Beli Weiler Dz 65 bekas (180)

Kondisi: bekas, Swing diameter over bed / mm Swing diameter over cross slide / mm Turning length / mm Bcsdpfx Afowgi Tme Seu

Kondisi: baik (bekas), Tahun pembuatan: 2000, 10623 Bodpsyagiwjfx Af Secu

Kondisi: bekas, 1 Bedpfx Afoyah Rve Sscu

Kondisi: bekas, Diameter pembubutan di atas tempat tidur 370 mm Diameter pembubutan di atas suport 200 mm Panjang pembubutan 1000 mm Ketinggian center 185 mm Lubang spindle 56 mm Kepala lepas tipe MK 4 Putaran spindle 50 - 2000 rpm Daya penggerak 4,0 kW Berat mesin sekitar 1,4 t Kebutuhan ruang sekitar 2,3 x 1,1 x 1,3 m Mesin bubut dengan lead screw dan feed shaft Chuck tiga rahang 200 mm Pemegang pahat Multifix ukuran B 3 pcs kaset Multifix Perangkat pemutus darurat Bedoxfwckjpfx Af Sjcu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, jam operasional: 51.392 h, tinggi total: 1.700 mm, berat keseluruhan: 1.300 kg, This Weiler E30 was manufactured in 1990. A robust centre lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of thread cutting operations, from metric to DP threads, and comes equipped with a Multifix toolpost size B. Ideally suited for precise and versatile turning tasks. Please contact us for further information about this machine. Additional Equipment • Multifix toolpost size B mounted • Fixed steady rest (optional), clamping range: 15–100 mm • Travelling steady rest (optional), clamping range: 10–85 mm • Collets from 3 mm (in 0.5 mm increments) • Tailstock with a MK3 sleeve Machine Advantages Technical Machine Advantages • Drive power 100% / 60% duty cycle: 9/11 kW • Maximum spindle torque: 180 Nm • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed motors • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10/7.5/5/3.5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Quill taper: MK 3 Additional Information Swing over cross slide: 160 mm Bed width: 240 mm Travel of cross slide: 180 mm Saddle slideway length: 395 mm Turning tool cross section (H x W): 20 x 20 mm Spindle nose according to DIN 55027, size 5 Spindle diameter at front bearing: 70 mm Bcjdpjyaimfjfx Af Sju Main spindle taper: MK 5 Workpiece: Metric thread range: 0.1 – 400 mm Inch thread range: G/1" 1/4 – 56 Module thread range: mm DP thread range: 1–224 G/" Maximum number of threads: 50 Dimensions Machine depth: 1800 mm

Kondisi: bekas, L + Z lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Bcedpjrtd Uwofx Af Ssu Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 exchangeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centering point for collet holder - Emergency stop - Folding chuck guard - Splash guard - Machine light - Electrical diagram - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Kondisi: siap digunakan (bekas), translator-2024-06-14-001 Bcsdpfsydp Ahjx Af Sou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, incl. Schunk chuck Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Bjdjx Ux I Nspfx Af Secu Tailstock taper: MK3 Quill stroke: 85 mm Capable thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg

Kondisi: bekas, en-001 Bcodpfx Afek S Ht Ae Sou

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1995, CNC TURNING MACHINE WEILER 'E 35' Equipped with 2-axis Siemens Sinumerik 805 Year of manufacture: 1995 Spindle bore: 54 mm Centre distance: 950 mm Swing over bed: 410 mm Speed range: 4 – 3000 rpm Including the following accessories: PARAT tool holder with 8 inserts Chuck guard 3-jaw chuck Ø 200 mm Bjdpfx Aeuzyw Djf Sscu 4-jaw chuck Ø 200 mm Fixed steady rest 12 – 150 mm Chip collection tray Chip splash guard with lighting Coolant system 4 height-adjustable machine feet Operating manual

