Pusat pembubutan dan milling CNC

Nakamura-Tome Super NTMX

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 11 kW - Spindle speed: 4,500 rpm - Max. bar diameter: 65 mm - Max. machinable diameter: 200 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 11 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 51 mm - Max. machinable diameter: 200 mm - Minimum C-axis resolution: 0.001° - Travel: 780 mm - Distance between main and sub spindle: 980 mm TURNING-MILLING SPINDLE - X/Z travel: 570/1,297 mm - Y travel: +/- 100 mm - B-axis stroke: 190° (+/-95°) - Tool type: Capto C4 - Spindle speed: 12,000 rpm - Spindle drive power: 7.5 kW TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 48 (2x24) LOWER TURRET - Number of positions: 24 - X/Z travel: 130.5/658 mm - Driven tool speed: 6,000 rpm - Driven tool power: 7.1 kW ELECTRICAL SUPPLY - Supply voltage: 380 V WEIGHT AND DIMENSIONS - Footprint: 2,700 x 3,460 mm - Machine height: 2,857 mm - Machine weight: 14,500 kg MACHINE HOURS - Operating hours: 11,000 h ACCESSORIES - Control: Fanuc 31iA-5 - Coolant tank * High-pressure pump: 25 bar * Through-spindle coolant (IKZ) - Chip conveyor: right side - Spindle cooling - Bar feeder preparation Hsdpfx Alsuhamcj Iol - Electrical transformer - 3-jaw chuck: SCHUNK 215 / SCHUNK 165

Kondisi: baik (bekas), Tahun pembuatan: 2012, Suku cadang yang ditunjukkan dengan tangan tidak termasuk. X1020mm Y610mm Z610mm. 12.000 rpm, 25 kW, 160 Nm. Unit kontrol: HEIDENHAIN iTNC 530. Sumbu keempat akan dikirim tanpa suku cadang yang ditunjukkan dengan tangan. Hodex Awzbjpfx Al Isl

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 8.800 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NL2561708843, jumlah spindel: 2, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length (mm): 705 max. Turning diameter (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool magazines Tool positions: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5/4.9/4.2 (3 min / 5 min / cont) Rapid traverse (m/min): 30 Main spindle Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5/18.5/15 (25% DC / 50% DC / cont) Max. torque (Nm): 49 Counter spindle Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11/7.5 (25% DC / cont) Max. torque (Nm): 22 Counter spindle travel (mm): 734 Cooling system Tank capacity (liters): 366 Equipment Chip conveyor Signal beacon Machine operating time: Power-on hours: 19,393 Cutting time: 8,800 Nominal power rating (kVA): 48 Base machine: Dimensions / Weight Hedpfxeyzxcgs Al Iel Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 Illustrated tools, driven tools, and both chucks are not included in the scope of delivery.

