Beli Wmw F Heckert bekas (456)

Kondisi: bekas, Meja bundar, meja indeks bundar, perangkat pembagi WMW Tipe D 315 k No. Fabrik: 10930 Diameter meja: 315 mm Tinggi meja: 135 mm Rasio transmisi: 90 : 1 - Engkol dengan piringan berlubang dan penjepit gunting - Cincin skala untuk pembacaan pada engkol - Skala derajat dapat dibaca pada meja bundar - Cacing yang dapat diayunkan untuk pembagian langsung - Penguncian melalui tuas pengunci - Alur-T 14 mm pada pelat meja (satu titik pecah) Nkjdpfx Asxf Uytebvew - Piringan pembagi terpasang 23-28-33-42-51-61 Berat: 85 kg

Kondisi: siap digunakan (bekas), Strung de fațetare DP 2000 Diametru mandrineă: 2000 mm Lungime: 3500 mm Greutate aprox.: 22 t Nkodpfx Absv Hx R Njvew

Kondisi: bekas, Technical details: Plate length: 640 mm Plate width: 330 mm Plate thickness: 65 mm T-slots according to DIN 650 for T-slot nuts according to DIN 508 Nkedju R A A Ujpfx Abvow a=13.9 mm; b=24.2 mm; c=9.8 mm; h=19.9 mm

Kondisi: bekas, Technical details: Nedpfx Aou Ngdtebvokw Height above floor: 930 mm Machine weight approx.: 75 kg (+ 27 kg base frame) Dimensions (L x W x H): 0.6 x 0.48 x 0.43 m EDGE BEVELING MACHINE Application: For beveling Machine table (W x D): 600 x 240 mm with stop bar (L x H): 400 x 25 mm Built-in tool: cutter approx. 50 mm with 45° bevel profile Bevel width approx. 6 mm Voltage: 380 V with ON/OFF switch

Kondisi: bekas, Tahun pembuatan: 1985, Technical details: Pressure: 3 t Throat depth: 150 mm Stroke length (max.): 280 mm Installation height with bolster plate plunger/top: 355 mm Distance table/ram: 355 mm Clamping plate on table: 280 x 290 x 50 mm Through-hole in table: Ø 100 mm Ram speed (advance): 0.1 m/s Ram speed (return): 0.3 m/s Ram bore: Ø 20 x 40 mm Height above floor: 800 mm Total power requirement: 1.5 kW Machine weight approx.: 370 kg Dimensions approx. (LxWxH): 0.8 x 1.2 x 1.9 m The C-frame press is mounted on a base table (welded sheet steel). Operation is via foot switch. The press has been retrofitted: Nkodpfsu Nfvbox Abvjw - Holder for film with punching device and automatic feed (pneumatic) - FIBRO punching device (plastic disc with Ø 47.5 mm for punching) - Foot operation

Kondisi: bekas, Technical details: Pressure: 2.5 t Outreach: 155 mm Maximum ram stroke: 280 mm Distance table/ram: 450 mm Clamping plate on table: 260 x 1000 mm Ram approach speed: 0.08 m/s Ram return speed: 0.32 m/s Nodju Nfv Ujpfx Abvokw Ram bore: Ø 20 x 45 mm Height above floor: 930 mm Total power requirement: 1.1 kW Machine weight approx.: 500 kg Machine dimensions approx. LxWxH: 0.85 x 1.0 x 1.7 m The machine is equipped for straightening work.

Kondisi: bekas, Tahun pembuatan: 1964, Technische Details: Wellendurchmesser: max. 120 mm Wellenlänge - max.: 800 mm Profilhöhe/Tiefe: max. 90 mm Schleifspindeldrehzahl: unbekannt U/min Tischgröße: Ø 150 mm Betriebsspannung: 380 V Gesamtleistungsbedarf: 1.1 kW Maschinengewicht ca.: 0.675 t Abmessung Maschine ca. LxBxH: 0.75 x 0.70 x 2.0 m Application: Vertical internal cylindrical grinding of shafts at the face, as well as center grinding using a shaft grinder Spindle head technical details: - Equipped with a shaft grinder Ø 13 mm, 60°; clamping element: Ø 6 mm, collet chuck - Adjustment travel: vertical 950 mm via handwheel, lateral (cross) 80 mm via hand crank - Diamond dresser, lateral adjustment: 80 mm Table additional information: - With fixed center 60° - Speed: 63 / 125 rpm - Vertical adjustment: 600 mm, usable height: 1,100 mm, manual operation Steady rest: - Prism guide Accessories: - Fixed center L = 180 mm - Fixed center L = 300 mm Nkedpfxju Ngr Dj Abvew - Various shaft grinders - Various clamping and auxiliary tools

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Njdpfxou Nfvuj Abvjkw Pressing force: 160 t Throat depth: 360 mm Ram stroke – max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x Ø 62 mm Ram advance speed: 200 mm/s Ram return speed: 125 mm/s Ram surface: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total connected load: 17 kW Machine weight approx.: 7,200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter In stock

Kondisi: bekas, Technical details: Pressing force: 2.3 t Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Shut height with bolster plate/ram up: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Through-hole in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Taper hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total power requirement: 1.1 kW Machine weight approx.: 0.5 t Machine dimensions (LxWxH): approx. 0.6 x 0.7 x 1.6 m Press with mechanical 2-hand operation. Nsdpsu Nfwlefx Abvekw Pressure test performed up to 2.3 t. Good condition.

