Beli Weiler Primus Vc bekas (176)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: Iodpfx Asvivmyea Netb >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: sangat baik (bekas), WEILER PRIMUS Tipe MD-G - Ketinggian senter: 125 mm - Jarak antara senter: 400 mm - Rentang kecepatan putar: 40–3000 rpm - Lubang spindle: 24 mm - Pelindung chuck elektrik - Multifix dengan sisipan Itedpfxsxw H Dbs Aa Nsb - Tailstock dengan pinol bor - Chuck empat rahang - Lampu kerja - Pembatas ranjang - Dokumentasi Dimensi: P x L x T: 1,3 x 0,8 x 1,6 meter / Berat: 450 kg Kesalahan dan kekeliruan informasi dapat terjadi.

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant VC Precision Lathe Manufacturer: Weiler Model: Weiler Praktikant VC Precision Lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical Details Turning diameter: 250 mm Turning length: 650 mm Centre height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Drive power – main spindle: 10 / 6.0 kW Gear stages: 1 Spindle nose: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool Post: System: MultiFix B Turning tool shank size: 20 x 20 Tailstock: Quill stroke: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inch: 80–2 1/” Iedpfx Aajxd Tknj Nstb Module: 0.25 – 4 mm Travel: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel range: 180° Total connected load: 15 kVA Machine weight: approx. 1.0 t Space requirement: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC Precision Lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool kit

Kondisi: sangat baik (bekas), Parallel lathe WEILER Typ PRIMUS Zwischen Spitzen: 400 mm Max. Drehdurchmesser über Bett: 250 mm Max. Drehdurchmesser über Planschlitten: 130 mm Spindeldurchlass: 24 mm Multifix Schnellwechselrevolver Typ A Itedexnp I Djpfx Aa Neb Dreibackenfutter Ø 155 mm Gewindeschneiden: Metrisch + Whitworth Reitstock MK2 HEIDENHAIN Digitalanzeige ND522 Automatische Vorschübe auf 2 Achsen Neues Schaltschrank Lieferumfang: 1 Vierbackenfutter Ø 155 mm, 4 Werkzeughalter, 1 Bohrfutter Anschluss: 380 V Abmessungen (L x B x H): 1300 x 900 x 1900 mm Gewicht: ca. 500 kg Maschine in SEHR GUTEM ZUSTAND

Kondisi: bekas, Swing diameter over bed: 250 mm Swing diameter over cross slide: . mm Distance between centers: approx. 400 mm Center height: approx. 125 mm Spindle speed range: 80 – 3,000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions (L x W x H): approx. 1,200 x 650 x 1,300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm with drilling and turning jaws; Itsdpfx Aaowa Dz Ee Nob Collet chuck device incl. collets 1–20 mm in 1 mm increments; Multifix size A with 3 quick-change tool holders; Chuck guard with safety interlock

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 160 mm, lebar di tengah: 650 mm, kecepatan rotasi (maks.): 4.000 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Dear Sir or Madam, For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is distinguished by the Siemens control panel and fully stepless speed regulation. As the designation suggests, the VC is capable of operating with constant cutting speed. In our workshop, the machine undergoes extensive partial refurbishment to ensure it is in excellent technical and visual condition. All slideways are in good order, the gearboxes run smoothly and quietly, and all levers are easy to operate. You are welcome to visit us on-site to inspect the condition for yourself. Availability: on request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill stroke: 85 mm Itjdpfx Ajwhx I Nja Njb Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg Further equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, 2x emergency stop, operating manual, EC Declaration of Conformity, and much more on request... Our service promise to you: - We are a certified Master Workshop specialising in mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your chosen machine - Upon request, we can repaint your chosen machine in your preferred colour - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety equipment - We are happy to arrange shipping and/or on-site installation

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, excellent, like new, no signs of wear, includes new maintenance and measurement protocol before sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Swivel range of top slide: +/-65° Bed carriage guide length: 350 mm Bed width: 205 mm Tool section (height x width): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) Size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Headstock spindle internal taper: Metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal: 0.02 – 0.63 mm/rev Face: 0.006 – 0.2 mm/rev Itsdpfex I Rtkjx Aa Njb Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 MT Weight without packaging and accessories: approx. 1150 kg Length / Width / Height, net: 1720x890x1700 mm Headstock / Rear panel / Sliding safety cover: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of Manufacture: 2021 Condition: Used, very good, as new; includes new service and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swiveling range: +/-65° Bed carriage guide length: 350 mm Bed width: 205 mm Tool shank cross-section (height x width): 20 x 20 mm Iodpfx Aasx Ivy Nj Notb Height from top slide to turning centre: 30 mm Spindle nose to ISO DIN 702-3 (DIN55027) Size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle internal taper: Metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gearbox stages: 1 Number of spindle speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / Rear panel / Sliding safety guard: Light Grey RAL 7035 Machine base / Bed: Basalt Grey RAL 7012 Digital display housing: Blue NCSS 4550-R80B

