Beli Weiler Dz 65 bekas (181)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of Manufacture: 2021 Condition: Used, very good, as new; includes new service and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Kdedpfxex Ivy No Ag Rsi Top slide travel: 110 mm Top slide swiveling range: +/-65° Bed carriage guide length: 350 mm Bed width: 205 mm Tool shank cross-section (height x width): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle nose to ISO DIN 702-3 (DIN55027) Size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle internal taper: Metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gearbox stages: 1 Number of spindle speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / Rear panel / Sliding safety guard: Light Grey RAL 7035 Machine base / Bed: Basalt Grey RAL 7012 Digital display housing: Blue NCSS 4550-R80B

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 41.000 h, lubang spindel: 165 mm, panjang pembubutan: 3.000 mm, diameter pembubutan: 830 mm, diameter pembubutan di atas alas geser: 1.200 mm, gores kuas bulu: 400 mm, diameter quill: 140 mm, torsi: 8.000 Nm, Technical Data ----- Max. turning length: 3,000 mm Turning diameter: 830 mm Max. turning diameter over bed: 1,200 mm Bed width: 600 mm Spindle bore: 165 mm Spindle head: DIN 55027 size 15 Chuck: Forkardt 3KS 800 mm Speed range: 1 - 280 / 4 - 900 rpm Number of gear steps: 2 Torque: 8,000 Nm Number of turrets: 1 Sauter 4-position head turret for 140 mm holders Tailstock Kodpfxov Nhxzo Ag Rodi Quill diameter: 140 mm Quill stroke: 400 mm Equipment features ----- Electronic handwheel Hydraulic power chuck Forkardt 3KS 800 mm Chip conveyor

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout from K&C, from vocational school use Technical data: >> Year of manufacture: 1992 | Machine no.: 92 160 3271 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 - 2500 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock quill: MT 3 >> Feeds: 0.02 - 0.63 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral-Pitch threads possible Kdodpfx Asx H S D Iog Rei >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically actuated spindle brake >> Dimensions: Length 1.6 m | Height 1.25 m | Depth 0.7 m Equipment and accessories: >> 3-axis digital readout from K&C with manual Functions: mm/inch conversion, ABS/INC coordinate selection, display value halving, reference mark, tool data storage for 200 tools, taper calculation, radius/diameter function, quick zero, counting direction reversal >> Collet chuck system with NEW collets from 3 - 26 mm in 1 mm increments >> 160 mm three-jaw chuck (Kelistangen) with 1 set of jaws >> Quick-change toolpost system with 4 tool holders >> Bed stop >> Electronic spindle protection >> Rear splash guard >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe in toolmaker's accuracy, built in 1992, in very good condition. The machine is, of course, fully operational. All slides move very smoothly and evenly. The Weiler also runs smoothly at high speeds. This newer generation of Weiler lathes is very user-friendly and surface finishes comparable to grinding can be achieved. Take the opportunity to inspect the machine on site under power and see the condition for yourself.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 340 mm, panjang pembubutan: 1.100 mm, lubang spindel: 63 mm, Diameter pada pembengkokan 600 mm, berat benda kerja maks. 1000 kg, 1200 Nm, kecepatan putar 625–2500, 20 kW Kodpfx Asx Sxb Deg Rsdi

Kondisi: siap digunakan (bekas), jam operasional: 33.600 h, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 83 mm, lebar di tengah: 2.000 mm, diameter pembubutan di atas alas geser: 570 mm, kecepatan spindel (maks.): 2.500 rpm, model controller: Siemens 810D, 1 Kjdpfsxqpgfjx Ag Rsdi

