 40 kW Washing pump: 2000 l/min, 6 bar, 30 kW Rinse pump: 900 l/min, 6 bar, 15 kW Filtration washing: bag filters, 4 pcs, 100 µm Drying: electric 48 kW Electric supply: 380–400 V / 50 Hz / 3 Ph + N Total connected load wash tunnel: 385 kW Compressed air automation: 6–8 bar, connection 1/4″ Compressed air blow-off: 6–8 bar, 4 connections, consumption approx. 30,000 Nm³/h, connection 1 1/4″ Technical Data – Robot, Conveyor, and Inspection System Control: Siemens PLC S7-1500 1517F Operating panel: Siemens TP1900 Comfort Robot: KUKA KR50 R2500 IONTEC with KRC4 (multiple robots in line) Conveyor technology: several conveyor sections / transport zones Max. conveyor speed: up to 24 m/min Inspection system: laser measurement system with automatic OK/NOK evaluation and sorting Location: EU

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, lebar total: 2.000 mm, tinggi total: 2.020 mm, panjang total: 3.800 mm, lebar kerja: 1.350 mm, lebar penggilingan: 1.350 mm, berat keseluruhan: 3.400 kg, tinggi kerja: 900 mm, jenis penyesuaian ketinggian: listrik, tegangan masuk: 400 V, masa garansi: 3 bulan, lebar lorong: 1.350 mm, ketebalan lembaran (maks.): 100 mm, tebal plat aluminium (maks.): 100 mm, ketebalan lembaran kuningan (maks.): 100 mm, ketebalan pelat tembaga (maks.): 100 mm, ketebalan pelat baja (maks.): 100 mm, Equipment 1 contact roller unit, Ø 210 mm, rubber-coated 40 Shore, grooved Drive 15 kW/87 Hz/29 A (11/19 kW motor) frequency-controlled / ECO-Drive, synchronized, with electric roller adjustment (SKF) and positioning, prepared for use with Scotch-Brite belts 1 sanding brush station with 3 vertical rotation units each equipped with 2 horizontal rotating brushes Tool: Grit 150, No. 068087 Drive 2.6 kW per unit Rotational speed of the units 30–150 rpm, frequency-controlled Brush cutting speed 5–20 m/sec, frequency-controlled With electric height adjustment and positioning Installed Options Automatic workpiece thickness setting (AWDM), automatic tool length correction, interior machine lighting (LED version), infinitely variable feed 0.5–10 m/min, conveyor belt cleaning brush, conveyor belt control, vacuum version transport table, vacuum pressure regulation with vacuum sensor Kdjdpfx Acjzav Dqs Hjr Touchscreen 9" Siemens TP900 Comfort Year of manufacture 2017 Weight [kg] 3400 kg Previous owners 1 Availability Short-term, by arrangement Optionally, matching ductwork and extraction system (complete CE) are available for the machine.

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, panjang total: 2.200 mm, lebar total: 1.300 mm, tinggi total: 1.800 mm, berat keseluruhan: 450 kg, tegangan masuk: 400 V, frekuensi input: 50 Hz, Skiving and strip cutting machine Brand: Weber, Model: ASL 560 Serial number: 110, Year of manufacture: 2006, Voltage: 400 V, 50 Hz, Power: 1.1 kW, Weight: 450 kg, Plastic conveyor belt, Kjdpfx Aev Abylec Hedr Belt width: (1x) 500 mm, (1x) 300 mm, 17 blades, blade spacing: 30 mm, Overall dimensions: 2200 mm x 1300 mm x 1800 mm. Includes additional parts and blades.

Kondisi: bekas, en Kedpfxjdzp S Re Ac Hsdr

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), WEBER 3-layer PVC foam core pipe extrusion line with: 2 WEBER DS 9.25 EXTRUDERS I Year of manufacture: 2004 WEBER DS 9.25 TWIN-SCREW EXTRUDER Year of manufacture: 2004 Application: PVC foam core pipe (three-layer) Only the extruders are being sold, without feedblock Kdjdpfx Aot Rcn Nsc Her The screws and barrels of both extruders are in very good condition The line is in excellent, fully operational condition The equipment is my property Sachal Extrusion Machines D-26345 Bockhorn-Grabstede Germany

Kondisi: sangat baik (bekas), Weber MCS 902, CCA | Slicing Line – Slicer, Checkweigher, Outfeed Conveyor Slicer Brand: Weber Model: MCS 902 Serial number: 1312 Power supply: 400 V / 50 Hz Power: 10 kW Dimensions: 2900 mm x 1400 mm x 2380 mm Checkweigher: Conveyor type: Plastic mesh belt Belt width: 360 mm Dimensions: 610 mm x 400 mm x 1020 mm Outfeed Conveyor Brand: Weber Kdsdpfoy Hl Hvex Ac Her Model: CCA Serial number: 1312 Power supply: 400 V / 50 Hz Power: 7 kW Conveyor type: Plastic mesh belt Belt width: 295 mm Dimensions: 5350 mm x 1800 mm x 1700 mm The Weber MCS 902 industrial slicing line is a high-performance system designed for the precise slicing of cold cuts, cheese, and meat products. The MCS 902 slicer features advanced cutting technology that ensures consistent slice thickness and minimizes raw material waste. The integrated checkweigher provides real-time monitoring of portion weight, ensuring full control over production efficiency. The system is complemented by a CCA-type outfeed conveyor equipped with a hygienic mesh belt, allowing smooth transfer of sliced products for further packaging or processing stages.

