Mesin bubut tengah
Poreba TR 135B x 4000

Name: Poreba TR 135B x 4000
Brand: Poreba
Availability: InStock

Tahun pembuatan

2026

Kondisi

Bekas (berfungsi sepenuhnya)

Lokasi

Bydgoszcz

Mesin bubut tengah Poreba TR 135B x 4000

Data dasar

Nama mesin:: Mesin bubut tengah

Pabrikan:: Poreba

Model:: TR 135B x 4000

Tahun pembuatan:: 2026

Kondisi:: diremaj di bengkel (bekas)

Fungsi:: berfungsi sepenuhnya

Harga & Lokasi

Lokasi:: Świętego Maksymiliana Kolbego 40, 85-433 Bydgoszcz, Polska

Hubungi

Rincian teknis

Dimensi dan berat

Berat keseluruhan:

12.300 kg

Panjang total:

5.500 mm

Lebar total:

2.130 mm

Tinggi total:

1.550 mm

Spindel

Lubang spindel:

105 mm

Penjepit spindle:

MK 6

Bahan/produk yang dapat diproses

Berat benda kerja (maks.):

11.000 kg

Detail lebih lanjut

Diameter pembubutan:

1.350 mm

Diameter pembubutan di atas alas geser:

1.350 mm

Diameter pembubutan di atas carriage atas:

1.000 mm

Rincian penawaran

ID iklan:: A4489841

Pembaruan:: terakhir pada 18.02.2026

Deskripsi

The universal lathe PORĘBA TR-135B/4M has been comprehensively rebuilt and modernized by us. It features technical parameters that are consistent with the technical and operational documentation of a new machine, complies with WOT technical acceptance conditions and Polish standards, and also meets EU requirements.

The machine comes with a full 12-month warranty on spare parts and electrical components.

Availability: General overhaul to order, delivery time 3.5 months from placement of order.

Technical data:
- Centre distance / turning length: 4000 mm
- Swing over bed: 1350 mm
- Swing over cross slide: 1000 mm
- Swing in gap: 1650 mm
- Spindle bore diameter: 105 mm
- Maximum workpiece weight between centres: 8,000 kg
- Maximum workpiece weight between centres + 1 steady rest: 10,000 kg
- Maximum workpiece weight between centres + 2 steady rests: 11,000 kg
- Number of spindle speeds: 21
- Speed range (rpm): 5 - 630
Ledeflaxvspfx Ahrsru
- Number of feeds: 80
- Feed ranges (mm/rev):
Longitudinal: 0.07 – 10
Cross: 0.035 – 5
- Motor power [kW]: 27/41 (1st gear / 2nd gear)
- Overall dimensions:
- Total length: 6500 mm
- Width: 2130 mm
- Height: 1550 mm
- Total weight: 12,300 kg

Standard equipment: Tailstock, coolant pump, chuck guard, tool holder

Optional equipment available at extra cost:

- 3- or 4-jaw chuck, various diameters and types
- Digital Read Out for 2 axes, incl. display, installation, and calibration
- Steady rest 40-400 mm, with rollers
- Steady rest 400-700 mm, with rollers
- Steady rest 450-900 mm, with rollers
- MULTIFIX quick-change tool post

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Dokumen

4489841-01.pdf
4489841-02.pdf
4489841-03.pdf
4489841-04.pdf

Penyedia

Terdaftar sejak: 2018

25 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+48 607 3... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Mesin penggilingan tempat tidur - universal Erste Maschinenfabrik Auerbach FBE 1500

Jerman

10.886 km

Mesin penggilingan tempat tidur - universal
Erste Maschinenfabrik AuerbachFBE 1500

