Beli Zimmer Galva 4 bekas (58.973)

Kondisi: baik (bekas), Tahun pembuatan: 2005, panjang total: 4.200 mm, lebar total: 2.500 mm, tinggi total: 1.800 mm, tinggi produk (maks.): 4 mm, berat keseluruhan: 7.000 kg, Cutting capacity 4 mm, cutting length 3050 mm, throat depth 350 mm, motor 18.5 kW, motorized backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions 420x250x180 cm, approx. 6500 kg Nkedotp I S Aopfx Abvsw

Kondisi: baru, Zimmer MBPS3502DS1 troli rem JF550AB dengan pemandu rel profil, daya tahan 2100N, belum terpakai dalam kemasan asli, 100% berfungsi, pengiriman sesuai foto. Nkjdpfox Evcrsx Abvew

Kondisi: baik (bekas), Turntable Nkjdpfsuhn Dcsx Abvjw

Kondisi: baik (bekas), ALLOYD manufacture Type: 4 seec Nkedpfx Asuhn Disbvew Rotary table

Kondisi: bekas, Diese Anzeige bezieht sich auf den LABCOLD RLDF1520 Klimaklasse 4 Kühlschrank. Das Gerät befindet sich in einwandfreiem Zustand und ist sofort einsatzbereit. Der LABCOLD RLDF1510 ist ein apotheken- bzw. impfstoffgeeigneter Kühlschrank, ausgelegt zur Lagerung temperatursensibler Arzneimittel, Impfstoffe oder biologischer Materialien. Wesentliche technische Daten und Merkmale: Merkmal Spezifikation / Detail Kapazität: ca. 430 Liter Außenmaße (H × B × T): 1860 mm × 600 mm × 700 mm Temperatur-Arbeitsbereich: +2 °C bis +8 °C (nominaler Betrieb ~5 °C) Steuerung/Überwachung: „IntelliCold™“-Regler, 24/7 Temperaturaufzeichnung, Alarme (Über-/Unterschreitung, Tür offen, Stromausfall) Isolierung/Konstruktion: Gehäuse aus emailliertem Stahl, innen korrosionsgeschütztes, lackiertes Aluminium; Umluftkühlung mit Lüfter; automatische Abtauung im Aus-Zyklus Türtyp: massive Tür (keine Glastür) Weitere Merkmale: Türschloss mit Schlüsseln, Zugang für Temperatursensor, Fernalarm-Kontakte, Datenspeicherung (13 Monate) Njdpfx Asxhdthebvokw Stromverbrauch: typischerweise ca. 5,52 kWh/24h (bezogen auf ein 440L-Modell/ähnliches Modell) Zusammenfassend handelt es sich um einen robusten, nach Vorschrift gefertigten Kühlschrank für den Einsatz in der Kühlkette (d. h. zur Aufbewahrung von Medikamenten, Impfstoffen und biologischen Produkten) und nicht für den allgemeinen Haushalts- oder Lebensmittelgebrauch.

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 2.640 h, Fungsionalitas: berfungsi sepenuhnya, daya: 44 kW (59,82 hp), kebutuhan udara: 2.150 m³/jam, Mobile vacuum unit VacTrailer S-4 Diesel Kubota diesel engine 44 kW Rotary lobe vacuum pump max. air conveying capacity 2,150 m³/h max. vacuum 500 mbar Collection volume 500 liters Pocket filter 12 m² Pneumatic AirShock® filter cleaning Safety cartridge filter 7.5 m², dust class M Version B1, ignition source-free design Paint finish for suction unit Color: Wieland Blue, similar to RAL 5015 Big Bag securing With hooks and lashing straps (35 mm) for securing Big Bags (not suitable for lifting) Big Bag holder For flat gate valve mounted on the filter separator, incl. venting device Flat gate valve DN 300, manually operated Suitable for free-flowing or crumbly vacuumed material Supports for filter separator (2 units) Required for payloads over 800 kg up to max. 1,200 kg Incl. support holders integrated in trailer frame Trailer for road use (2,500 kg) 100 km/h approval, height-adjustable drawbar, tandem axles, galvanized frame Removable lighting bar, electrical connection 12/24 V, eyelet and ball head coupling Assembly of the vacuum unit on trailer Incl. TÜV inspection, 2-stage adjustable rear supports Control extension for level indicator For connecting a mobile pre-separator, incl. Harting socket at S4 control unit Short pipe, galvanized steel 1 × DN 125 SK-M / 1 × DN 100 SK-V Pocket filter, polyester needle felt Membrane-coated, 6 m², 9 pockets Fine filter cartridge, dust class M Filter area 7.5 m² Electric hydraulic system Electric hydraulic pump with all control units Nkedpfjxn Ru Sex Abvow for lifting and lowering the collection container for opening and closing the discharge slide

Kondisi: baru, de-stangenware-verfuegbar Tragfähigkeit: 240 kg Maximale Plattformhöhe: 4 m Personenzahl: 1 Plattformabmessung: 1,15 x 0,6 m Gesamtlänge: 1,32 m Gesamtbreite: 0,76 m Gesamthöhe: 1,92 m Plattform-Ausschub: 0,55 m Traglast Ausschub: 100 kg Hub-/Senkzeit: 34 / 25 Sek. Wendekreis: 0 Nodpsulah Njfx Abvskw Maximale Neigung: 1,5°/2° Antriebsräder: 230 x 80 mm Steigfähigkeit: 25 % Radstand: 1,0 m Fahrgeschwindigkeit (eingefahren): 4 km/h Fahrgeschwindigkeit (ausgefahren): 0,5 km/h Batterie: 2 x 12 V / 100 Ah Hubmotor: 24 V / 1,3 kW Fahrmotoren: 24 V / 0,5 kW Ladegerät: 24 V / 15 A Eigengewicht: 660 kg Proportionalsteuerung Automatischer Schlaglochschutz Fahrbar in voller Höhe Nicht-markierende Reifen Automatische Bremsanlage Notabsenksystem Not-Aus-Taster Lasthalteventil Borddiagnosesystem