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 140 mm, lubang spindel: 36 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 42 rpm, tinggi total: 1.600 mm, panjang total: 1.800 mm, lebar total: 700 mm, Motor 3 fasa 380V, 2 kecepatan, berjalan dengan baik. Headstock roda gigi, roda gigi beroperasi dalam oli! 16 kecepatan spindle yang dapat diatur, mulai dari 42 hingga 2000 RPM. Makan daya otomatis pada kedua arah melintang. Tersedia pemotongan ulir. Heidenhain DRO 2 sumbu (digital read out). Toolpost Tripo A tipe quick change. Bcodpjyditaefx Af Sju Chuck Röhm 3 jaws 160mm. Tailstock MT3. Dibuat di Jerman. Jarak antara senter: 850mm Tinggi senter: 140mm Lubang spindle: 36mm Dimensi keseluruhan: 180x70x160cm Sudah termasuk semua aksesoris sesuai gambar. Hubungi kami untuk kemungkinan pengiriman! € 4.250,00

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Länge:1200mm Breite:800mm Höhe:1200mm Bcedpfx Afox Tp Dxs Sou Gewicht:290kg

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg Bedpovrcqdofx Af Secu >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew Bjdpfovrckqox Af Secu About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Shaft Bench Lathe in Excellent Condition!!! Technical Data: >> Machine No. 2801 >> Centre Height: 120 mm >> Centre Distance: 430 mm >> Speed Range: 60 – 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting options: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Bcodpfx Afsv Tyzcs Sju Accessories and Equipment: >> 1 piece Röhm 3-jaw chuck 125 mm with 4 sets of jaws >> Collet clamping device with collets from 2 mm to 12 mm in 1 mm increments with draw tube >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady >> Faceplate >> Spindle guard >> Clamping tools About the Machine: For sale is a Weiler Primus lead and feed shaft bench lathe in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a government-operated facility where it saw little use. This newer generation of Weiler lathes is very operator-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself. (The base cabinet is included; it is not bolted to the machine.) Digital readout available at extra cost.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: 0.010 to 1.184 mm/rev >> Possible thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck with 32 collets (set is incomplete) with adapter >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Multifix tool post size A with 2 tool holders >> Change gears >> Bed stop Bodpfjvv Etvjx Af Sjcu About the Machine: Offered here is a used Weiler Matador VS-2 in full working condition. Take the opportunity to inspect and test the machine under power on site to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C - NEW Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Bcjdpovambcsfx Af Sou Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter selection, quick zeroing, counting direction selection >> Collet chuck system, new collets from 3 to 26 mm in 1 mm steps >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix quick-change toolpost, new, size A, with 2 new tool holders >> Bed stop >> Electric chuck guard, new >> Machine lamp, LED, new >> Rear splash guard >> Operating manual >> Coolant device >> Machine levelling feet About the Machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, absolutely as-new condition. The guideways have been newly ground and hand-scraped. Acceptance as per inspection protocol. A very fine machine with electronic spindle guard. The accessories—collets, chuck, Multifix—are new. Spindles, nuts, bearings, belts, and wipers have been renewed. Take the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Overhauled, including acceptance protocol certifying new-machine tolerances. Technical Specifications: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Equipment & Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction >> New collet chuck, NEW collets 3–25 mm in 1 mm increments Bcsdpfx Afevrdlce Sou >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev Bcedpfx Afowrm Dte Sju >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B Leadscrew and Feed Shaft Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of manufacture: 1986 Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds (8 steps): from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake selectable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Features: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck, collets as new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop Bcsdpfx Ajwthbiof Sju >> Rear splash guard >> Machine feet >> Coolant system About the Machine: A Weiler Praktikant 160 B leadscrew and feed shaft lathe is being offered here, built to toolmaker’s precision and in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled and newly painted in light grey. All cross slides move very smoothly and evenly. The Weiler also runs smoothly at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view the machine under power on site and see the condition for yourself.

