Beli Wintersteiger Jack 150 bekas (8)

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GSO -830, Mesin pembuat panel WINTERSTEIGER DSG ECO 150 MM, tahun 2013 Iodpfx Aow T U Areahotr

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AN2018080, panjang total: 12.860 mm, lebar total: 4.806 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, panjang pemakanan sumbu X: 3.000 mm, lebar kerja: 350 mm, daya: 25 kW (33,99 hp), pply/reTRC 1500 – Houtreparatie- en Cosmetische Machine Technische Beschrijving • Systeemoverzicht • Procesworkflow Systeemoverzicht De Wintersteiger TRC 1500 is een volledig geautomatiseerd industriële installatie voor het detecteren en repareren van defecten in houten panelen. Deze machine combineert geavanceerde 3D-scantechnologie met hogedrukthermoplastinjectie en levert zo consistente, hoogwaardige reparaties aan productiesnelheid. Defecten worden gerepareerd met thermoplastisch vulmateriaal via een injectie- en aanbrengunit. Dankzij nauwkeurige berekening van het vulvolume en gerichte injectie wordt geen vulmateriaal verspild. Ook de randen kunnen worden gevuld. Belangrijkste Kenmerken • Geautomatiseerde 3D-lasertriangulatie voor defectdetectie • Hogedruk thermoplastinjectie voor duurzame reparaties • Precisie-afwerkingsunit voor cosmetisch perfect resultaat • Onafhankelijke smelttemperatuurzones met 8 kg tank • Gesloten glycol-water koelsysteem voor gecontroleerde uitharding • Ethernet-gestuurd regelsysteem met remote onderhoud • Onbeperkt aantal productprofielen en intuïtieve scannerinterface Productbereik (Werkstuk-specificaties) Lengte 500–3000 mm Breedte 100–350 mm Dikte 3–30 mm Productiesnelheid tot 10 m/min – afhankelijk van aantal en grootte van defecten Vulsysteem – Injectie- en Aanbrengunits • Injectie-unit: • 3-assige positionering (X/Y servogestuurd, Z pneumatisch) • Drukgereguleerde toevoer van het smeltmateriaal • Hogedrukinjectie • Aanbrengunit: • 3-assige besturing • Fijnafwerking van gerepareerde zones Defectenscanner • 3D-lasertriangulatie en hogesnelheidscamerasysteem • Detecteert defecten vanaf circa 1 mm diepte • Automatische hoogteverstelling • 2D + 3D meting • Instelbare parameters voor houtsoorten Smeltunit • 8 kg tank • Onafhankelijke temperatuurzones • Geïntegreerde zuigerpomp voor constante druk Koelunit • Gesloten glycol-water circuit • Stabiele temperatuurregeling Besturingssysteem • Ethernet-communicatie met remote onderhoud • Toegang tot PLC, scanner, servoaandrijvingen • Energie-efficiënte regeneratieve aandrijftechniek Scannersoftware • Verwerkt 3D-lichtsectieprofielen • Bepaalt defectvolume en positie • Onbeperkt aantal productprogramma's • Intuïtieve bedieningsinterface Isdpfsx Dmdhox Aahotr Hogedrukinjectieproces 1. Smelten van het thermoplastische materiaal 2. Druk- en temperatuurregeling 3. Gerichte injectie in het defect 4. Directe koeling 5. Minimale oppervlaktesporen • Voordelen: • Laag materiaalverbruik • Uitstekende hechting • Geen verandering van omliggende houtstructuur Systeemarchitectuur • Smeltunit • Verwarmde slangen • Injectiekop • Koelplaat • Koelunit met retourstroom

Tahun pembuatan: 2009, jam operasional: 1.629 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Technical Description – Wintersteiger DSG Sonic Key Features: - Designed for thin-cutting of panels and boards in the production of lamellas/parquet flooring. - Play-free saw blade guidance for maximized cutting accuracy. - Symmetrical saw frame construction ensures even tension distribution across the saw blade. - Revolutionary drive concept with servo-controlled precision feed. - High frame stroke frequency: 550 strokes per minute. - Modular/ergonomic design: split construction for improved access and easy maintenance. DSG Sonic, maximum cutting height: - For 380 mm saw: cutting height 30–88 mm (or 45–88 mm, depending on configuration) - For 420 mm saw: cutting height 30–128 mm (or 45–128 mm, depending on configuration) - For 500 mm saw: cutting height 80–210 mm (or 45–210 mm) - For 550 mm saw: cutting height 80–254 mm (or 45–254 mm) Machine requirements and specifications: - Machine weight (base unit): approx. 3,000 kg - Dust extraction/exhaust: two connections required – Ø 120 mm and Ø 150 mm; extraction capacity approx. 3,200 m³/h (air speed ~30 m/s) - Compressed air pressure: minimum 6 bar; consumption approx. 200 l/min - Lubrication: Central lubrication system with carriage guide monitoring - Year of manufacture: 2009 - Operating hours: 1,629 - Condition: Very well maintained. Itsdpex Avzysfx Aahor