Kondisi: diremajakan ulang (bekas), Measuring ranges X/Y/Z = 900 x 1200 x 850 mm Measuring uncertainty 4.0 + 4.5L/1000 (in original condition; currently significantly improved after modernization) Completely modernized in 2018 with Pantec Controller Eagle Pro Hsdpfx Aedpak Rsl Isl Probe system: Renishaw PH10MQ with SP25M Entirely new Inca Premium software (alternative software available on request) HP Workstation PC Optional: Laser scanner (e.g. Kreon) Probe changer Rotary table, etc.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC turning and milling center (multi-function machine) | Make: MAZAK Model: INTEGREX e-650H II | Year of manufacture: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 10.03.2026): - Total: 91,430 h - Auto operation: 52,054 h - Automatic machining: 38,974 h - Manual machining: 31,316 h TECHNICAL DATA: Working area: - Max. swing diameter: 920 mm - Max. swing diameter over tool slide: 920 mm - Max. turning diameter: 1,100 mm Main spindle: - Max. speed: 1,600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1,000 rpm) - Spindle nose: A2-11" - Spindle bearing inner diameter: 220 mm - Rated power (30 min. operation / 100% continuous operation): 45.0 / 37.0 kW - Max. torque: 4,500 Nm Programmable tailstock: - Taper: MT 6 Milling spindle: Hjdpsyuq Dzefx Al Isl - Turret type: Single spindle with ATC - Tool holder: steep taper 50 - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis indexing increments: 0.0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10,000 rpm - Milling spindle motor, AC: 37 kW Travel paths: - X-axis: 1,025 mm - Y-axis: 650 mm - Z-axis: 6,423 mm - B-axis swivel range: 240° Dimensions: - Spindle center height: 1,350 mm - Length: 13,267 mm - Width: 3,938 mm - Height: 3,920 mm - Weight: 41 t Additional information: - Rated power (100% continuous operation): 99.5 kVA Automatic tool changer: - Number of tools: 120 positions, SK50 DIN 69871 EQUIPMENT / SPECIAL ACCESSORIES: - Numerical control: MAZATROL MATRIX - Additional, very good special equipment ... - Documentation - CE marking No guarantee for completeness and accuracy of the technical information and equipment. - Subject to prior sale - Detailed technical datasheet and information about equipment available upon request.

Kondisi: bekas, Tahun pembuatan: 1969, Translation of technical listing for export platforms: Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: -- mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Required space approx.: -- m D I S K U S Vertical double-sided surface grinding machine in C-frame design with rotary workpiece feed system Model: DDS 600 CRA Year of manufacture: 1969 Serial No.: 6672 _____ Grinding wheel diameter x bore (each): 600 x 150 mm Grinding wheel width approx.: 60 mm Workpiece transport disc, outer Ø: 810 mm Workpiece: Max. grinding height x width: approx. 60 x 120 mm Vertical quill adjustment (each): approx. 150 mm Hydraulic infeed impulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Feed rate for rotary device, steplessly adjustable: 14 – 145 mm/s Grinding wheel speed (each): (24 m/s) / 765 rpm Grinding spindle drive (each): 22 kW Hodpfx Aet Hw N Hel Ijl Total drive: approx. 50 kW / 380 V / 50 Hz Total weight: approx. 7,000 kg Accessories / Special Features • Rotary workpiece fixture for round transport discs with equipment slots for part placement and automatic ejection of finished parts onto a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height, including (if needed) automatic hydraulic grinding wheel advance • Stepless speed regulation of rotary feed device dependent on grinding requirement and workpiece dimensions • Manual infeed of grinding wheels via push buttons • Hydraulically swiveling dressing device (RA) between the two wheels for simultaneous dressing of both grinding wheels, with appropriate compensation and automatic repositioning to effective workpiece thickness after dressing = significant time savings; can be activated manually or via timer • Ammeters for both grinding spindle drives • Central lubrication • Mechanical workpiece height control with machine shut-off in case of overheight • Free-standing control cabinet, separate hydraulic unit, large separate belt filter system, various grinding wheels, several transport wheels, etc. This machine is particularly suited to simultaneous, parallel-surface grinding of workpieces in large-scale production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – ready for demonstration shortly Delivery: ex-stock, as inspected Payment: strictly net, after receipt of invoice.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, doosan-puma-2600lmb-2014-cnc-lathe-with-live-tooling-and-c-axis- 1-350-mm-z-travel-fanuc-i-series-cnc-10-4%E2%80%9D-color-lcd-ez-g uide -swing-over-bed-780-mm -swing-over-cross-slide-630-mm -maximum-turning-diameter-376-mm -maximum-turning-length-1-245-mm -travel-x-260-mm--z-1-350-mm -chuck-diameter-380-mm -bar-capacity-102-mm -spindle-nose-asa-a2-11 -turning-spindle-2-800-rpm-22-kw -driven-turret-12-stations-bmt-65p*-indexing-1-station-0-25-sec -driven-tool-power-5-5-kw-5-000-rpm -c-axis-indexing-0-001-mm -tailstock-quill-diameter-stroke-100-mm-100-mm Hedpfxsyb Srye Al Isl included-equipment: -3-jaw-hydraulic-chuck-samchully-hch-15%E2%80%9D-380-mm-dia -c-axis-360%C2%B0-0-001%C2%B0-increment -automatic-tool-presetter -integrated-tailstock -high-pressure-coolant-pump -chip-conveyor -preparation-base-and-logic-for-steady-rest -hydraulic-steady-rest-smw-autoblok-slu-3-1-20-165-mm -set-of-tool-holders -doosan-and-fanuc-manuals-set condition: machine-in-good-condition-can-be-inspected-under-power-immediate -delivery