Kondisi: bekas, Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Weiler Matador VS2, tahun pembuatan 1992, chuck tiga rahang, Multifix, pelindung cipratan belakang, pelindung chuck elektrik. Mesin dalam kondisi baik dan siap pakai, dapat didemonstrasikan dalam keadaan terhubung listrik setelah perjanjian. Kdsdpfox Sqvgox Ag Rsi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, ex-technical school Technical Data: >> Year of manufacture: 1992 Machine no.: 92 160 3260 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting options: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake selectable >> Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout from K&C with operating manual Functions: mm/inch conversion, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switch, >> Collet chuck with NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck (with 1 set of jaws) >> Quick-change toolpost with 4 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system Kdsdpsx Eb A Uofx Ag Roi >> Operating manual, spare parts list About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, year 1992, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce ground-like finishes. You are welcome to inspect the machine under power on site and see its condition for yourself.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 – overhauled Newly painted in RAL 7035 light grey Machine no.: CK17 Kedpfx Agov D Ip Ns Rjdi Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm With warranty Geometric inspection with test report Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Chip guard to the rear - Removable chip tray - Operating manual - Used, as seen -

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1974, Universal lead- and feed-screw lathe Manufacturer: WEILER Kdjdpfx Agomgadds Rei Model: Commodor Year of manufacture: 1974 - overhauled Newly painted RAL 7035 light grey Machine no.: 0068 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: 56 mm with warranty Geometric acceptance with inspection protocol Equipment: - 3-axis digital readout FAGOR Innova 30i-T, new - Chuck guard with electrical interlock - Quick-change tool post, size B - Simple bed stop - Coolant system - Operating manual - Used, as seen -

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Universal lead and feed screw lathe Brand: WEILER Model: Praktikant 160 B Year of manufacture: 1990 – overhauled Newly painted in RAL 7035 light grey Machine no.: 90-160-2054 Centre height: 160 mm Centre distance: 650 mm Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant system - Electrically interlocked chuck guard - Quick-change tool post size A - Simple bed stop - Chip guard (rear wall) - Operating manual With warranty Ksdpfx Aohy Tdyog Rjdi Sold as seen/used The machine is technically compliant with the state of the art at the time of manufacture.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1989, Universal lead and feed screw lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled Newly painted in RAL 7035 light grey Machine no.: 1401 with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip guard/rear splash guard - Operating manual - Used, as seen - Ksdjg R S Rcjpfx Ag Redi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Tinggi pusat: 160 mm Jarak pusat: 650 mm Ksdpfx Aew Sn Ireg Rjdi Kecepatan spindle: 2.500 min-1 Multifix Kepala lepas Aksesoris

Tahun pembuatan: 1977, Kondisi: bekas, Weiler Matador VS2 lathe, year of manufacture approx. 1977, equipped with collets, collet tube, three-jaw chuck, and Multifix quick-change tool post. Front guideway shows signs of wear. The machine is in operational condition and can be demonstrated under power by prior arrangement. Kedpfxsmdn Dxs Ag Rodi

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Provisur Weiler 878 grinder, model 50hp. Mesin hebat untuk produsen burger, sosis, dan makanan hewan peliharaan. Dapat menggiling daging segar atau daging beku yang sudah diparut. Hopper diperpanjang. Kedpfx Agex Av Ruo Redi

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1977, Mesin Bubut Mekanik Merek: WEILER Model: MDU 260 Tahun pembuatan: 1977 - sudah diuji bengkel No. mesin: 14942 Tinggi senter: 125 mm Lubang spindel: 28 mm Perlengkapan: - Pelindung chuck elektris - Chuck 3 rahang Ø 140 mm termasuk set rahang putar Kdodpfxjxv A I Te Ag Roi termasuk set rahang bor - Chuck 4 rahang Ø 140 mm termasuk set rahang putar termasuk set rahang bor - Kunci chuck pengaman - Perangkat penjepit manual - Set collet W28 (366E) - Set (25 pcs) collet W28 (366E) ukuran 1,0-25,0 mm naik 1,0 mm - Pusat tetap untuk headstock W28 (366E) - Pemegang pahat quick-change, badan utama ukuran A - Buku manual pengoperasian Bekas, dijual sesuai kondisi tanpa garansi Kondisi teknis mesin sesuai standar tahun pembuatannya.