Kondisi: bekas, Tahun pembuatan: 1991, Technical Details: Pressure: 160 t Stroke: 500 mm Throat depth: 360 mm Ram stroke - max.: 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Through-hole in table: 4x D=62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Nedpfxew D Awme Abvskw Ram area: 450 x 850 mm Pin hole in ram: 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Machine dimensions approx. LxWxH: 2.1 x 1.4 x 3.4 m

Kondisi: bekas, Technical details: Pressure: 25 t Column clearance: 360 mm Stroke: 500 mm Installation height, table/ram at top: 800 mm Nkodpfx Absu U D I Rovsw Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 0.200 m/s Ram speed, return: 0.45 m/s Table size: 630 x 500 x 71 mm Table opening: Ø 182 mm Ram clamping surface: 450 x 360 mm Pin hole in ram: Ø 32 x 72 mm Ram diameter: Ø 125 mm Height above floor: 710 mm Total power requirement: 12.5 kW Machine weight approx.: 2.4 t Machine dimensions (LxWxH) approx.: 1.7 x 1.1 x 2.95 m Operation via two-hand control console (and single-hand operation in setup mode) Continuous and single stroke operation TÜV approval valid until 05/2024 i.D. *

Kondisi: bekas, Tahun pembuatan: 1984, en-GB-Technische-Details-The-grinding-spindle-is-equipped-with-t wo-hand-levers Nksdpfeu Ng Irox Abvow

Kondisi: bekas, Detail teknis: Lebar: 1270 mm Kedalaman: 1000 mm Njdpfx Abou N Ea Hjvokw Tinggi: 1600 mm Tersedia 3 buah sudut penjepit Alur-T sesuai DIN 650: a=35 mm; b=60 mm; c=27 mm; h=65 mm Harga per sudut

Kondisi: bekas, en_US: Technical Details: Drilling capacity in steel (diameter): 40 mm Throat depth: 360 mm Drilling stroke: 280 mm Spindle taper: MT 5 Spindle speed: 32 - 1400 rpm Feed: 0.11 - 1.73 mm/rev Connected load: 6 kW Max. distance spindle/table: 750 mm Table clamping surface: 780 x 650 mm Drill table adjustment: vertical 800 mm Column diameter/size: 230 x 950 mm Machine dimensions (LxWxH): approx. 1.1 x 0.8 x 2.8 m Nedpjwid Uwjfx Abvokw Machine weight: approx. 1.5 t For right and left-hand thread cutting with reversing feature *

Kondisi: bekas, Technical Details: Turning length: 630 mm Swing diameter over slide rest (rear slide rest): 250 mm Center height over bed: 270 mm Center distance: 900 mm Spindle bore: 26 mm Nsdpfx Abevbh N Rovskw Stepless speed range: 1.8 – 450 rpm Return speed: 23 / 32 / 46 / 370 / 510 / 740 rpm Cross feed: 0.07 – 1.11 / 36 steps mm/rev Longitudinal feeds: 0.063 – 0.63 / 12 steps mm/rev Tailstock quill taper: MK 5 Quill stroke: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.9 t Machine dimensions approx. LxWxH: 3.2 x 1.2 x 1.8 m Application: Primarily for back turning and relief grinding of cutting tools (especially hobs with or without thread). Back turning and relief grinding is possible from the front, from the rear, and in the axial direction of the machine. The main drive is via an 8-step manually shifted gearbox. The feed gearbox is configured as a 12-step manually shifted gearbox. Swivel range of the rear slide = 360°. Swivel range of the cross slide = 360°. Equipment: - Faceplate Ø 210 mm with fixed center - Fixed center in tailstock - Supplied with 4 machine feet - 3-jaw chuck Ø 250 mm - internal.