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 7.600 h, Fungsionalitas: berfungsi sepenuhnya, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)* Kategori: Pusat Pemesinan Vertikal (VMC) No. Referensi: 311119 Kapasitas: 700 x 400 x 330 mm Tahun Pembuatan: 2000 Spesifikasi Teknis: Hodpfxsx Ehi Is Al Ijl SPINDEL Taper Spindel: BT 30 Kecepatan Spindel: 8000 RPM Motor Spindel: 3,7 / 5,8 kW KAPASITAS KERJA Gerak (XYZ): 700 x 400 x 330 mm Rel Pemandu: LM ATC Kapasitas Ganti Tool: 14 tool CNC Kontrol: Fanuc 16iM Detail Tambahan: Dengan Nikken 170 sumbu ke-4

Kondisi: baru, Tahun pembuatan: 2026, Swing diameter over bed 554 mm Swing diameter over cross slide 370 mm Turning length 2000 mm Hjdewyd Tnopfx Al Iol Centre height 280 mm Spindle bore 104 mm Drive power 11 kW - New machine - with 2-axis digital readout ACU-RITE incl. constant cutting speed, MULTIFIX quick-change tool post size MC * For more information regarding the exact standard equipment and available options, visit our website or contact us directly *

Tahun pembuatan: 1992, Kondisi: bekas, Grinding height: 50 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Total power requirement: 85 kW Machine weight approx.: 9,500 kg D I S K U S CNC-controlled vertical double-sided surface grinding machine with rotary workpiece feed and IONIC measuring control system. Model: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel diameter: each 600 x 150 x 75 mm (height) Workpiece data: Grinding height approx.: 1.5 – 50 mm Hsdpfxot Hw Nas Al Isl Grinding width approx.: 20 – 120 mm Vertical quill adjustment, each approx.: 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed, continuously variable: 40 – 235 mm/sec Grinding wheel speed each (30 m/s): 191 – 955 rpm Grinding spindle drive, infinitely variable: each 37 kW Total drive approx.: 85 kW / 380 V / 50 Hz Weight approx.: 9,500 kg Accessories / Special equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (infeed top and bottom, dresser, and workpiece rotary table), direct input of all grinding data, and in combination with: • IONIC measuring system no. 17A with 2 probes for scanning the workpieces after the grinding process, triggers appropriate infeed of the grinding wheels, ongoing measurement results displayed on monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for drive motors and grinding wheel speed • Portal design for higher stability and precise grinding results • Rotary workpiece transport with continuously variable speed as fourth axis • Position monitoring device for supervising the position height of the lower grinding wheel • 2 adjustable workpiece hold-down devices at infeed and outfeed, height monitoring, simple raw part stacking device, and finished parts removal by conveyor belt • Angled, side-mounted dressing device with programmable dressing cycle, CNC axis integrated into the control unit, with safety cut-off • Large separate control cabinet, automatic central lubrication, sophisticated pneumatic system • Large PROMATEC (F) coolant system with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction unit, etc. This machine is particularly suitable for simultaneous, perfectly parallel grinding of workpieces in large batches such as stamped parts, piston rings, hydraulic components, etc. Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This is a very rare opportunity in terms of both condition and price. Should you require another grinding machine – particularly from DISKUS – please send us your inquiry.