Beli Weeke Bhp 210 bekas (72)

Kondisi: sangat baik (bekas), CNC flexible automatic through-feed drilling machine (gantry machine) with dowel insertion system Moving panel (workpiece), moving working head (horizontal panel-workpiece) Control: PowerControl, Software: WoodWOP Integrated machine safety enclosure Workpiece drive via 3 conveyor belts Feed speed (m/min): approx. 1 - 90 Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X - Y - Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Gsdpfxod Nvi Do Aazeka Total connected load (kW): 38 WORKING UNITS (TOP): Drilling unit with vertical spindles (qty.): 1 Independent vertical drilling spindles (qty.): 38 + 3 special Independent horizontal drilling spindles (qty.): 6 Grooving saw unit (for machining in X-axis), blade diameter (mm): 100 Vertical main spindle (milling unit), qty.: 1 x SK 30 (vertical main spindle power: 6 kW) Automatic tool change system, disc tool changer, qty.: 3 tool positions WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles (qty.): 2 Horizontal drilling spindles – right side (qty.): 13 + left side (qty.): 13 Injection nozzles for glue application and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (qty.): 1

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Gsdpogwbbqjfx Aazjka Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, CNC flexible gantry machine Horizontal throughfeed panel Control: Power Control Open powerTouch, software: WoodWOP (TAPIO-ready) Infeed table (panel support) + outfeed table (panel support) Panel feed by 3 conveyor belts Min. workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Gkedpfx Asx Aqi Eeazea Max. workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Special side guide system for workpieces with 'sensitive' edges 3 upper vertical pressure devices Powered conveyor belt for waste removal Integrated electrical and control cabinet Total installed power (kW): approx. 47 OPTIONAL: WIRELESS BARCODE SCANNER 2 WORKING UNITS (TOP): (SERVO MOTOR for X-Y-Z axes): 4 drilling supports V15 (4 x 2.3 kW), each with 15 vertical spindles (total: 60 upper spindles) 3 WORKING UNITS (BOTTOM): (SERVO MOTOR for X-Y-Z axes): 6 drilling supports V32 (6 x 2.3 kW), each with 32 vertical spindles (total: 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 drilling supports H21 (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Gedpfx Aash Ryhnszeka Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Upper vertical drilling supports (number): 2 Spindles per drilling unit on upper support (number): 2 Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: diremajakan ulang (bekas), PC control Power Control Software No. 2 infeed motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Max. working width (mm): 3000 Min. working width (mm): 250 No. 6 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Gkjdpfx Aaevhcbzszja No. 11 spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital position display for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor Total connected load (kW): approx. 50 / 60

Kondisi: sangat baik (bekas), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) Gkedpfoivawpsx Aazja No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor Total connected load (kW): 20

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Zum Verkauf steht ein vertikales CNC-Bearbeitungszentrum Weeke Optimat BHX 500, Baujahr 2007, konzipiert für das Bohren, Fräsen und Nuten von Plattenwerkstoffen in der Möbelindustrie. Die Maschine ermöglicht eine schnelle und präzise Bearbeitung von Werkstücken und ist sowohl für die Serienfertigung als auch für die Einzelanfertigung von Möbeln geeignet. Technische Daten: Modell: Weeke Optimat BHX 500 Baujahr: 2007 Maschinentyp: 3-Achs CNC-Durchlauf-Bearbeitungszentrum CNC-Steuerung: WoodWOP (Homag / Weeke) Maximale Werkstücklänge: ca. 3050 mm Maximale Werkstückbreite: ca. 1200 mm Maximale Werkstückdicke: 80 mm Minimale Werkstücklänge: ca. 200 mm Minimale Werkstückbreite: ca. 70 mm Ausstattung: Bohrkopf mit mehreren vertikalen und horizontalen Spindeln 96 Bohrspindeln (48 oben, 48 unten) 36 Vertikalwerkzeuge 12 Horizontalwerkzeuge Nutsäge Fräser (oben und unten) 125 mm Säge, um 90° schwenkbar Automatischer Werkstücktransport mit Spannvorrichtung Anwendungen: Bohren für Dübel und Beschläge Fräsen und Nuten Bearbeitung von Spanplatte, MDF, HDF, Sperrholz und Massivholz Vorteile: Bearbeitung von zwei Werkstücken gleichzeitig möglich, wodurch die Produktivität deutlich gesteigert wird Schnelle Umrüstung und Werkstückwechsel Hohe Präzision beim Bohren und Fräsen Ideal für die Herstellung von Korpusmöbeln, Küchen, Schränken und Innenausbau Gedeywgb Nopfx Aazska Zustand: Maschine ist regelmäßig gewartet und betriebsbereit Probelauf bei Besichtigung möglich Lieferung: Juni 2026

