Beli Weiler Mdu 260 bekas (183)

Kondisi: sangat baik (bekas), Swing diameter over bed 330 mm Centre distance 750 mm Spindle speeds 1–4,500 rpm Csdeud Naqspfx Abhjgn Control: WEILER C3 Various accessories MARCELS MACHINEN CH

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: Cgjdpfeu Aftgjx Abhen >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 Cjdpfevtp Edox Abhsgn >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson-ES8 From Training Workshop – Excellent Condition! Technical Data: • Year of Manufacture: approx. 1990 Machine No. 3768 • Centre Height: 120 mm • Centre Distance: 430 mm • Spindle Speeds: 60 – 3000 rpm in 18 gear steps • Spindle Bore: 23 mm • Short Taper Spindle Nose DIN 4 • Tailstock Taper: MK 2 Codpfxevkfhpo Abhegn • Feeds: from 0.03 to 0.15 mm/rev • Thread Types: Metric, Imperial, Module, and Diametral Pitch • Metric Thread Pitches: from 0.25 to 2.5 mm • Weight: approx. 360 kg • Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Equipment and Features: • 3-Axis Digital Readout by Easson ES8 • Collet chuck system 1–20 mm, 1 mm increments, incl. draw tube • 1 Three-jaw chuck with 2 sets of jaws • 1 Four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Steady rest About the Machine: For sale is a Weiler Primus lead and feed screw lathe, built circa 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly, and the bedways are in very good condition. Even at high speeds, the Weiler runs quietly. The machine comes from a major company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect the machine on site under power and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm Cgedpfx Abevivmyohon >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed screw lathe with 3-axis digital readout from K&C, NEW, CE compliant!! Technical data: - Machine no.: 2442, year of manufacture: 1997 Csdpfsxcuazox Abhegn - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric pitch range: 0.18 to 28 mm - Weight: approx. 1100 kg - Spindle brake, switchable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and features: - 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, operating manual included Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch, etc. - 1 pc. new 3-jaw chuck, 160 mm, incl. 2 sets of jaws - 1 pc. 4-jaw chuck, 200 mm, incl. 1 set of jaws - Collet chuck unit, NEW, and collets NEW, range 3 to 25 mm in 1 mm increments - Multifix toolpost size B, with 2 steel holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet For safety: electronic spindle protection, 2 emergency stop buttons, change gear cover with limit switch, spindle brake About this machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to view and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Weiler Primus VC Precision Centre Lathe, 3-Axis Digital Readout K&C NEW with VC Drive, stepless speed control, and CE conformity – very good condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock Cgsdpfow Idlljx Abhsn >> Tailstock: Morse taper MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electric chip guard >> Machine feet >> Splash guard About the machine: Offered is a Weiler Primus VC lead and feed screw lathe, year of manufacture 2003, in very good original condition. This is a very well-maintained lathe with VC drive and stepless spindle speed control. The digital readout and scales by K&C are brand new. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site to verify its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Cgedpfxewrmuxe Abhon Technical Data: >> Year of manufacture: 1987 Machine no.: 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock quill: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis digital readout, 12 months' manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200 tool programs, taper calculation, radius/diameter, quick-zero, counting direction toggle >> 1 piece 160 mm 3-jaw chuck, NEW, 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and collets, NEW, from 3 to 26 mm in 1 mm increments >> Multifix B size toolpost with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splashguard >> Coolant system >> Machine levelling feet About the Machine: For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely disassembled and newly painted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has undergone complete electrical and mechanical inspection. A full oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take advantage of the opportunity to inspect and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed shaft lathe with brand-new K&C 3-axis digital readout, direct from a training workshop! Technical Data: >> Machine No.: 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027, size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, selectable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Accessories and Equipment: >> 3-axis digital readout by K&C – NEW, 12 months manufacturer warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, quick-zeroing, count direction switch, etc. >> 1 piece 3-jaw chuck NEW, 160 mm with 2 sets of jaws Cjdpfx Aew Nw Dqjbhjgn >> 1 piece 4-jaw chuck, 160 mm, with 1 set of jaws >> Collet chuck NEW, and new collets from 2 to 24 mm in 1 mm increments >> Multifix toolpost size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear guard >> Fixed steady >> Machine feet Safety features: electronic spindle guard, 2 emergency stops, change gear box with limit switch, spindle brake About the Machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. This is a very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has undergone a thorough electrical and mechanical inspection by us, including a complete oil change. This newer generation of Weiler lathes is particularly user-friendly. Take advantage of the opportunity to view and test this machine under power at our facility.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Technical Data: >> Year of manufacture: 1983 Machine no.: 83-067 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose according to DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty, including operation manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter switching, quick zeroing, counting direction switching >> 1 piece NEW 160 mm 3-jaw chuck, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle guard >> Rear splash guard Cgedpfxowb Supe Abhon >> Coolant system >> Machine leveling feet About the machine: A used Weiler Condor 81 is offered here in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our premises.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock taper MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions (LxHxD): 1.83 m x 1.29 m x 0.88 m Accessories and Features: >> 3-axis Heidenhain digital readout >> 1 pc new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets (partially duplicate sizes) >> Multifix size B with 3 tool holders Cgedsxu Hlajpfx Abhen >> Bed stop >> Machine feet >> Drill chuck >> Rotating centre Safety Features: >> Lead and feed screw cover >> 2 emergency stop buttons >> Spindle brake About the Machine: Offered here is a used Weiler Condor 81 lathe, year 1988, in very good condition. The machine is fully functional, of course. For safety, the lead and feed screws are equipped with protective covers. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Kondisi: baik (bekas), Leit & Zugspindel Mesin Bubut WEILER CONDOR - Cat asli - Ketinggian center 165 mm - Diameter putar di atas ranjang 330 mm - Diameter putar di atas support 170 mm - Jarak antara center 800 mm - Kecepatan spindle 24 - 2800 rpm - Otomatis feed memanjang / melintang - Lubang spindle 38 mm - Tailstock MK 3 - Perlengkapan collet + 17x collet - Chuck tiga rahang - Multifix dengan insert - Pelindung chuck elektrik Codpfx Aex A D Ubjbhjgn - Pelindung serpihan belakang - Lampu kerja - Berbagai aksesori - Dokumentasi Dimensi: P x L x T 1,8 x 0,9 x 1,6 meter / Berat 800 Kg Kesalahan penulisan dan input dapat terjadi

