Mesin blow molding

Nissei ASB 70DPHT

Kondisi: bekas, Tahun pembuatan: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details - Output: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck finish: 29/25 - Operating hours: 47,000 - The machine has been regularly maintained Machine equipped with: - Sidel elevator for preforms to unwinder - Sidel preform unscrambler & feed system Bwedpfx Aerkgy Uja Toi - Sidel oven & blowing station for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), Two complete injection molding production lines are available, each with a Husky injection molding machine, five complete molds, an all-metal separator, Motan gravimetric blending system, and crane system. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s–12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s–15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s–11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s–14s. 6) 48-cavity H-PET-AE mold. Total system dimensions (L/W/H): approx. 24m / 13m / 5.5m. Includes drying unit, mold dehumidification, color dosing equipment, and T-conveyor belt. Documentation available. On-site inspection is possible. Bjdpfow Az Risx Aa Towi

Kondisi: bekas, Tahun pembuatan: 1992, Automatic PET Bottle Stretch Blow Moulding Machine Manufacturer: SIDEL Model: SBO 4 S1 Year of manufacture: 1992 Output capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Included: 1.5 L moulds Preform feeder Technical condition: used machine, operational, program functioning properly Bedpjwa Rhrofx Aa Towi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, jam operasional: 60.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.000 kN, diameter sekrup: 120 mm, jarak antara tiang: 1.120 mm, diameter kolom: 180 mm, volume langkah: 5.430 cm³, Perlengkapan: dokumentasi / manual, Машината е готова за товарене. 900-тонна сила на затягане, оборудвана с робот за изваждане, сушилня за бункер, товаро-подател за бункер, дозиращо устройство за мастербач. Първи и единствен собственик от производството. Цената е за товарене на камион. Bjdpfxoickd Ho Aa Tswi

Kondisi: baru, Parts for SIDEL blow molding machine Ball bearings O-rings Bwjdpfx Ajiqum Ija Tei Nozzle Belts Axle

Kondisi: baik (bekas), 10449 Bwjdpfx Aefdgq Sea Tsi

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Control system Fanuc 18i-T NC-controlled axes: 6 Country of origin: Japan Equipped with FMB mini turbo 2-16 / 3200 A bar feeder 3 m bar length Max. machining diameter: 16 mm Max. drilling capacity: 7 mm Max. tapping capacity: M6 Rapid traverse in X/Y/Z/ZB: 20/20/20 m/min Rapid traverse in A: 78.5 m/min Bjdpsxvbbfofx Aa Tewi Feed rate in X/Y/Z/ZB: 10/10/10 m/min Feed rate in A: 10 m/min Main spindle speed: 500 - 12,000 rpm Main spindle drive power at 100/40% duty cycle: 2.2 kW External tool stations: 6 Driven tool stations: 3 Backworking unit: Max. clamping diameter: 16 mm Max. part length: 85 mm Spindle speed: 500 - 8,000 rpm Counter spindle drive power: 0.55 kW Max. drilling capacity: 4 mm Max. tapping capacity: M3 Weight: 1,700 kg Dimensions (LxWxH): 2163 x 770 x 1650 mm Equipment & Accessories - C-axes on both spindles - Work lighting - Hydraulic unit - Coolant system - Compressed air system - Central lubrication - Door monitoring - Finished part discharge conveyor The machine was recently removed from production. Good condition.

Kondisi: bekas, Tahun pembuatan: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. A tilting device is used to unload preforms from a container into the preform feed hopper. From there, the preforms are conveyed via an ascending belt with electronically controlled speed and are delivered, via chute and loading starwheel, in a uniform orientation to the blow molding machine. The shape and size of the preforms are checked and defective preforms are ejected before they are fed to the heating ovens by a mechanical starwheel. In the heating ovens, the preforms are preheated with infrared lamps. For a symmetrical heat distribution, the preforms are continuously rotated during this process. Fans prevent overheating of the outer surface. Finally, preform temperatures are checked with an optical pyrometer. Grippers handle the loading and unloading of preforms to/from the blowing carousel. The blowing unit uses 'crocodile molds', where stretching along the longitudinal axis is assisted by a stretching rod. The preforms are then blow-molded into PET bottles. The stretch-blown bottles are removed from the cavities by grippers and conveyed to the discharge station. Machine (additional): Rotary blow molding machine Power: 58 kW Number of cavities: 8 Number of bottles discharged per stop: 202 Blowing pressure: 30 bar Voltage: 400 V Frequency: 50 Hz Bodpfx Aoxyktloa Tewi Water: 4 bar Compressed air: 360 Nm3/h at 7 bar Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Equipment: Preform feed hopper with tilting device for containers, ascending belt conveyor for preforms, preform inspection, heating ovens, blowing carousel, bottle discharge station, screen-based visualization Weight: 16,700 kg