Hubungi

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: X travel: 1,500 mm Y travel: 1,000 mm Lodpfxou Nc Rij Ahrsru Z travel: 1,000 mm CNC control: TNC 530 Spindle operating hours: not yet known Milling spindle speed range: 1: 30 to 930 and 2: 930 to 4,000 / stepless rpm Tool holder horiz./vertical: SK 50 (DIN 69871/DIN 69872 Type A) Spindle torque: 1,000 Nm Swiveling spindle head left and right: 90° Feed rate: 1 - 6,000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Number of tools: 1 pc. Clamping table surface L x W: 1,600 x 800 mm Table load capacity: 40 kN Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions approx. LxWxH: 3.1 x 4.7 x 2.6 m Dimensions: coolant filter: 1.9 x 1.6 x 1.4 m Required floor space approx. LxWxH: approx. 38.5 m² Applications: Milling, drilling, tapping, boring with direct encoded linear measurement systems The guides of all 3 axes are flat guideways Milling head position controlled +/-90° ICS (internal coolant supply) and external cooling Milling spindle rated drive power 22 kW with integrated hydraulic unit up to 100 bar working pressure with coolant unit, high-pressure pump 60 bar (internal cooling), nominal flow rate 20 l/min, and low-pressure pump 4 bar (external cooling), as well as spray gun Compact band filter RESY REBER SYSTEMATIC GmbH, type KBF 452/710 Hinged belt chip conveyor DGS, type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO

Lihat detail

Iklan kecil

Bubut tengah dan bubut spindel WMW-NILES DLZ 1200

Jerman

10.886 km

Bubut tengah dan bubut spindel
WMW-NILESDLZ 1200

Hubungi

Kondisi: bekas, Detail Teknis: Diameter pemesinan di atas dudukan: 1200 mm Diameter pemesinan di atas penyangga: 800 mm Panjang pemesinan: 3200 mm Panjang bagian yang menjorok: 600 mm Tinggi antara titik di dudukan: 600 mm Diameter pemesinan pada bagian yang menjorok: 600 mm Kecepatan putar spindel – variabel: 4,6-545 / 22 langkah putaran per menit Diameter lubang spindel: 90 mm Laju umpan: 1,4-510 m/menit Kerucut penjepit: MK6 Total kebutuhan daya: 15 kW Berat mesin kira-kira: 10,0 ton Lrjdpfx Aszuyfaehrsu Dimensi P x L x T: 6,20x2,00x1,80 m Dimensi lemari kontrol P x L x T: 0,55x0,33x1,0 m Perlengkapan: Sistem pengukuran digital (dimodernisasi) Pelat putar Ø 1000 mm (4 rahang) Penyangga pahat empat arah Penyangga luar tertutup, diameter dalam 250 mm Titik senter yang berputar Perangkat pemesinan kerucut *

Lihat detail

Iklan kecil

Unit-meja dari mesin penggilingan portal, pelat penjepit dengan alur-T dari cor baja/cor abu-abu, un DROOP & REIN

Hessisch Lichtenau

11.072 km

Unit-meja dari mesin penggilingan portal, pelat penjepit dengan alur-T dari cor baja/cor abu-abu, un
DROOP & REIN

€16.000

Harga tetap ditambah PPN

Hubungi

Kondisi: bekas, Table unit from a DROOP & REIN gantry milling machine Clamping plate with T-slots made of cast steel/grey cast iron Table unit with clamping plate and extremely robust guideway Table clamping surface: 5500 x 2000 mm Travel path of the table clamping plate: approx. 3100 mm Table height/overall height: 1050 mm Table load capacity: max. 20 tons Ballscrew: Ø 100 mm Thread pitch: 20 mm (single start) - Machining table is very stably guided on the bed - Metal telescopic way cover - Originally from a DROOP & REIN gantry milling machine - Longitudinal table movement via ballscrew and SIEMENS servo motor - Clamping surface with 11 T-slots, 28 mm - Drive by SIEMENS servomotor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Width: 2000 mm Overall height: 1050 mm Net weight: 28 tons Ledsthuzpopfx Ahrsru Good condition