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20369, lebar meja: 400 mm, panjang meja: 570 mm, model controller: POCON 60, berat kosong: 6.000 kg, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Batas waktu pembayaran untuk mesin adalah 20.11.2025! Penawaran mengikat Anda untuk melakukan pengambilan tepat waktu antara 01.12.2025 dan 05.12.2025! DETAIL TEKNIS Lebar meja: 400 mm Panjang meja: 570 mm Ukuran magnet: 260 x 150 mm Kontrol: POCON 60 DETAIL MESIN Tegangan operasi: 400 V Frekuensi: 50 Hz Koneksi: 5 kVA Dimensi & Berat Dimensi: 3.500 x 3.000 x 2.600 mm Berat: 6.000 kg PERLENGKAPAN Nksdpfx Aoxm Sf Nsbvjw 4 alur Sistem penjepit Pelat penjepit magnetik Sistem pergantian elektroda ZIMMER + KREIM Pemegang elektroda Penukar elektroda 50 posisi Sistem penyimpanan dengan berbagai pelat penjepit 2 troli alat dengan elektroda dan sistem penjepit yang sesuai

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay distance - Incl. mounting hardware (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and system can be expanded at any time) - (*Larger quantities available: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Incl. mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation Nsdjd Tbbdspfx Abvjkw - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notice. The material is packed sensibly to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The ground must be concrete, level, suitable for doweling, and capable of bearing the imposed loads. The customer is responsible for verifying and ensuring ground conditions, load capacity, and any necessary official permits. Uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm upright top projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard Njdpfx Abjfdkb Tjvjkw - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Nksdsd Tqalepfx Abvow Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Nkedpfefdkb Uex Abvew Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Nsdpfx Absguk Dkevjkw Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Nkjdpfjfdkbhsx Abvjw Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. Nodpfxeguk Dve Abvokw The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, The price is for all together. Ideal for a new start on Screen Printing Art studio Nodpfx Aoxwnw Ajbvskw Artists The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER ALL ARE NEW , OUT OF THEIR BOXES.

Kondisi: bekas, Diameter various Quantity 40x Holder BT 40 Nkjdpfx Aeww Nblobvow

Kondisi: bekas, Tahun pembuatan: 2002, Sinker EDM machines Travel X: 350 mm Travel Y: 250 mm Travel Z: 315 mm Table size X: 576 mm Table size Y: 400 mm Max. workpiece weight: 500 kg C-axis Nodpovtfn Iefx Abvjkw Quill mounting: EROWA

Kondisi: bekas, Tahun pembuatan: 2000, Die sinking EDM machines Travel X: 825 mm Travel Y: 680 mm Travel Z: 405 mm Nksdpfxjvtfn Uo Abvjw Table size X: 1200 mm Table size Y: 850 mm Max. workpiece weight: 3,000 kg Electrode changer: 50 positions Generator: POCON 60 Ram holder: EROWA Heavy-duty adapter O-module Halogen lamp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Zimmer & Kreim Chameleon handling system with 360 storage positions Technical data as per original order confirmation Njdpjwypggefx Abvekw

Kondisi: hampir baru (bekas), Treif broodsnijmachine 4-24MM In goede werkende staat. Voor meer informatie graag een aanvraag sturen. Njdpfx Aoumpg Rjbvjkw

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), Four-sided planer/moulder HARBS, 8 heads. Long infeed table, 3 meters. Machine weight: 5,500 kg. Cardan shaft drive. Head configuration: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm. Nksdsl Dw Nxjpfx Abvew

Tahun pembuatan: 1980, Kondisi: bekas, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzów Wielkopolski Delivery conditions Collection by customer Delivery costs To be borne by the buyer Startup type To be agreed Description Nsdpfxjcw Dg De Abvokw Notes Automatic carbide-tipped circular saw grinder, hydraulic

Kondisi: sangat baik (bekas), CNC rotary table, Nikken 5AX-230, 4th and 5th axis for Mazak etc. Was installed on a VTC 300; now for sale due to upgrade to a new 5-axis machine. Nksdpfx Absp U Umkjvew

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: EAN0729389556525, panjang total: 34.000 mm, tinggi rak: 3.500 mm, panjang penyangga: 2.700 mm, panjang rak: 8.500 mm, tinggi rangka: 3.500 mm, beban per pasangan rangka atap (maks.): 3.000 kg, lebar rangka: 1.100 mm, jumlah baris rak: 4, ruang palet: 108 palet Euro, 4 rows of pallet racks (4 x M35112711-2) Each 8.5 m long, 3.5 m high, 1.1 m deep, Each with 3 bays, 2.7 m wide, Each with 2 beam levels, shelf load capacity 3000 kg. Scope of supply: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, assembly materials - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Nkodpsv Ukz Asfx Abvew Frames are bolted, not pre-assembled. Freight / Delivery: - Max. 20 working days after receipt of payment - Free delivery to site/construction location - Unloading from the truck is to be carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands). Deliveries to EU member states upon individual agreement.