Beli Wmw F Heckert bekas (462)

Kondisi: bekas, Technical details: X-axis travel: 1000 mm Kfsdpfxsv Sz Dio Aahea Y-axis travel: 350 mm Z-axis travel: 400 mm Distance from column to table edge: min. 150 / max. 550 mm Spindle speed range: 28 - 1400 rpm / 18 steps Tool holder: SK40 Spindle head swivel: left/right 90°, forward/backward 45° Feed rate (X/Y axis): 16 - 800 mm/min / 18 steps Table size: 1600 x 400 mm Clamping surface: 1400 x 330 mm Total power requirement: 14.5 kW Approx. weight: 4000 kg Machine dimensions (LxWxH): approx. 2.0 x 2.4 x 1.85 m Horizontal milling machine, retrofitted with vertical milling head *

Kondisi: bekas, Tahun pembuatan: 2001, translate-001 Kedexna Uzjpfx Aahefa

Kondisi: bekas, Technical details: Drilling capacity in steel (diameter): 22 mm Throat depth: 205 mm Drilling stroke: 100 mm Spindle taper: MT2 Spindle speed: 2-step rpm Feed: manual mm/rev Max. distance spindle/table: 150 - 600 mm Base plate clamping surface: 350 x 400 mm Table clamping surface: 360 x 280 mm Table rotatable: 360° Table height adjustment: 450 mm with hand crank Column diameter: Ø 100 mm Control voltage: 380 V Ksdpfsvxf Irjx Aahofa Total power requirement: 0.8 kW Machine weight approx.: 270 kg Machine dimensions (LxWxH): approx. 0.6 x 0.5 x 1.95 m Column drilling machine incl. machine vice. In stock.

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over sub-slide: 138 mm Swing diameter over sub-slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Kodpevbhv Rofx Aahofa Spindle speeds: 1.8 - 450 rpm, 8-step, stepless Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Primarily used for back-turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitches). Back-turning and relief grinding can be performed from the front, rear, and along the machine axis. Main drive through an 8-speed manual gearbox. Feed gearbox is a 12-speed manual gearbox. Swivel range of sub-slide = 360° Swivel range of cross-slide = 360° Chuck is a cone plate Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm ARBAH-L 3+1 measuring system FRENIC 5000G11 inverter 3-jaw chuck Ø 250 mm in good condition.

Kondisi: bekas, en-GB: Technical details: Sheet width: 1000 mm Sheet thickness: 1 mm Upright width: 1220 mm Blade length: 1030 mm Stroke adjustment - Upper beam: 100 mm Stroke adjustment - Bending box: 45 mm Max. bending angle: 140° Machine weight approx.: 0.65 t Machine dimensions approx. LxWxH: 1.8 x 0.6 x 1.1 m The folding bending machine is equipped with two rear supports. Size of the round bar support = Ø 25 x 750 mm with linear scale – left side with counterweight fr-FR: Détails techniques : Largeur de tôle : 1000 mm Épaisseur de tôle : 1 mm Largeur entre montants : 1220 mm Longueur de la lame : 1030 mm Réglage de la course - traverse supérieure : 100 mm Réglage de la course - tablier de pliage : 45 mm Angle de pliage max. : 140° Poids de la machine env. : 0,65 t Dimensions de la machine env. Lxlxh : 1,8 x 0,6 x 1,1 m La plieuse à tablier pivotant est équipée de deux butées arrière. Dimension du support en acier rond = Ø 25 x 750 mm avec règle graduée linéaire – côté gauche avec contrepoids pl-PL: Dane techniczne: Szerokość blachy: 1000 mm Grubość blachy: 1 mm Rozstaw stojaków: 1220 mm Długość noża: 1030 mm Regulacja skoku – belka górna: 100 mm Regulacja skoku – wanienka do gięcia: 45 mm Maks. kąt gięcia: 140° Waga maszyny ok.: 0,65 t Wymiary maszyny dł. x szer. x wys.: 1,8 x 0,6 x 1,1 m Kedju Ibz Rspfx Aahofa Krawędziarka segmentowa wyposażona jest w dwa tylnie podtrzymania. Wymiary podtrzymki prętowej = Ø 25 x 750 mm ze skalą liniową – lewa strona z przeciwwagą