Kondisi: bekas, Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Lead dan Feed Spindle Prod. WEILER Tipe: COMMODOR Tahun: 1979 Data Teknis Merek: Weiler Tipe: Commodor Jarak antara pusat: 1000 mm Diameter putar di atas alas: 400 mm Ø lubang spindle: 50 mm Rentang kecepatan putaran: 63-2000 rpm Daya penggerak: 4 kW Dimensi: sekitar P 2,2 x L 1,0 x T 1,7 m Berat: sekitar 1,5 t Perlengkapan Cgedpfsxt Ngqjx Abhjn • Indikator digital 3 sumbu • Bor chuck • Chuck 3 rahang merek Röhm, D 200 mm • Dudukan Multifix • Chuck 3 rahang tambahan yang terletak di mesin tidak termasuk dalam pengiriman! Semua informasi tanpa jaminan. Demonstrasi operasional dapat dilakukan kapan saja di ruang pamer kami.

Kondisi: baik (bekas), Jarak antara ujung: 450 mm Tinggi ujung: 120 mm Lubang spindle: 23 mm Kecepatan: 40 – 3000 rpm Penggerak variabel kontinu dengan 3 tingkat transmisi & tampilan kecepatan digital Tailstock: MT 2 Daya penggerak: 1,5 kW Berat: 350 kg Dimensi: 1200 x 650 x 1330 mm Codpjw I A Uxjfx Abhsgn Pewarnaan: Reseda hijau RAL 6011 Tampilan digital: Opsional dengan biaya tambahan Aksesori: Aksesori lainnya tersedia sesuai permintaan

Kondisi: baik (bekas), WEILER Praktikant 800 R / Mesin Bubut Poros Utama & Tarik dari lembaga pendidikan - Diameter pembubutan di atas tempat tidur: 300 mm - Diameter pembubutan di atas support: 150 mm - Panjang pembubutan: 800 mm - Lubang spindle: 42 mm - Rentang kecepatan putar: 40–2000 rpm - Feed otomatis longitudinal & melintang - Ulir / Metrik / Imperial - Tailstock MK 3 - Daya motor: 3 KW - Multifix dengan sisipan - Sistem penjepit cepat collet termasuk collet - Pelindung chuck - Dinding penahan serpihan dengan lampu kerja - Tombol darurat - Roda gigi ganti - Center putar + chuck bor - Lemari alat Cgjdpfx Absxyqxnjhjn - Dokumentasi Dimensi: P x L x T: 1,8 x 0,8 x 1,6 meter / Berat: 750 kg Kesalahan atau kekeliruan data dapat terjadi.

Kondisi: sangat baik (bekas), Kondisi sangat baik, rutin diservis (faktur tersedia), banyak aksesori! Cgodpfexw D S Aex Abhjn

Kondisi: sangat baik (bekas), WEILER PRIMUS Tipe MD-G - Ketinggian senter: 125 mm - Jarak antara senter: 400 mm - Rentang kecepatan putar: 40–3000 rpm - Lubang spindle: 24 mm - Pelindung chuck elektrik - Multifix dengan sisipan - Tailstock dengan pinol bor - Chuck empat rahang - Lampu kerja - Pembatas ranjang - Dokumentasi Cgodexw H Dbjpfx Abhjn Dimensi: P x L x T: 1,3 x 0,8 x 1,6 meter / Berat: 450 kg Kesalahan dan kekeliruan informasi dapat terjadi.