Kondisi: sangat baik (bekas), Compressor type: dry-running Revolutions per minute: 750 Discharge pressure: 42 bar Bedpfewcgc Rsx Aa Tswi Displacement: Number of cylinders/stages: 2/4 Free air delivery: 7.73 m³/min; 464 m³/h Motor power: 90 kW

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), berat injeksi: 2.424 g, This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is a fully electric injection molding system with a maximum throughput of 390 kg/h PET and a maximum shot weight of 2,424 g PET. The clamping unit is fully electric with toggle drive and features an integrated control for peripheral devices. Take this opportunity to purchase the Husky HPETL230E-RSE95D-95 all-electric injection molding machine. Contact us for more information about this machine. Bjdpfsx D Hvwex Aa Towi Additional equipment: • Mold Dehumidifier: incl. hood, spare parts package, and piping • Conveyor belt: double-sided preform filling system for cartons/cages Machine Advantages Technical Machine Benefits • The package includes two machines as well as additional components such as pellet silos, pellet feed, contamination removal system for pellets, color dosing unit, and platform. Everything visible in the images is included. • Maximum throughput: 390 kg/h PET • Clamping unit: fully electric with toggle drive • Clamping plate: moveable, roller-guided • Type: split version • Dryer: DR815HT-G3 with 4,000-liter drying hopper (stainless steel, insulated) • Husky 1: 3 tools – 28-cavity neck ring, 17.8/26/30.3 grams • Husky 2: 2 tools – 38-gauge neck, 18/29 grams Additional Information Clamping Force Clamping unit: Fully electric with toggle drive Clamping plate: Moveable, roller-guided Control System Control: Integrated control system for peripheral devices Display for cooling water temperature/pressure (inlet and return) Control output for color dosing unit Lubrication system: automatic Re-mixing device: integrated in the nozzle Tooling: H-PET injection molds with 48 cavities Preform weight: 17.8 g and 30.26 g Core dimensions: 50 x 140 mm Includes: 3-position take-out plate, basic spare parts package H-PET injection mold with 32 cavities Preform weight: 18 g and 29 g (38 mm Bericap) Core dimensions: 63.5 x 140 mm Includes: 3-position take-out plate, basic spare parts package Functions: Temperature monitoring and setting Continuous level gauge Variable dew point setting Granulate conveying: Hot transport of granulate via P07 vacuum unit to HAD400 booster bin Color Dosing Units For solid color: Volumetric, 4 dosing screws For liquid color: 4 dosing pumps Preform Production Specifications Preform weight: 17.80 g Neck finish: PCO1881 LW Length: 89.35 mm Wall thickness: 3.06 mm Base: 2.30 mm Shape: Bell Cavities: 48 Cycle time: 12.4 ± 0.3 s Preforms per hour: 13,935 Annual production (95% availability): 111,205,000 Throughput (kg/h): 248 Power consumption: 506 Wh/kg PET Preform weight: 29.00 g Neck finish: Bericap 38 Length: 108.59 mm Wall thickness: 3.16 mm Base: 2.42 mm Shape: Bell Cavities: 32 Cycle time: 13.7 ± 0.3 s Preforms per hour: 8,409 Annual production (95% availability): 67,101,000 Throughput (kg/h): 244 Power consumption: 532 Wh/kg PET Preform weight: 18.00 g Neck finish: Bericap 38 Length: 82.04 mm Wall thickness: 2.70 mm Base: 2.20 mm Shape: Bell Cavities: 32 Cycle time: 11.3 ± 0.3 s Preforms per hour: 10,195 Annual production (95% availability): 81,353,000 Throughput (kg/h): 184 Power consumption: 506 Wh/kg PET Preform weight: 30.26 g Neck finish: PCO1881 LW Length: 122.30 mm Wall thickness: 3.00 mm Base: 2.30 mm Shape: Bell Cavities: 48 Cycle time: 14.7 ± 0.3 s Preforms per hour: 11,755