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2002, jam operasional: 23.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GSO-1513, panjang total: 3.840 mm, lebar total: 1.230 mm, tinggi total: 2.600 mm, jenis arus masuk: AC (pendingin udara), tegangan masuk: 400 V, kecepatan pemakanan sumbu X: -2.000 m/menit, lebar kerja: 200 mm, masa garansi: 12 bulan, daya: 29,5 kW (40,11 hp), DSG-200 for Lamella Production The machine has been completely overhauled and its control system upgraded to the latest technology, ensuring reliable spare parts supply. Exceptionally robust construction – feed system controlled via servo motors. The machine comes equipped with 2 saw frames – choice of transport system: channel or side/centerline guide module. Ijdpot Hd Enjfx Aahjtr Cutting height: 250 mm Saw blades, machine, and service provided by Wintersteiger.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Micro Grinder HT BSB 2019 (pre-owned). The machine has seen minimal use and has 30 operating hours. Saw blade sharpening machine with wet grinding system for band saw blades Machine voltage: 3x380-415V/50Hz Iedpfx Aasxcf H Sohjtr Each saw band is sharpened individually. However, the pass-through grinding system allows for efficient and precise sharpening of the blades. Advancing the saw blade takes place directly at the saw tooth, which compensates for minor blade inaccuracies and saves valuable stellite. The highly robust grinding spindle and blade clamping system provide a clean, fine grinding pattern with minimal grinding wheel wear. Simple switching between the integrated round and pointed tooth cams is possible. Blades of varying thickness can be easily centered using the built-in dial gauge. Wet grinding system ensures particularly fine surface finish and preserves the grinding disc, with the water tank integrated into the machine frame. Technical data: Grinding wheel diameter: 150 mm Tooth pitch: 5 - 25 mm Tooth height: 3 - 15 mm Blade width: 50 - 80 mm Blade length: unlimited Feed rate: approx. 25 teeth/min Grinding time: approx. 10 min/band Grinding motor: 0.65 kW Feed motor: 0.12 kW Weight: approx. 280 kg

Tahun pembuatan: 1999, Kondisi: bekas, en-GB: The DSG 200 vertical sawmill is an ideal solution for woodworking plants specialising in the production of furniture and wooden flooring. It is efficient and performs exceptionally well in operation. A used Wintersteiger mini sawmill is an excellent investment – one of its main advantages is its compact size compared to standard machines of this type, while still providing outstanding performance in material processing. It is designed for cutting components and adjusting them to the required dimensions. The machine is user-friendly and operators can quickly learn to use it proficiently. The key benefit of our sawmill is its comprehensive equipment, most notably the saw blade spray system controlled from the main panel, which enables precise cutting of wet material. The independent adjustment of the upper roller height allows for faster changeover of the cutting height. Ijdpfxetvm Hdj Aahstr Pneumatic feed pusher assists material advancement. TECHNICAL DATA: - Total power: 27.3 kW - Air Jet system motor: 2.3 kW - Siemens control panel - Feed rate: up to 2 m/min - Sawmill frame stroke: 210 mm - Number of strokes: 400/min - Infinitely adjustable cutting height on our frame: 45–250 mm - Maximum possible cutting height: 400 mm! - Cutting width with lateral pressure: 80–205 mm - Minimum block length: 250 mm - Lamella thickness from 1.5 mm (depending on wood type and cutting height) - Kerf of used saws: 0.9–1.1 mm (depending on cutting height) - Length: approx. 5000 mm - Width: approx. 1300 mm - Height: approx. 2600 mm - Weight: 5000 kg - Pneumatic feed pusher Included with the machine: - Complete large saw frame - Small saw frame - Frame pins - Frame tensioning wedges - Saw spacers - Wet cutting saw blades - Dry cutting saw blades - Set of upper drive rollers - 4 lower drive rollers - Full set of slideways - Frame yokes - Pocket cutting guides - Loading magazines - Technical documentation (DTR) - Electrical diagram

Tahun pembuatan: 2009, jam operasional: 214 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, DSG Sonic Thin-cut Frame Saw – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Iedpfxow Dp Ufj Aahstr Technical Data: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of saw frame strokes: approx. 550/min Cutting heights for different saw lengths: Saw length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) Saw length 420 mm → cutting height: 30–128 mm, 45–128 mm Saw length 500 mm → cutting height: 80–210 mm, 45–210 mm Saw length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For basic machine: +185 mm With magazine: 250–1700 mm With double planer: +250 mm Block height variation: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Other technical data: Cutting width with central fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss during cutting (kerf thickness): from 0.9 mm Saw blade lifespan (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): For the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator’s workplace: - Idle run: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction system and air: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Supply terminal cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Tahun pembuatan: 2006, Kondisi: bekas, • Cutting height (mm): 200 Isdom E Uf Aspfx Aahjtr • Cutting width (mm): 200