Tahun pembuatan: 1977, Kondisi: bekas, Weiler Matador lathe, year of manufacture approx. 1977, three-jaw chuck, Multifix. The machine is in operational condition and can be demonstrated under power by arrangement. Cgedpfxsnkad Sj Abhjn

Kondisi: baik (bekas), Tahun pembuatan: 2001, Mesin bubut - kontrol siklus Produsen: WEILER Model mesin: E 35 Kontrol: Siemens / Weiler D2 Tahun produksi: 2001 DATA TEKNIS Cjdpfexl Ulpox Abhogn Jarak antara pusat (mm): 950 Tinggi pusat (mm): 200 Diameter putar maksimum di atas eretan (mm): 200 Diameter putar maksimum di atas tempat tidur (mm): 410 Spindel - Kecepatan maksimum (rpm): 3.000 Senter ekor - Koni dalam: MK 4 Daya terpasang (kW): 10 DIMENSI & BERAT Panjang x lebar x tinggi (mm): 2.300 x 1.400 x 1.700 Berat sekitar (kg): 2.100 Perubahan dan kesalahan dalam data teknis dan spesifikasi dapat terjadi.

Kondisi: sangat baik (bekas), lubang spindel: 38 mm, diameter pembubutan di atas alas geser: 340 mm, diameter pembubutan di atas carriage atas: 200 mm, panjang pembubutan: 750 mm, panjang total: 1.700 mm, lebar total: 650 mm, tinggi total: 1.500 mm, kecepatan spindel (maks.): 2.800 rpm, kecepatan spindel (min.): 12 rpm, berat keseluruhan: 800 kg, Equipped with: Codpewxq Icefx Abhogn – Tailstock – Multifix quick-change tool post – RÖHM three-jaw chuck (Ø 160 mm)

Kondisi: baik (bekas), lubang spindel: 28 mm, diameter pembubutan di atas alas geser: 300 mm, diameter pembubutan di atas carriage atas: 200 mm, panjang pembubutan: 500 mm, panjang total: 1.400 mm, lebar total: 700 mm, tinggi total: 1.600 mm, berat keseluruhan: 800 kg, Equipped with: – Multifix quick-change toolpost – Four-jaw chuck (Ø 130 mm) Cedewxq Iijpfx Abhjgn – Digital readout by HEIDENHAIN

Kondisi: baik (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 10279, diameter putar di atas sled silang: 200 mm, lubang spindel: 35 mm, diameter pembubutan: 300 mm, tinggi pusat: 150 mm, panjang pembubutan: 750 mm, panjang total: 1.860 mm, lebar total: 700 mm, tinggi total: 1.800 mm, kecepatan spindel (maks.): 2.800 rpm, kecepatan spindel (min.): 40 rpm, berat keseluruhan: 1.030 kg, - Operating voltage: 380 V - Connected load: 3 kW - Rated current: 25 A - Frequency: 50 Hz Equipment: - Tailstock - Multifix Type B toolholder - Three-jaw chuck (diameter: 160 mm) - 2-axis digital readout by RSF Cgodpfjv Irgtsx Abhsn

Kondisi: seperti baru (mesin pameran), WEILER COMMODOR 180 GSD / Mesin baru - Mesin pameran - belum pernah digunakan SIAP DIKIRIM DARI GUDANG -Mesin pameran / BARU-Belum digunakan -Tanda CE -Display digital 3-sumbu -Tinggi senter 180mm -Diameter ayun di atas ranjang 380mm -Diameter ayun di atas carriage 215mm -Jarak antara senter 1000mm -Lubang spindle 56mm -Putaran / gearbox 25 - 2000 rpm -Umur otomatis membujur / melintang -Baut / Metrik / Inci / Diametral -Ekor tetap / Kerucut tailstock MK 4 -Jarak gerak pinol 150mm -Perangkat pendingin -Multifix dengan insert -Catok tiga rahang 200mm Csdpfx Abexviiqohogn -Lampu kerja -Pelindung serpihan belakang -Dokumentasi Dimensi: PxLxT 2,6x1,6x1,7 Meter / Berat 2000kg Kesalahan pengetikan / input dapat terjadi.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4397, Dear Sir or Madam, For sale is a Weiler Praktikant 160 AC lathe, year of manufacture 1998, equipped with an original Weiler 3-axis digital readout. This newer "AC" version stands out in particular due to its stepless speed control, which makes working on the already highly user-friendly machine even easier. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and optical condition. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine and its condition at our premises. Availability: on request Machine no.: 4397 Year of manufacture: 1998 Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20-3000 rpm, stepless Tailstock quill taper: MT3 Quill stroke: 85 mm Longitudinal feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Threading options: Metric, Inch, Module, Diametral Pitch Metric thread pitch: 0.25 - 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Cgsdoq H D U Eepfx Abhon Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (LxHxW) Weight: approx. 720 kg Further equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and additional accessories available on request... Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can carry out a complete or partial overhaul of your chosen machine - Upon request, we repaint your machine in your desired colour - Upon request, you can directly order further accessories such as tools, etc. - Upon request, we can fit additional accessories such as safety features, etc. - We are happy to take care of shipping and/or installation.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3595, Sehr geehrte Damen und Herren, Cgedpfx Abjthd Shohsn For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings and the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify at our premises. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Thread types possible: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, retractable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine for you - Upon request, we can repaint the machine in your desired colour - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange for shipping and/or delivery