Kondisi: baik (bekas), Tahun pembuatan: 1988, Weiler lathe Model: Condor B 2-axis digital readout Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Speed range: 22–2800 rpm Tailstock Morse taper: MK 3 Coolant pump (not connected) Work light automatic longitudinal and cross feed Spindle brake - Hinged chuck guard - Splash guard Kdjdpfxjvgmbvo Ag Rsi Weight approx. 1,040 kg 3-jaw chuck Multifix B quick-change tool post Live centre

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: Kodpfxju Aftgs Ag Redi >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: Kedpfxovtp Ede Ag Rodi >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm Kodpfx Ajvivmyjg Rsdi >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed screw lathe with 3-axis digital readout from K&C, NEW, CE compliant!! Technical data: - Machine no.: 2442, year of manufacture: 1997 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric pitch range: 0.18 to 28 mm - Weight: approx. 1100 kg - Spindle brake, switchable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and features: - 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, operating manual included Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch, etc. - 1 pc. new 3-jaw chuck, 160 mm, incl. 2 sets of jaws - 1 pc. 4-jaw chuck, 200 mm, incl. 1 set of jaws - Collet chuck unit, NEW, and collets NEW, range 3 to 25 mm in 1 mm increments Ksdpfx Aoxcuazsg Rjdi - Multifix toolpost size B, with 2 steel holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet For safety: electronic spindle protection, 2 emergency stop buttons, change gear cover with limit switch, spindle brake About this machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to view and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Technical Data: >> Year of manufacture: 1987 Machine no.: 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock quill: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis digital readout, 12 months' manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200 tool programs, taper calculation, radius/diameter, quick-zero, counting direction toggle >> 1 piece 160 mm 3-jaw chuck, NEW, 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and collets, NEW, from 3 to 26 mm in 1 mm increments Kdodpfx Agjwrmuxs Rsi >> Multifix B size toolpost with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splashguard >> Coolant system >> Machine levelling feet About the Machine: For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely disassembled and newly painted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has undergone complete electrical and mechanical inspection. A full oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take advantage of the opportunity to inspect and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed shaft lathe with brand-new K&C 3-axis digital readout, direct from a training workshop! Technical Data: >> Machine No.: 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm Kodsw Nw Dqopfx Ag Redi >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027, size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, selectable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Accessories and Equipment: >> 3-axis digital readout by K&C – NEW, 12 months manufacturer warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, quick-zeroing, count direction switch, etc. >> 1 piece 3-jaw chuck NEW, 160 mm with 2 sets of jaws >> 1 piece 4-jaw chuck, 160 mm, with 1 set of jaws >> Collet chuck NEW, and new collets from 2 to 24 mm in 1 mm increments >> Multifix toolpost size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear guard >> Fixed steady >> Machine feet Safety features: electronic spindle guard, 2 emergency stops, change gear box with limit switch, spindle brake About the Machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. This is a very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has undergone a thorough electrical and mechanical inspection by us, including a complete oil change. This newer generation of Weiler lathes is particularly user-friendly. Take advantage of the opportunity to view and test this machine under power at our facility.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock Kedpjxu Hlaefx Ag Rjdi >> Tailstock taper MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions (LxHxD): 1.83 m x 1.29 m x 0.88 m Accessories and Features: >> 3-axis Heidenhain digital readout >> 1 pc new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets (partially duplicate sizes) >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Rotating centre Safety Features: >> Lead and feed screw cover >> 2 emergency stop buttons >> Spindle brake About the Machine: Offered here is a used Weiler Condor 81 lathe, year 1988, in very good condition. The machine is fully functional, of course. For safety, the lead and feed screws are equipped with protective covers. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Tahun pembuatan: 1986, Kondisi: bekas, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by prior arrangement. Kjdpon Ard Dsfx Ag Rjdi

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 180 mm, lubang spindel: 40 mm, diameter pembubutan: 330 mm, diameter pembubutan di atas alas geser: 330 mm, tinggi pusat: 165 mm, panjang pembubutan: 750 mm, gores kuas bulu: 110 mm, kecepatan rotasi (maks.): 2.800 rpm, kecepatan rotasi (min.): 22 rpm, daya: 5,5 kW (7,48 hp), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Weiler Condor AC infinitely variable lathe Kdjdpforuqzcox Ag Rji