Kondisi: bekas, Vibratory feeder with pneumatic screwdriver stand Eco Line Vibratory feeder, sorting unit, bowl feeder, vibrating bowl, automatic screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of construction: 2003 Vibratory feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting rail width: 10 mm Power supply: 230 Volt, 50 Hz. Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for stepless vibration speed = stepless conveying speed - Vibrating bowl enclosed in protective housing Kodpfx Asxf Up Usc Hodr - With pneumatic feed system - Feed impulse triggered by external electrical control - The feeder was used to feed M5 x 12 mm screws - Some pneumatic hoses need to be replaced - PLC control Siemens S7-200 CPU 224 MISSING Required space vibrating bowl (L x W x H): 450 x 450 x 315 mm Weight vibrating bowl: 32 kg Screwdriver stand WEBER Eco Line Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Main stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, type probably DZF-32-30-P-A-SM - Screwdriver traverse on linear guide - 3 position sensors on the cylinders - Pressure switch Festo - Pneumatic valve Bosch Dimensions screwdriver stand (W x D x H): 200 x 410 x 1050 mm Weight screwdriver stand: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see photo of electrical cabinet without PLC control), thus automatic operation is not possible in the current condition. The controller also managed the screw singulation process and the screwdriver itself. The vibrating bowl is fully functional even without PLC control; the built-in bowl controller does not require PLC signal. Process: Fasteners are filled into the bowl as bulk material and are moved upwards by the mechanical vibration of the bowl (micro-throw principle). The vibrating bowl automatically switches on or off depending on the fill level in the screw magazine. The screws are then pneumatically conveyed via a plastic hose to the downstream unit. The feed impulse for each individual screw is triggered externally by the downstream unit.

Tahun pembuatan: 2018, Kondisi: baru, Load capacity: max. 1,000 kg. Coil inner diameter: min. 400 mm Kdodpfxjdx Ryye Ac Hor Coil outer diameter: max. 1,100 mm Coil height: max. 800 mm

Kondisi: baik (bekas), Tahun pembuatan: 1990, Load capacity: 2,000 kg Ksdpsid Sgmofx Ac Hjdr Turntable diameter: 1,400 mm Coil outer diameter: max. 1,300 mm Coil inner diameter: min. 400 mm Coil height: max. 800 mm

Kondisi: bekas, Tahun pembuatan: 2016, Parts of a screwdriving station. This station was only operated in trial mode. It consists of 2 screwdriving units that were mounted on a robot gripper. The system was used for screwing battery components. Year of manufacture: 2016, the system was stored in recent years and then sold by Audi. The screws processed are approx. 72 mm long, thread size M6. Rexroth parts (installed twice each): 0 608 720 039; gear ratio i = 6.74; efficiency w = 85% 0 608 820 113; type: 3DMC060; 60 Nm 0 608 701 017; max. 20,000 rpm; 3~ 0-230V, max. 14A; 0.11 Nm/A 0 608 810 021 Kdodpfx Acswh Nu Tj Hsr 0608 810 037; type 3ULG; gear ratio i = 1; efficiency 95% Weber: 1x ZEL 360 feeder 1x control unit as shown All parts as shown in the pictures. Inspection is recommended, as it is unclear whether the system is complete.

Tahun pembuatan: 2018, Kondisi: hampir baru (bekas), Weber Schrau­b­system: Kdodpfxeif Rvas Ac Hor - Schrauben­bunker mit Ausricht- und Zuführsystem - Dosiersystem - Pneumatisches Zuführsystem - Schrauber - Festo Pneumatik-Schraubführungseinheit - Frequenzregler 4 komplette, kaum gebrauchte Systeme zu verkaufen. Preis pro Set / verhandelbar. Die Schrauberköpfe sind austauschbar und können an verschiedene Schraubentypen angepasst werden. Für weitere Informationen kontaktieren Sie uns bitte.

Kondisi: bekas, Tahun pembuatan: 1990, Mesin pengamplasan pita lebar Weber bekas, dilengkapi dengan 2 buah pita pengamplas, Kedpfxswzlqkj Ac Hsdr bergetar. Kecepatan pengumpanan dapat diatur secara bertahap. Lebar pengamplasan 900 mm. Sebagai mesin pengganti.