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-Axis Position Display, Infinitely Variable Speed, As-New Condition, Year of Manufacture 2019 Technical Data: >> Year of manufacture: 2019 >> Machine no.: OD08 >> Centre height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centres: 650 mm >> Spindle speeds: 30 to 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MK 3 >> Number of feeds: 24 >> Longitudinal feeds: 0.02 to 0.63 mm/rev >> Cross feeds: 0.006 to 0.2 mm/rev >> Thread cutting possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 1150 kg >> Spindle brake >> Dimensions: approx. length 1.72 m, height 1.7 m, depth 0.89 m Accessories and Equipment: >> Weiler position display >> Collet chuck system NEW, collets NEW from 3 to 26 mm >> 160 mm three-jaw chuck with 1 set of jaws >> Multifix size B with 3 tool holders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts plan Safety Features: >> Lockable main switch >> Emergency stop push button >> Electrically monitored chuck guard >> Automatic disengagement of each handwheel when feed is engaged VCplus Position Display: >> 8-inch colour screen >> 3 axes for bed, cross slide, and top slide >> 99 tool memory >> Oriented spindle stop >> Input for constant speed or cutting speed >> Feed and thread settings are displayed Isdpew Swkvefx Aa Njtb >> Thread cutting with electronic stop About the Machine: For sale is a Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-axis position display. Year of manufacture 2019, in as-new condition with original paintwork. Naturally, the machine is fully operational and supplied with new collets and chuck. Take advantage of the opportunity to view this machine live under power and convince yourself of its condition.

Kondisi: baik (bekas), Tahun pembuatan: 1988, 1 mesin bubut lead and drag spindle bekas Merek: Weiler Tipe: 160 B Tahun pembuatan: 1988 Data Teknis Jarak antara senter: 650 mm Diameter putaran di atas tempat tidur: 320 mm Diameter putaran di atas eretan plan: 192 mm Ketinggian senter: 160 mm Itedpfx Aow Sdr Hsa Nob Lubang spindle: 40 mm Daya nominal: 2,4 / 3 kW Kecepatan putar: 48 – 2500 rpm Dimensi: sekitar P 2,20 x L 1,10 x T 1,40 m Berat: sekitar 1 ton Perlengkapan Layar digital Heidenhain Kepala pemegang Multifix dengan berbagai sisipan Chuck 3 rahang Tombol darurat

Kondisi: bekas, Swing diameter over bed / mm Swing diameter over cross slide / mm Turning length / mm Itjdpfx Aewgi Tmja Nob

Kondisi: baik (bekas), Tahun pembuatan: 2000, 10623 Itsdpsyagiwjfx Aa Neb

Kondisi: bekas, 1 Itjdpfsyah Rvex Aa Nob

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, jam operasional: 51.392 h, tinggi total: 1.700 mm, berat keseluruhan: 1.300 kg, This Weiler E30 was manufactured in 1990. A robust centre lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of thread cutting operations, from metric to DP threads, and comes equipped with a Multifix toolpost size B. Ideally suited for precise and versatile turning tasks. Please contact us for further information about this machine. Additional Equipment • Multifix toolpost size B mounted • Fixed steady rest (optional), clamping range: 15–100 mm • Travelling steady rest (optional), clamping range: 10–85 mm • Collets from 3 mm (in 0.5 mm increments) • Tailstock with a MK3 sleeve Machine Advantages Technical Machine Advantages • Drive power 100% / 60% duty cycle: 9/11 kW • Maximum spindle torque: 180 Nm • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed motors • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10/7.5/5/3.5 m/min Itjdpfx Aaeyaimfe Nsb • Quill diameter: 50 mm • Quill stroke: 110 mm • Quill taper: MK 3 Additional Information Swing over cross slide: 160 mm Bed width: 240 mm Travel of cross slide: 180 mm Saddle slideway length: 395 mm Turning tool cross section (H x W): 20 x 20 mm Spindle nose according to DIN 55027, size 5 Spindle diameter at front bearing: 70 mm Main spindle taper: MK 5 Workpiece: Metric thread range: 0.1 – 400 mm Inch thread range: G/1" 1/4 – 56 Module thread range: mm DP thread range: 1–224 G/" Maximum number of threads: 50 Dimensions Machine depth: 1800 mm