Kondisi: baru, Tahun pembuatan: 2025, CONDOR VC plus The new benchmark in conventional precision lathes. A high-quality, high-performance, and energy-efficient precision lathe designed for high-productivity applications in production and toolmaking, as well as for training and education purposes. Superior quality, energy efficiency, precision, and universal suitability for use in production, training, and further education. Key features include: - Future-oriented technology - Exceptional accuracy - Long service life - Operator-friendly ergonomics - Minimal space requirements - Comprehensive range of accessories The consistent and innovative advancement of the proven Condor series represents an economical and intelligent solution for your daily machining needs. Bedpfxjqwipno Af Socu Technical Specifications: WORKING AREA Centre height 180 mm Swing over bed 360 mm Swing over cross slide 190 mm Distance between centres 800 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 6 Spindle bore 57 mm Spindle diameter at front bearing 90 mm MAIN DRIVE Drive capacity at 60%/100% duty cycle – / 10.5 kW Speed range 25 – 4,000 rpm Number of speeds Infinitely variable FEED RANGE Number Infinitely variable Longitudinal 0.01 – 6 mm/rev Cross 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads 0.1 – 20 mm TAILSTOCK Quill diameter 50 mm Quill stroke 110 mm Quill taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus touchscreen display - Large, clearly arranged 15" touchscreen, rotatable and pivotable, 1366 x 768 resolution - Switching between operating screens via swipe gesture - Operating functions accessible through App Manager - Operating panels can be freely configured, placed, and scaled - Import of drawings/sketches from PDF files via USB interface, individually zoomable - Video-assisted maintenance support - Contextual help menu (instead of WEILER VC plus display) The machine is available immediately and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For further information regarding equipment options, please contact us.

Kondisi: bekas, Tahun pembuatan: 2000, gebrauchte-condor-ac-teilueberholt Bcedpfsx E Um Nex Af Seu

Kondisi: baru, Tahun pembuatan: 2025, Intern GSD One of the best-selling and most popular conventional precision lathes Distinguished by: sophisticated engineering highest precision long service life proven ergonomic design minimal footprint and extensive accessories. Proven over decades in single-part and small series production, in both craft and industrial settings, for training and professional development, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed rod protection Main spindle brake Toolroom accuracy according to DIN 8605 Two-speed brake motor Headstock gear transmission 16 fixed spindle speed levels Digital position display (optional) LED machine lamp TECHNICAL DATA: WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Centre distance: 650 mm LATHE SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60% / 100% DC: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speed steps: 16 FEED RANGE Number: 24 Longitudinal: 0.02 – 0.63 mm/rev Cross: 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads: 0.25 – 8* mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Taper according to DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Bedpowhzcpofx Af Socu * Inch and metric pitches 0.45; 0.75; 4.5 and 5.5 mm only possible with additional change gears. The machine is located in our showroom in 71334 Waiblingen-Beinstein and is immediately available. For equipment details, please contact us.

Kondisi: baru, Praktikant VC plus The new dimension in the field of conventional precision lathes. High-quality, energy-efficient, precise, and universally applicable for production, training, and further education. Its strengths include: forward-thinking technology maximum precision long service life operator-friendly ergonomics minimal space requirements and comprehensive accessories The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Bjdpfxohw N Nts Af Socu Technical Data: WORKING AREA Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Distance between centers: 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: stepless FEED RANGE Number: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Morse taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large and clear 15" touchscreen, rotatable and swiveling, resolution 1366 x 768 - Operation screens switched via swipe gestures - Operation functions accessible via app manager - Control fields can be freely configured, positioned, and scaled - Drawings/sketches in PDF format can be imported via USB and individually zoomed - Video-assisted machine maintenance - Context help menu (instead of the WEILER VC plus screen display) - Coolant system, 18 liters including coolant pump The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For equipment details, please contact us.

Kondisi: bekas, nomor mesin/kendaraan: 11756, Used lead and feed screw lathe WEILER LZ 280 Center height: 125 mm Distance between centers: 800 mm Spindle speeds: approx. 26-2000 rpm Includes: - 1 x 3-jaw chuck Ø 125 mm with inside and outside jaws, brand new - Multifix size A with 2 toolholders - Emergency stop/switch unit Bsdovd Dbnspfx Af Sscu - Rear chip guard plate - Complete set of change gears - Catch plate - Tray - Machine lamp - New socket outlet - 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube - Fixed center and MT2 sleeve for clamping tube - Bed stop - Chuck guard - Various turning tools and operating manual The machine is located at our premises in 71334 Waiblingen-Beinstein and is immediately available. An inspection of the machine can be arranged by appointment.