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, nomor mesin/kendaraan: 0-250-05-2654, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.950 mm, jarak lintasan sumbu Y: 1.943 mm, jarak gerak sumbu Z: 400 mm, model controller: HOMATIC-2000 IPC, No reserve price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel distances X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical drilling unit X-direction Drill spindles: 16 Feed stroke Z: 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counterclockwise Speed: 1,500 – 5,900 rpm Drive: 1.5 kW Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical drilling unit Y-direction Drill spindles: 15 Feed stroke Z: 60 mm Drive: 1.5 kW Gedpfx Asx Sqm Ssazska Rotation direction: clockwise/counterclockwise Speed: 1,500 – 5,900 rpm Drill chuck: d = 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Arrangement: Y-direction Horizontal drilling unit X-direction Drill spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: counterclockwise Speed: 4,800 rpm Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal drilling unit Y-direction Drill spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: clockwise Speed: 4,800 rpm Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Milling motor Drive power: 7.5/10 kW (S1/S6-duty) Speed range (stepless): 750 – 18,000 rpm Cooling: liquid circulation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool changer magazine Magazine stations: 30 tool holders Tool weight: max. 5 kg Tool change time: approx. 8 – 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC Liquid circulation cooling: 18,000 l/min Power: 7.5 / 10 kW S1/S6 operation EQUIPMENT integrated CNC axis (360° rotary) torque support main spindle (motor output 7.5 / 10 kW, HSK F63) workpiece support system 1,500 mm workpiece console K-table 1,500 mm moving column extension Y-direction 120 mm compressed air connection rail with quick couplings extraction hood for additional router motor router 5 kW with hydro quick-clamp system safety guard left with door safety tread mat 3,250 mm control cabinet left Note: Further details regarding the equipment of the machine can be found in the attached documents.

Kondisi: sangat baik (bekas), Kontrol PC Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Konveyor bermotor tipe thru-feed No. 2 Dudukan bor horizontal (tampilan digital untuk data posisi sumbu) No. 1 Unit bor untuk setiap dudukan bor horizontal (1 x 1,5 kW) No. 21 Spindel untuk setiap unit bor horizontal Lebar kerja maks. (mm): 2500 Lebar kerja min. (mm): 250 No. 4 Dudukan bor vertikal bawah (tampilan digital untuk data posisi sumbu) No. 2 Unit bor untuk setiap dudukan bor vertikal bawah (2 x 1,5 kW) Gkedsyv Ev Aepfx Aazsa No. 4 Penjepit benda kerja vertikal atas Sabuk pembuang serbuk Daya total terpasang (kW): 35

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, WEEKE BHX 500 – Operator Side Right Weeke machining center with one machining support each on the top and bottom Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2500 mm Min. workpiece width: 70 mm Max. workpiece width: 1000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit, each located in the upper and lower machining support, with 21 drilling spindles each (individually addressable with variable speed range). Gkedpfx Aox S Hzleazja 2H4X/1Y Horizontal drilling unit arranged in the upper and lower machining support, each with 10 drill spindles individually selectable via the control software: 8 spindles each in the X-direction 2 spindles each in the Y-direction N2 X-Y 90° Grooving saw unit, each located in the upper and lower machining support for machining in the X-Y direction, swiveling 90°. Cutting depth: 30 mm SUPPLEMENT FOR GROOVING SAW BLADE Saw blade width may be 8.4 mm. The chip removal cross-section must not exceed 70mm². F2-ETP-6 KW Milling unit, each located in the upper and lower machining support, suitable for use with shank tools. Manual tool change. Tool clamping: manual hydro quick-release system ETP 25 Rotation direction: clockwise/counterclockwise Spindle speed: 6,000 – 18,000 rpm, infinitely programmable Processing up to 3000 mm Infeed table with automatic workpiece feeding and positioning Workpiece removal area with cross-belt conveyor and lifting arms – Workpiece length measuring system integrated in the machine – Movable operator terminal – Barcode software incl. scanner