Lihat detail

Iklan kecil

Tönisvorst

11.290 km

Modul milling cutter
Modul 820 Grad

Hubungi

Iklan kecil

Skopje

10.280 km

Mesin bubut tengah
VDF BoehringerV6

€6.700

~~€7.000~~

EXW VB ditambah PPN

Hubungi

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 70.0961.000.253, TECHNISCHE DATEN: Drehdurchmesser: - Über dem Bett: 800 mm - Über dem Support: 560 mm - Planscheibendurchmesser: 750 mm Spitzenhöhe: - Über Flachprismen: 380 mm - Über V-Prismen: 358 mm Bettbrücke, Bett und Brückenstück: - Drehdurchmesser in der Brücke: 980 mm - Breite der Brücke vor der Planscheibe: 380 mm - Umlaufdurchmesser in der Brücke: 1040 mm - Breite der Brücke vor der Planscheibe innerhalb des Umlaufdurchmessers: 330 mm Lsdpfjup A Rzex Ahrjru - Bettbreite: 560 mm Spindelstockspindel: - Spindelbohrungsdurchmesser: 90 mm - Spindeldurchmesser im vorderen Lager: 145 mm - Spindelaufnahme: MK 6 (Morsekegel 6) Spindeldrehzahlen: - Anzahl: 18 - Drehzahlbereiche: 7,1 - 355 U/min 9,0 - 450 U/min 11,2 - 560 U/min Antriebsleistung: 7,5 - 14 kW Vorschübe: - Anzahl: 32 - Längsvorschübe pro Umdrehung: 32 Längsvorschübe: 0,071 - 2,5 mm/U 32 Quervorschübe: 0,04 - 1,4 mm/U Extras: Zusatzausrüstung, Maschinenhandbücher

Lihat detail

Iklan kecil

Hidrolik Tekan C-frame Hans Schoen TES C 25

Wermelskirchen

11.243 km

Hidrolik Tekan C-frame
Hans SchoenTES C 25

Hubungi

Iklan kecil

Bubut tengah dan bubut spindel HEIDENREICH & HARBECK Hanseat 480

Malsch

11.219 km

Bubut tengah dan bubut spindel
HEIDENREICH & HARBECKHanseat 480

Hubungi

Iklan kecil

Mesin pengasah - Interior - Vertikal Gehring 1Z600F

Jerman

10.886 km

Mesin pengasah - Interior - Vertikal
Gehring1Z600F

Hubungi

Iklan kecil

Jerman

11.152 km

Mesin batang multi-spindel
SCHÜTTEAF42

Hubungi

Iklan kecil

Jerman

11.153 km

Mesin bubut CNC
CMZTA-15-YS-640+GL20

Hubungi

Kondisi: bekas, Tahun pembuatan: 2023, Swing diameter 120 mm Turning length 640 mm Control Fanuc 32iT Total power requirement 45 kW Machine weight approx. 8.5 t CNC lathe with robot arm, 4 axes CMZ TA-15-YS-640+GL20 Year of manufacture 2023 Control Fanuc 32iT Lsdpey Nfdmefx Ahreru Y-axis: 120 mm Z-axis: 640 mm Total power-on hours: 8,122 h Operating / spindle time: 4,834 h Total machining time: 3,127 h Main spindle: 14 / 8 kW, 4,500 rpm, spindle nose: A2-6, 52 mm bar capacity Counter spindle: 14 / 8 kW, 4,500 rpm, spindle nose: A2-6, 52 mm bar capacity Equipment & Options Servo-controlled double 2x180° swing gripper, tool life monitoring TLM, 15-position tool turret with NT-55, driven tools, rigid tapping, 70 bar coolant system, Infrared measuring probe, special gantry enclosure, special software for multi-palletizing, LNS chip conveyor, mist extraction with HEPA, Renishaw measuring probe, tool presetting device, GL20 gantry loader with pallet magazine, customer-specific FN Niederhauser clamping solution, part chute, mechanical air cleaner TEBARON TEB/EH 1 EC with EC blower

Lihat detail

Beriklan di sini