Kondisi: bekas, Technical Details: Number of spindles: 4 Drilling capacity in steel (diameter): 30 mm Drilling stroke: 200 mm Drill spindle Morse taper: MT3 Spindle outreach: 350 mm Spindle distance, center to center: 490 mm Spindle head adjustment: 500 mm Feed rate: 0.07; 0.15; 0.25; 0.33 / 4-step mm/rev Feed: manual and automatic Spindle speed: 70 ... 1,600 / 8-step rpm Distance spindle/table: max. 430 mm Distance spindle/table: min. 180 mm Kfedpfx Aaou Idt Njhoa Table surface: 1820 x 400 mm Table adjustment: 250 mm with handwheel Total power requirement: 10.8 kW Machine dimensions (approx. LxWxH): approx. 1.0 x 2.1 x 2.8 m All spindle heads with clockwise and counterclockwise rotation Drilling heads 1 to 3: clockwise and counterclockwise rotation without threading function Drilling head 4: with automatic threading function, Röhm chuck up to Ø 33 mm All drilling heads and the table are height-adjustable. Equipment: Coolant supply internal diameter (i.d.)

Kondisi: bekas, en1-Technical Details: Travel path – Y-axis: Saddle on beam: 200 mm Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° each Quill stroke: 80 mm Speed range: 90 - 900 / 5 steps rpm Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table mounting surface: Attachment area: 760 x 200 mm Table clamping area: 630 x 200 mm Max. table load: 100 kg X-travel: table longitudinal: 320 mm Z-travel: table vertical: 350 mm Table swivels +/-: left/right 30° each Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table feed: Infinitely variable 14 - 71 mm/min Total power requirement: 4.0 kW Weight approx.: 1,200 kg Machine dimensions (LxWxH) approx.: 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital readout for X and Y axes. Swiveling work spindle. Feed operates via variator gearbox. Swiveling table. Spindle rotational speed via 3-stage gear and 2-stage electric selection. Coolant system. Milling beam extendable by approx. 350 mm. Kedpeu Ndb Aefx Aahofa The machine vice is recommended but not included in the scope of delivery. Can be purchased as an optional extra. *

Kondisi: bekas, Tahun pembuatan: 1986, Technical Details: Swing diameter over bed: 315 mm Kfsdpfeu Ix Hqex Aahoa Swing diameter over support: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over cross-slide: 200 mm Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 / only 6 step left-right rpm Feed range x - direction: longitudinal: 0.02..0.8 m/min Feed range y - direction: cross: 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel: longitudinal slide = 580 mm and cross slide = 170 mm - incl. tool rest - incl. change gears - Fixed steady Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm) Our sale is as described.

Kondisi: bekas, Technical details: Pressing force: 2.3 t Stroke: 280 mm Kfodju Nfwlspfx Aahja Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Shut height with bolster plate/ram up: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Through-hole in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Taper hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total power requirement: 1.1 kW Machine weight approx.: 0.5 t Machine dimensions (LxWxH): approx. 0.6 x 0.7 x 1.6 m Press with mechanical 2-hand operation. Pressure test performed up to 2.3 t. Good condition.

Kondisi: bekas, Technical details: Kfsdpfx Aeu Ngn Seahea Grinding length: 1000 mm Grinding width: 315 mm Workpiece height: 390 mm Table speed: 2.5–25 m/min Table clamping surface: 250 x 1000 mm Distance table to spindle center: 550 mm Grinding wheel dimensions: max. Ø 315 x 13–63 x bore Ø 75 mm Control voltage: 220 V / 50 Hz Total power requirement: 10.5 kW Machine weight approx.: 5.0 t Machine dimensions approx. (LxWxH): 3.35 x 1.5 x 2.10 m The machine is currently located in the technical department.

Kondisi: bekas, en Kodpfxou Ng Nps Aahjfa

Kondisi: bekas, Technical details: Table length: 1000 mm Table width: 1000 mm Approx. machine weight: 0.531 t Approx. space requirement: 1.0 x 1.0 x 0.8 m Kedpfx Aaeu Nkkkohefa The scribing plate is mounted on a sturdy welded construction made of 60 mm steel angle.