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Gedpfxexdl Rao Aazeka Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: Max. length 600 mm Configuration: - Horizontal drilling unit with 3 individually selectable spindles, spindle spacing 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drill spindle) - Glue nozzle with adjustable glue dosage - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel supply 1. BASE MACHINE - Robust steel frame construction - Axis movement in X, Y, and Z directions - Ball screw drive (Y and Z axes) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side fences as well as rear fence rail - Pneumatically lowerable center stop, manually controlled via selector switch - 6 top hold-down cylinders, manually adjustable - Central lubrication Power control PC85T Modern control system based on Windows PC

Kondisi: sangat baik (bekas), COMPLETE 4-SIDE FORMAT PROCESSING AND EDGE-BANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X04004A) Feeding gantry (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 Gkodelikvhspfx Aazoa X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edge-banding machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st Drilling machine "WEEKE" Model BST 500 D X04004G) 2nd Drilling machine "WEEKE" Model BST 500 D X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004M) Stacking gantry (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, nomor mesin/kendaraan: 0-250-18-0294, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.900 mm, jarak lintasan sumbu Y: 1.350 mm, jarak gerak sumbu Z: 370 mm, panjang meja: 3.550 mm, lebar meja: 1.355 mm, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Dengan mengajukan penawaran, Anda wajib melakukan pengambilan tepat waktu hingga akhir minggu ke-45! DETAIL TEKNIS Perjalanan sumbu X: 3.900 mm Perjalanan sumbu Y: 1.350 mm Perjalanan sumbu Z: 370 mm Jumlah spindle milling: 1 Panjang meja: 3.550 mm Lebar meja: 1.355 mm Area kerja sumbu Z: 100 mm DETAIL MESIN Berat: 4.500 kg Daya: 22,0 kW PERLENGKAPAN Alat bor Dokumentasi Penandaan CE Gkodpfexgd Ezex Aazja

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 4.300 mm, kecepatan rotasi (maks.): 24.000 rpm, Perlengkapan: Penandaan CE, TECHNICAL DETAILS X-axis travel: 2,500 mm Y-axis travel: 4,300 mm Maximum workpiece clearance: 60 mm Spindle speed unit 1: 24,000 rpm Spindle speed unit 2: 24,000 rpm Spindle speed unit 3: 24,000 rpm Number of controlled axes spindle unit 1: 4 Gksdjxw Ugdspfx Aazoa Number of controlled axes spindle unit 2: 3 Number of controlled axes spindle unit 3: 3 MACHINE DETAILS Number of working zones: 2 Number of grippers: 9+4 Spindle motor rating unit 1: 12 kW Spindle motor rating unit 2: 12 kW Spindle motor rating unit 3: 12 kW Tool magazine 1: 14 positions, mounted at the side of the machine Tool magazine 2: 14 positions, mounted at the side of the machine EQUIPMENT Grippers for holding processed workpieces Automatic panel loading system Motorized transfer Automatic tool changer Barcode label printer CE marking Safety guards attached to the machine Note: Tools and the automatic wood chip removal system are not included with the offer.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.700 mm, jarak lintasan sumbu Y: 1.550 mm, kecepatan pemakanan sumbu X: 96 m/menit, laju pemakanan gandar Y: 96 m/menit, kecepatan rotasi (maks.): 24.000 rpm, 1 Gksdpfxexw Up Ss Aazoa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Mesin dalam kondisi sangat baik dan saat ini digunakan dalam produksi harian (sekitar 2–3 jam per hari). Mesin digantikan dengan mesin yang lebih baru dan lebih besar karena kebutuhan kapasitas produksi yang meningkat. Mesin tersedia segera. Spesifikasi teknis dan data rinci ditampilkan pada foto terlampir. Pengiriman ke seluruh dunia dapat diatur atas permintaan pelanggan. Godpfx Aoym Tc Rsazska

