Pemadat limbah

Orwak TOM 1040

Kondisi: siap digunakan (bekas), Gaya tekan: sekitar 700 kN (sekitar 70 ton) Daya motor: sekitar 11 kW Fjdpfx Aasra Dddoqjpg Catu daya: 3 × 400 V / 50 Hz Berat satu bal: hingga sekitar 600 kg Dimensi bal: sekitar 1100 × 1100 × 1200 mm Dimensi mesin: sekitar 5,9 m panjang, 2,5 m lebar, sekitar 2,6 m tinggi Berat mesin: sekitar 7 ton Waktu siklus: sekitar 45–47 detik Fitur konstruksi - Bukaan pengisian besar untuk karton - Kemungkinan pengisian otomatis (misal: dengan konveyor) - Pengikatan kawat manual (4 kawat) - Pengunci palet dan pintu hidraulik untuk pengambilan bal Keunggulan mesin press ini - Bal besar, lebih sedikit transportasi - Gaya tekan tinggi - Dirancang untuk operasi kontinu Tahun produksi tersedia: 2016-2020

Tahun pembuatan: 1999, Kondisi: bekas, KAPAZITÄT 2000 kg HUBHÖHE 4,7 m & 5 m Fodpjwa I A Tofx Aaqopg ARM-LÄNGE 3,2 m 2 STÜCK

Kondisi: baik (bekas), Tahun pembuatan: 2002,

Kondisi: bekas, Clamping plate - table of a long planing machine - Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M 30 T-slot pitch: 263 mm Fedpfxjbn Amfo Aaqjpg Total length: 6230 mm Total plate height: 350 mm Weight: 11 t

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. Fsdpfsvf E Avox Aaqepg - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 25.000 h, jarak pergerakan sumbu X: 10.300 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.800 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, posisi kepala milling: 2.5 x 2.5 °, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 60 rpm, lebar meja: 3.300 mm, panjang meja: 12.000 mm, diameter pemasangan: 50 mm, tinggi total: 48.750 mm, lebar total: 100.000 mm, panjang total: 212.000 mm, berat keseluruhan: 100.000 kg, Duplex-Fräsen bestehen aus zwei Maschinen, die sich gegenüberstehen und entweder separat oder als Einzelmaschine betrieben werden können. Das Werkstück kann mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen wie einzelnen Fräsmaschinen Erhöhung der Fertigungsgenauigkeit durch Komplettbearbeitung des Werkstücks in einer Aufspannung (in den meisten Fällen) Eine einzige Bedienperson kann die Duplex-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition dank hoher Produktivität Die Duplex-Lösung ermöglicht verschiedene Konfigurationen: Einzelner Arbeitsbereich, Pendelbearbeitung Geeignet für die Bearbeitung von Baggerarmen und Auslegern, z.B. für CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Fedpferx Rxtjx Aaqspg Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Antriebsleistung der Spindel: 22/30 kW Spindeldrehzahlen: 60–3.000 U/min Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf-Autopositionierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Kondisi: baik (bekas), Tahun pembuatan: 1973, Waste compactor container, garbage compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container - Stationary press for: roll-off containers - Feed chute: covered - Pressing operation: hydraulic - Pressing operation: automatic - Emergency stop switch: at the feed chute - Ram dimensions: 1450 x 650 mm Fpodpfx Aeb A Ii Sjaqeg - Ram stroke: 1100 mm - Transport dimensions: 2100 x 4500 mm - Side screw ratchets for skip containers - Function tested

Kondisi: baru, - Daya motor 9 kW - Pengendalian didukung PLC, sakelar keamanan dua tangan Fodsgl Ac Sjpfx Aaqopg - Gaya pemotongan 35 ton - Meja pembelah model lurus - Kanal pemotongan: - Panjang pisau maks L= 2000 mm - Bukaan maks H= 1200 mm - Berat mesin kira-kira 4 ton - Warna RAL 5012 - biru muda - Kisi pelindung tangan di area panel kontrol dan sisi berlawanan - Sepatu masuk forklift inklusif (untuk memudahkan transportasi mesin menggunakan forklift) - Barang pesanan Harga dan informasi lebih lanjut tersedia atas permintaan

Kondisi: sangat baik (bekas), Motor-driven NC rotary table Infinitely variable rotary table (indexing 0.001°) Integrated pallet station: pallet changer table (2 pallets) Manufacturer: Rückle Model: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm Clamping slots: 7 units Slot size: 22 H7 mm Slot pitch: 160 mm Position measurement is performed via an ROD 250 rotary encoder. Condition: Very good (used) Optionally available with machine base (travel path = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system modernizations. Fpodpfxsfk R Tdj Aaqeg Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, pendaftaran pertama: 06/2021, jenis bahan bakar: bensin, warna: kuning, Tahun pembuatan: 2021, jam operasional: 150 h, Perlengkapan: penggerak semua roda, winch kabel, Spider 2SGS large-area mower and slope mower with radio remote control, including winch. Purchased mid-2021, first owner, recent 150 operating hours service, operating manual and all documentation included, remote control plus two batteries. Fpsdpfxstv Rmfe Aaqeg I have only used the mower for mowing in a solar park, nothing else. The mower runs perfectly, no issues. If you have any questions, just call.