Tahun pembuatan: 2007, Kondisi: perlu perbaikan (bekas), Weber TRC 86 trench roller, year of manufacture 2007, 711 operating hours, weight 1,390 kg, Lombardini diesel engine 19.5 kW, serial no. 7000003. Roller runs and vibrates; right brake does not release. Ksdoiffk Tspfx Ac Hjdr

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Skinner / Mesin Pengupas Kulit / Mesin Penghilang Kulit Weber Tipe ASB 400 untuk operasi manual dengan meja kerja & operasi otomatis penuh dengan sabuk pengumpan, seluruhnya berbahan baja tahan karat. Seperti baru! Kdedpfxeyzb Hze Ac Her

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Single-screw extruder WEBER NE5 1-30:D with 2 WEBER ZE30 co-extruders Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Kedpfx Acjhy Tp Dj Hodr Application: Suitable for PE, PP, or three-layer pipe production, or for sheathing pipes with strip application The line was used for manufacturing heating pipes Condition: Very good 2 units WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe line is my property Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn/Grabstede, Germany

Tahun pembuatan: 1979, jam operasional: 216 h, Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Parallel twin-screw extruder Manufacturer: Hans Weber Maschinenfabrik GmbH Model: DS 85 Year of manufacture: 1979/2022 Machine No.: 85-399 Screw geometry: for rigid PVC profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10,000 Nm Motor power: 3.3 – 25.0 kW Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Die heating zones: 8 Temperature control: 12 x digital temperature controllers KS 40 (PMA) Accessories: Melt pressure sensor and melt temperature probe Connected load: approx. 60 kW (without tooling) Extrusion height: 1000 or 1100 mm Ksdeyx Dw Dopfx Ac Hodr Output capacity: approx. 150 – 180 kg/h for rigid PVC profiles Accessories: Material hopper and connection fan Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), including material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder is freshly painted (light grey RAL 7035) and function tested.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: bensin, berat keseluruhan: 32 kg, Tersertifikasi DGUV hingga: 03/2026, Tahun pembuatan: 2018, nomor mesin/kendaraan: 20008074, Perlengkapan: Pemeriksaan keselamatan UVV, Khusus untuk pemadatan sambungan pipa di parit; area penggunaan lain: pemadatan area tepi pada trotoar; pemasangan drainase. Karena bobotnya yang ringan, alat ini mudah, fleksibel, dan aman dioperasikan bahkan di kemiringan dan ruang yang sangat sempit. Kdsdexpu Tbopfx Ac Hsr

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, jam operasional: 87.618 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: DS 85610, berat keseluruhan: 4.000 kg, panjang total: 5.200 mm, lebar total: 1.700 mm, tinggi total: 2.500 mm, daya: 75 kW (101,97 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, arus masuk: 160 A, Extruder WEBER 8.8 asli dengan laras yang diperpanjang menjadi model 8.22. Dengan sekrup baru dan orisinal dari Weber. Panel kontrol HMI, pernah digunakan di lingkungan ruang bersih. Dilengkapi dengan hopper. Kdodpfx Acsx Apckj Her Mesin dijual dalam kondisi apa adanya.

Kondisi: baik (bekas), Tahun pembuatan: 1994, Model: NE 12 Tipe Sekrup: Sekrup tunggal Tahun pembuatan: 1994 Diameter sekrup: 130 mm Kdjdpfx Asyxpbusc Her Rasio L/D: 30 L/D Daya penggerak: 350 kW Termasuk: • Mesin masih beroperasi saat dibongkar • Mesin memproduksi pipa 710 mm • Output pada HDPE sekitar 1.000 kg/jam • Kepala ekstrusi 800 mm

Kondisi: baik (bekas), WEBER pipe extrusion line including: Kjdpevryhysfx Ac Hedr WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Tahun pembuatan: 1983, Kondisi: baik (bekas), This WEBER extruder is located at Plastima Used Machinery in the machine warehouse. The machine dates from 1983 and is in excellent condition. – Brand: Hans Weber GmbH – Model: ZE 30 Ksdpfx Asq Tr Tboc Hedr – Year of manufacture: 1983 – Single-screw extruder – Screw diameter: 30 mm – Ratio: 20 L/D

Kondisi: baik (bekas), Tahun pembuatan: 1989, nomor mesin/kendaraan: NE 60 053, Merek: Hans Weber Tipe: NE 60 Kdedpfeylv A Rex Ac Hor Nomor seri: NE 60 053 Tahun pembuatan: 1989

Tahun pembuatan: 1991, jam operasional: 102.364 h, Kondisi: baik (bekas), This extrusion line from Hans Weber GmbH is currently stored at Plastima Used Machinery. The line dates from 1991 and is in used but good condition. – Manufacturer: Hans Weber GmbH – Model: WEBER DS 6.5 Kodsqpft Iepfx Ac Hsdr – Year of manufacture: 1991 – Screw diameter: 65 mm – Operating hours: 2,364

Kondisi: sangat baik (bekas), 1 x Weber slicer 902 Bulk Slicer. Mampu memotong 6 bagian per menit dengan ketebalan 4-5 mm. Ketebalan irisan dapat diatur tanpa batas dan diatur melalui layar sentuh. Kjdpfxjyx D Rde Ac Hjdr