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Nsdeu Ng Ncspfx Abvskw Grinding diameter min/max, mounting: Ø 200 x 32 mm Spindle speed: 3000 rpm Total power requirement: approx. 1.2 kW Machine weight approx.: 0.24 t Machine dimensions approx. (LxWxH): 0.7 x 0.9 x 1.6 m The grinding spindle is equipped with two hand levers: Left working area = Manual grinding device for small shank drills, current grinding wheel Ø 120 x 30 mm; mounting Ø 32 mm; speed 3000 rpm; with grinding rest Right working area = Swivel device for tapered shank drills; cup grinding wheel currently Ø 160 x 30 mm; mounting Ø 32 mm; speed 3000 rpm Cutting angle for 2-fluted drills max 180°, for 3-fluted drills 120° Relief angle 5° - 9°; drill diameter 8 - 40 mm, possible grinding types e.g.: standard grinding, cross-point (DK) grinding, centering grinding, spiral grinding, step drill grinding Machine lighting available *

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over sub-slide: 138 mm Swing diameter over sub-slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm, 8-step, stepless Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total power requirement: 7.0 kW Nksdovbhv Ropfx Abvsw Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Primarily used for back-turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitches). Back-turning and relief grinding can be performed from the front, rear, and along the machine axis. Main drive through an 8-speed manual gearbox. Feed gearbox is a 12-speed manual gearbox. Swivel range of sub-slide = 360° Swivel range of cross-slide = 360° Chuck is a cone plate Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm ARBAH-L 3+1 measuring system FRENIC 5000G11 inverter 3-jaw chuck Ø 250 mm in good condition.

Kondisi: bekas, Technical Details: Number of spindles: 4 Drilling capacity in steel (diameter): 30 mm Drilling stroke: 200 mm Drill spindle Morse taper: MT3 Spindle outreach: 350 mm Spindle distance, center to center: 490 mm Spindle head adjustment: 500 mm Feed rate: 0.07; 0.15; 0.25; 0.33 / 4-step mm/rev Feed: manual and automatic Spindle speed: 70 ... 1,600 / 8-step rpm Distance spindle/table: max. 430 mm Distance spindle/table: min. 180 mm Table surface: 1820 x 400 mm Table adjustment: 250 mm with handwheel Total power requirement: 10.8 kW Machine dimensions (approx. LxWxH): approx. 1.0 x 2.1 x 2.8 m All spindle heads with clockwise and counterclockwise rotation Drilling heads 1 to 3: clockwise and counterclockwise rotation without threading function Nkodpfxju Idt Nj Abvsw Drilling head 4: with automatic threading function, Röhm chuck up to Ø 33 mm All drilling heads and the table are height-adjustable. Equipment: Coolant supply internal diameter (i.d.)

Kondisi: bekas, en Nedpfx Abou Ng Npovjkw

Kondisi: bekas, Technical Details: Njdpfeu Icqyex Abvskw Shearing capacity: 1 mm Max. round blank diameter: 1000 mm Shearing capacity: 1 mm Max. round blank diameter: 1000 mm Approx. machine weight: 0.2 t Approx. machine dimensions (LxWxH): 2.0 x 0.5 x 1.4 m Application: manual cutting of round steel sheet parts Upper blade: Ø 69 mm x 11 mm; vertical adjustment 25 mm via hand lever Lower blade: Ø 74 x 15 mm; adjustment: NO = fixed Centering fixture with die The material is manually positioned using a hand grip: vertical stroke 15 mm, horizontal travel 500 mm, manual operation.

Kondisi: bekas, en-GB Nedpfou Idugox Abvokw

Kondisi: bekas, Tahun pembuatan: 1981, en-001 Nkjdpfx Abju Nc Hkjvsw

Kondisi: bekas, Technical details: z-axis travel: 400 mm Spindle speed range: up to 3,000 rpm, stepless Feed, stepless: not specified Quill stroke, vertical: 100 mm Spindle taper: MT2 Table surface: 445 x 315 mm Distance table to spindle underside: max. 520 mm Table travel (longitudinal): 250 mm Table travel (cross): 330 mm Table height above floor: 920 mm Total power requirement: 1.6 kW Machine weight approx.: 1,500 kg Nkjdpfx Absv A S Efjvow Machine dimensions LxWxH: 1.3 x 1.1 x 2.0 m Application: Milling and drilling of elongated holes Fine depth indicator gauge mounted on the drilling spindle head. 5x T-slots according to DIN 650: a=10; h=18; b=18; c=8 mm Equipment: Two-axis digital display ACU-RIDE

Kondisi: bekas, Technical details: Pressing force: 40 t Throat depth: 365 mm Distance table/ram: 800 mm Ram stroke – max.: 500 mm Ram return speed: 0.45 m/sec Ram advance speed: 0.10 m/sec Ram surface: 450 x 360 x 74 mm Table surface: 630 x 500 x 73 mm Through-hole in table: Ø 205 mm Table height above floor: 720 mm Total power requirement: 13.0 kW Machine weight approx.: 3.2 t Machine dimensions approx. LxWxH: 1.7 x 1.1 x 3.0 m Additional technical features: -Braking time: 443 ms -Braking distance: 9 mm Nkjdpfx Absu Nfuqjvjw -Last machine inspection: May 2020, valid for 1 year

Kondisi: bekas, Tahun pembuatan: 2004, technische_details_schweisstisch Nsdpfou Nkxuox Abvskw