Air suhu controller

Rummel Kunststofftechnik GmbH TEMP 90 W9 SSR - DM

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (LxWxH): 1,414 x 503 x 1,350 mm (without connections in continuous bypass) Weight: approx. 225-320 kg Lodpfx Aeg Ey Rfjdwjai Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control and regulation unit: Smart Controller (7" touch display) - Heater control via solid state relays - Control cabinet IP54 - Cooling controlled by solenoid valve - Flow measurement by differential pressure method - Bypass between supply and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by detection of heater surface temperature and flow rate - Dirt filter in cooling water inlet and in return of circulation system - Monitoring of supply temperature by electronic safety temperature limiter - External oil filler neck - DILO-type fittings on internal piping connections (except pump connections) - At 350°C: Continuous bypass, including bellows valves - Connection for nitrogen blanket with manometer and safety valve set to 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are specified in quotations or order confirmations.

Kondisi: seperti baru (mesin pameran), A demonstration metal band saw with base, quick-release clamping device, and coolant system. Ljdepgmkyopfx Adwjai Cutting capacity: Round/ Rectangular/ Flat 90°: 220/ 220x220/ 250x155mm Round/ Rectangular/ Flat 45°: 160/ 160x160/ 160x100mm Round/ Rectangular/ Flat 30°: 100/ 100x100/ 100x85mm Cutting speed: 32/ 66m/min For further technical data, please refer to the PDF document. Technical data and dimensions subject to change without notice.

Kondisi: baru, Tahun pembuatan: 2025, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Lasdsg U Uv Repfx Adwei Cutting capacities 0° round (pipe): 220 mm 0° round (solid): 120 mm 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: bekas, Regoplas RT50 Термо-масляный терморегулятор Термо-масло до 300°C Ljdedmn E Hspfx Adwjai

Kondisi: baru, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg Lsdpfx Aeftm Hredwsai EQUIPMENT HIGHLIGHTS: • Smart Controller Plus 7" touch / Industry 4.0 capable • Flow metering with adjustable flow alarms • Return temperature display • Frequency converter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector, 20mA/TTY • Connection for external PT100 temperature sensor for tool temperature measurement and display • Continuous bypass of the heat exchanger using a 3-way valve to reduce scaling in the heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Boost pump for system filling at high temperatures • Fill mode can be switched from cooling water to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are fulfilled only if specifically stated in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, nomor mesin/kendaraan: MA0139_1335, Showroom unit immediately available: Lsdpfohwwyrex Adwjai New Kaeser Aircenter SK 22 – 8 bar screw compressor with integrated refrigeration dryer and air receiver Control system: Sigma Control 2 Year of manufacture: 2024 Operating hours: 1 h Pressure: 8 bar Rated power: 11 kW Free air delivery at 7.5 bar: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Air receiver: 350-litre capacity Pressure dew point, refrigeration dryer: +3°C Electronically controlled condensate drain: ECO DRAIN Dimensions (L x W x H): 750 x 1335 x 1880 mm Weight: 579 kg Attractive leasing options for new machines available through our partner bank. Visit our showroom. We always have a wide selection of new and used compressors in stock!

Kondisi: baru, *Technical Standard Specification: Laodpfjfnvwqjx Adwei Device type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C supply temperature and 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring via magnetic float switch - Dirt filter in the return line of the circulation and cooling water supply - Reversal switch for leak stop operation (usable up to system shutoff temperature) - Ball valve on supply and return - Automatic temperature-dependent system shutoff - Filling duration monitoring and Aquatimer - Adjustable pump post-run - Adjustable temperature alarm - Options: Interface cable - Control unit SBCmini, with relay for collective alarm, 230V, terminal mounted on rear of controller - Heating control SSR - Control panel IP54 - Interface 20mA TTY; Arburg pin assignment - Cekon plug 16A - Corrosion-resistant components (stainless steel, brass) - Device mounted on castors, two of which are steerable with brake - Additional temperature safety device for secure shutdown of the heater via upstream heating protection - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Maximum flow rate: 27 l/min Maximum delivery pressure: 4.5 bar Motor power: 0.5 kW Design: submersible pump / peripheral impeller *Dimensions/Weight/Colors Dimensions L/W/H: 600 mm x 240 mm x 493 mm (excluding connectors) Weight: approx. 43 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium: G1/2" female Cooling water: G3/8" female *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in offers or order confirmations.

Kondisi: baru, Tahun pembuatan: 2025, General: - Maximum temperature range: 150°C for oil (heat carrier fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Qmax. 60 l/min – Pmax. 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank capacity approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level indicator - Indirect cooling system (shell and tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Ljdpjddv Itefx Adweai Electrics and control system: - Electronic PCB control - Solid state relay - Safety thermostat - Sensor breakage monitoring - Connection cable with plug Available in approx. 4 weeks!

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. pump pressure: up to 8.3 bar Motor power: up to 3 kW Lsdpfjg Ey T Ejx Adwoai Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Process media connection: Flange DN40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control unit: Smart Controller (7" touchscreen display) - Heating control via solid-state relays - Control cabinet IP54, forced ventilation - Expansion tank, heater, and piping in stainless steel - Heating with Incolloy stainless steel tubular heaters - Strainer (circulation) - Unit ready for connection, mounted on castors (2 steerable and braked) - Cooling and filling controlled by solenoid valve - Configurable automatic filling via cold water intake or separate connection (factory-set via cooling water inlet) - Flow measurement via differential pressure principle - Level monitoring with magnetic float switch - Automatic temperature-dependent system lock (not on WP7-90) - Flow monitoring by flow detection - Bypass between supply and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return of the circulation system - Continuous bypass of the heat exchanger via 3-way motorized mixing valve (WP7-180/200) - System pressure monitoring via pressure transmitter in the expansion tank (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional otherwise) - Safety temperature limiter (STB) in heater and supply line (WP7-200) - Manometer in supply line at the rear of the unit - Circulation circuit insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with European directives. Other directives and standards are fulfilled only if specified in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements differing from the standard will be specified in quotations or order confirmations.

Kondisi: baru, Tahun pembuatan: 2025, TEMP 90 W9 SSR Ledpfx Aded Aaruewjai General Information: - Maximum temperature range: 90°C water - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Immersion pump (brand: Speck) with pressure/vacuum function (leak-stop operation) - Max. flow rate: 60 l/min - Max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank capacity: 12 liters - Fittings made of brass/stainless steel - Automatic water refill - Electric level control - Indirect cooling system (plate heat exchanger) - Cooling capacity: approx. 40,000 kcal/h (10 plates) - Pressure gauge display - Integrated bypass - Solenoid valves for cooling and refilling Electrics and Controls: - Electronic, self-optimizing PCB control - Control voltage in unit: 24 V AC - Acoustic and visual alarm indication - Solid state relays - Safety thermostat - Sensor breakage monitoring - Monitoring of hose rupture and leakage - Power cable with plug Dimensions: 295 x 575 x h495 mm Weight: 40 kg