Kondisi: bekas, en-001 Ijdjk S Ht Aepfx Aa Njtb

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1995, CNC TURNING MACHINE WEILER 'E 35' Equipped with 2-axis Siemens Sinumerik 805 Year of manufacture: 1995 Spindle bore: 54 mm Centre distance: 950 mm Swing over bed: 410 mm Speed range: 4 – 3000 rpm Including the following accessories: PARAT tool holder with 8 inserts Chuck guard 3-jaw chuck Ø 200 mm 4-jaw chuck Ø 200 mm Fixed steady rest 12 – 150 mm Chip collection tray Iedpfx Aajuzyw De Njtb Chip splash guard with lighting Coolant system 4 height-adjustable machine feet Operating manual

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Länge:1200mm Breite:800mm Iodpox Tp Dxsfx Aa Nstb Höhe:1200mm Gewicht:290kg

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal Iodpfxevrcqds Aa Netb >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp Itsdpfxevrckqs Aa Njb For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm Iodpfx Aajvv Etve Njtb >> Centre distance: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: 0.010 to 1.184 mm/rev >> Possible thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck with 32 collets (set is incomplete) with adapter >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Multifix tool post size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered here is a used Weiler Matador VS-2 in full working condition. Take the opportunity to inspect and test the machine under power on site to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C - NEW Itjdpfx Aajvambcj Neb Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter selection, quick zeroing, counting direction selection >> Collet chuck system, new collets from 3 to 26 mm in 1 mm steps >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix quick-change toolpost, new, size A, with 2 new tool holders >> Bed stop >> Electric chuck guard, new >> Machine lamp, LED, new >> Rear splash guard >> Operating manual >> Coolant device >> Machine levelling feet About the Machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, absolutely as-new condition. The guideways have been newly ground and hand-scraped. Acceptance as per inspection protocol. A very fine machine with electronic spindle guard. The accessories—collets, chuck, Multifix—are new. Spindles, nuts, bearings, belts, and wipers have been renewed. Take the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Iedpsvrdlcsfx Aa Notb Overhauled, including acceptance protocol certifying new-machine tolerances. Technical Specifications: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Equipment & Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction >> New collet chuck, NEW collets 3–25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Isdpfx Aewrm Dtsa Nstb Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B Leadscrew and Feed Shaft Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of manufacture: 1986 Machine no.: 86-160-348 >> Centre height: 160 mm Itedpfowthbijx Aa Njb >> Centre distance: 650 mm >> Spindle speeds (8 steps): from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake selectable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Features: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck, collets as new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: A Weiler Praktikant 160 B leadscrew and feed shaft lathe is being offered here, built to toolmaker’s precision and in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled and newly painted in light grey. All cross slides move very smoothly and evenly. The Weiler also runs smoothly at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view the machine under power on site and see the condition for yourself.

Kondisi: baru, Tahun pembuatan: 2025, Intern GSD One of the best-selling and most popular conventional precision lathes Distinguished by: sophisticated engineering highest precision long service life proven ergonomic design minimal footprint and extensive accessories. Proven over decades in single-part and small series production, in both craft and industrial settings, for training and professional development, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed rod protection Main spindle brake Toolroom accuracy according to DIN 8605 Two-speed brake motor Headstock gear transmission 16 fixed spindle speed levels Digital position display (optional) LED machine lamp TECHNICAL DATA: WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Centre distance: 650 mm LATHE SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Ijdpjwhzcpefx Aa Netb Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60% / 100% DC: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speed steps: 16 FEED RANGE Number: 24 Longitudinal: 0.02 – 0.63 mm/rev Cross: 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads: 0.25 – 8* mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Taper according to DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 * Inch and metric pitches 0.45; 0.75; 4.5 and 5.5 mm only possible with additional change gears. The machine is located in our showroom in 71334 Waiblingen-Beinstein and is immediately available. For equipment details, please contact us.