Kondisi: bekas, Technical details: Plate length: 660 mm Kjdpfx Asu Nkpyoahefa Plate width: 450 mm Plate height: 70 mm Pass-through opening in the table: Ø 115 mm Machine weight approx.: 111 kg Required space approx.: 660x450x70 mm Pass-through hole: 115 mm T-slots: according to DIN 650 and 508 - a = 22 mm - b = 38 mm - h = 40 mm - c = 17 mm

Kondisi: bekas, Tahun pembuatan: 1991, Technical Details: Pressure: 160 t Stroke: 500 mm Throat depth: 360 mm Ram stroke - max.: 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Kjdpfx Aajw D Awmjhjfa Through-hole in table: 4x D=62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Machine dimensions approx. LxWxH: 2.1 x 1.4 x 3.4 m

Kondisi: bekas, Technical details: Width: 190 mm Kedpou S Hzuefx Aahofa Depth: 315 mm Height: 500 mm Approx. machine weight: 60 kg 1 piece (positioned at the rear in the photo) T-slot to DIN 650: T-slot width a = 28 mm; h = 42 mm; b = 47.5 mm; 19.5 mm, T-slot spacing 160 mm

Kondisi: bekas, Technical details: Width: 500 mm Depth: 260 mm Ksdpfx Aou S H Nlsahefa Height: 795 mm Approx. machine weight: 320 kg per unit 2 units available (price per unit) without T-slots Base clamping slot (long hole): Ø 39 x 130 mm

Kondisi: bekas, Technical details: Width: 625 mm Depth: 520 mm Height: 820 mm Approx. machine weight: 300 kg per unit 2 units available (price per unit) Kodpfx Aeu S H Stsahjfa without T-slots Long hole Ø 33 x 330 mm *

Kondisi: bekas, en001 Kfodpfju Nurfjx Aahoa

Kondisi: bekas, Tahun pembuatan: 1980, Technical details: Pressing force: 400 t Stroke: 40 - 140 mm Continuous strokes/min: 32 Throat depth: 400 mm Installation height min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate (LxWxH): 1260 x 760 x 100 mm - With drawing device, force 250 kN, stroke approx. 83 mm - Operation via control panel Kjdpfx Aou N A Uusahjfa - No UVV (accident prevention regulations) - As is

Kondisi: bekas, Technical details: Ksdpfxou N Dhie Aahjfa Plate length: 800 mm Plate width: 455 mm Plate height: 75 mm Approx. machine weight: 264 kg Transport dimensions (LxWxH): 800 x 455 x 250 mm Ram plate removed from a PYE 160S press - with central through-hole Ø 40 mm - with 6x pitch circle holes Ø 16 mm, pitch circle Ø 160 mm - diagonal T-slot according to DIN 650 (a = 19 mm; h = 25 mm; b = 38 mm; c = 16 mm) - with support plate underneath = spacing approx. 410 mm

Kondisi: bekas, Technical details: Kfsdpfx Aou N Dyrjahea Plate length: 1100 mm Plate width: 700 mm Plate height: 85 mm Approx. machine weight: 430 kg Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48; c=24mm; Center distance 76mm

Kondisi: bekas, Technical details: Width: 350 mm Depth: 120 mm without plate Height: 315 mm without plate 3 units available with base plate (A+B+C) 1 unit available without base plate (D) Kfsdpfx Aaju N Eczohoa Dimensions of the base plate: W: 350 x D: 320 x Thickness: 30 mm Price per unit

Kondisi: bekas, Technical details: Faceplate diameter: 800 mm Width: 140 mm Weight: 330 + 50 kg This faceplate does not include clamping claws. Clamping is done using the corresponding clamping plate Ø 790 x 26 mm. The clamping slots, each 300 mm in length, are arranged radially. T-slots according to DIN 650: a = 22 mm; h = 37 mm; b = 40 mm; c = 17 mm Flange mounting: Mounting surface external Ø 410 mm and internal Ø 195 mm 6x clamping bolts on a bolt circle Ø 235 mm Clamping plate: 4x through holes Ø 20.5 mm arranged on a bolt circle Ø 630 mm Various clamping holes M20 / M16 and M12 arranged in different positions Equipment: Kfjdpfx Aasu N E Anohoa 4 pieces of clamping screws M20 with clamping straps

Kondisi: bekas, Technical details: Machine weight approx.: 160 kg Machine dimensions (LxWxH) approx.: 0.58 x 0.50 x 0.3 m Swiveling: no Rotary movement: 360 degrees Application: For auxiliary tasks, e.g., marking out divisions Kfjdpfx Aaju N E Dxshja - Dividing head with clamping chuck Ø 370 mm with external 4-jaw clamping - Pitch circle with 15/16/17/18/19/20 divisions, 360°; 360° rotation - 360° rotation via radial scale

Kondisi: bekas, Technical details: Kodpfx Aju R A A Uoahjfa Plate length: 640 mm Plate width: 330 mm Plate thickness: 65 mm T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9 mm; b=24.2 mm; c=9.8 mm; h=19.9 mm