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, HOMAG WEEKE OPTIMAT ABD 150 adalah mesin CNC berkinerja tinggi yang dirancang untuk pengeboran presisi, pemasangan dowel, dan pemasangan hardware dalam produksi furnitur serta pengolahan panel. Gsdpfxjym Nvts Aazjka Mesin ini ideal untuk pembuat lemari, produsen furnitur, dan operasi woodworking industri yang memerlukan pemrosesan otomatis yang akurat dan efisien. Fitur mesin meliputi: Unit pengeboran dan pemasangan yang dikendalikan CNC Sistem integrasi lem dan pemasangan dowel Konstruksi industri yang kokoh Desain kompak Panel kontrol yang mudah digunakan Sertifikasi CE Mesin telah dirawat secara berkala dan siap digunakan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.035 mm, jarak lintasan sumbu Y: 1.720 mm, jarak gerak sumbu Z: 380 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, Kami menawarkan pusat pemesinan Weeke Optimat BHC 550 siap pakai tahun pembuatan 2003 ini. Gkjdpfxjx Nw Dro Aazsa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, TECHNICAL DETAILS Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm - max. 80 mm Workpiece stacking: max. 2 pieces Vertical Drilling Unit 2V21 HIGH SPEED 7500 Feed stroke (Z-axis): 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counter-clockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Gedoyg E R Hspfx Aazjka Total drill length: 70 mm Max. drill diameter: 35 mm Spindle distance: 32 mm Spindle type: individually controllable Horizontal Drilling Unit 2H4X/1Y 4 drilling spindles each: X-axis each 1 drilling spindle: Y-axis Drilling depth: max. 38 mm Drilling height (Z-axis): 38 mm from workpiece top edge Rotation direction: clockwise/counter-clockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 20 mm Spindle type: individually controllable Grooving Saw Unit N2 X-Y 90° Cutting depth: 30 mm Machining cross-section: max. 70 mm² Speed: 1,500 - 7,500 rpm, frequency controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling Unit F2-ETP-6 kW Tool holder: for shank diameter d = 25 mm Max. tool diameter: 60 mm Clamping length: min. 65 mm / max. 95 mm Tool weight: max. 2.5 kg Tool change: manual, hydro quick-release system ETP 25 Rotation direction: clockwise/counter-clockwise Speed: 6,000 - 18,000 rpm, steplessly programmable Drive: frequency-controlled three-phase motor Max. power at tool: up to 5/6 kW in continuous/intermittent operation (S1/S6-50%) EQUIPMENT Material feed “IgeL-ROBOT” Bottom processing support Top processing support Vertical drilling unit 2 V 21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90 Milling unit F2-ETP-6 KW Barcode reader, manufacturer: Datalogic

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, model controller: POWER PC 85 + WOODWOP 6.0, lebar kerja: 850 mm, tinggi kerja: 60 mm, panjang kerja: 3.050 mm, DETAIL TEKNIS Dimensi kerja: 3.050 x 850 mm Tinggi kerja: 12 - 60 mm Kepala bor Spindel vertikal sumbu X: 8 Spindel vertikal sumbu Y: 5 Spindel horizontal sumbu X: 4 Spindel horizontal sumbu Y: 2 Kepala frais Sumbu: 3 Penggantian alat: Otomatis Diameter unit gergaji terintegrasi: 100 mm DETAIL MESIN Gedpfoydmcrox Aazska Kontrol: POWER PC 85 + WOODWOP 6.0 (diperbarui pada 2023) PERLENGKAPAN Penggantian alat 4 posisi otomatis

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, nomor mesin/kendaraan: 0-250-12-2554, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 1.000 mm, lebar benda kerja (maks.): 3.000 mm, tinggi benda kerja (maks.): 80 mm, model controller: PC 85, technical-details-001 Gkodpfjydnu Nsx Aazoa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 0-250-15-0310, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.250 mm, jarak lintasan sumbu Y: 1.300 mm, jumlah slot dalam magazin alat: 9, gerak cepat sumbu X: 80 m/menit, diameter benda kerja (maks.): 60 mm, tech-specs-tr-001 Gkedpfx Asxdw Tgsazja