Mesin penggilingan

Sachman T10 HS

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 25.05.004, panjang total: 9.500 mm, lebar total: 2.250 mm, tinggi total: 2.300 mm, tegangan masuk: 380 V, daya: 50 kW (67,98 hp), berat keseluruhan: 21.000 kg, berat kosong: 18.000 kg, sambungan udara terkompresi: 7 batang, Perlengkapan: dokumentasi / manual, EN-Paper size: 730 x 1060 mm; maximum printing area: 710 x 1040 mm. Paper thickness: 0.05 mm – 0.5 mm. The current maximum speed (set to simulate the time for sheet removal on high-speed presses) is 4,000 sheets per hour, but the machine can run significantly faster for commercial work. Four-fold central impression cylinder, which processes all four printing units in one gripper cycle. 1988 FAG Speedproof with a control console for ink fountains and cylinder adjustment for extremely precise register printing. Attached is the original factory brochure. The machine has been completely dry-ice cleaned and the cylinders are in excellent condition. The machine is offered strictly as-is. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. The price is absolutely non-negotiable and is based on removal of parts that could otherwise be sold separately, such as the Mabeg feeder with vacuum belt, and the four-unit Baldwin stainless steel recirculator, each color with its own tank, mixer, and individual temperature control—so all four tanks can be set to different temperatures and alcohol contents. The machine has been dry-ice cleaned, and the original intention was for it to be used in electronic paper printing, but the project was abandoned due to excessive startup losses. We have had the machine for three years and, due to its size, I want to sell it as quickly as possible. That is why it is offered at this very low price. It is an excellent machine. If the machine needs to be set up for testing and trial runs, this can be arranged at an extra cost of €10,000, of which €5,000 must be paid in advance as a deposit under certain conditions. All relevant information can be found in the original FAG brochure, available in PDF format through this advertisement. Ljdpfx Aouf Sy Aolkerk Technical Data • Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) • Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) • Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) • Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) • Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) • Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) • Speed max.: 4,000 sheets/h • Floor space required (including access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) • Press height: 230 cm (90.55 in.) • Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lb) • Total power requirement: approx. 50 kW • Compressed air supply: 6 – 7 bar

Kondisi: baik (bekas), Tahun pembuatan: 2012, Eksposisi untuk Gudang Produksi dan Perakitan Disewakan Gudang produksi dan perakitan siap pakai Fasilitas lengkap - 850 m² - Instalasi kompresor tersedia - Overhead crane 40,0 t (2 x 20 t overhead crane putar) - Overhead crane 10,0 t - Gantry crane 5,0 t - Overhead crane 20,0 t - Overhead crane 12,5 t - Press Tuschier Millutensil MIL303 - Tinggi kait crane 7 m - Tinggi pintu masuk truk 4,5 x 5 meter - Troli bengkel lengkap dengan alat dan perangkat pengangkat - Kantor mandor dan ruang rapat dengan AC - Toilet pria dan wanita - Tersedia mesin bubut dan mesin gerinda - Koneksi fiber optic tersedia (kontrak melalui Telekom memungkinkan) Sewa dapat segera dilakukan Ledpfx Aoygkinjlkjrk Lokasi: 35232 Dautphetal, Industriestr. 9 Jadwal kunjungan dapat diatur berdasarkan kesepakatan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 11.574 h, jarak pergerakan sumbu X: 1.525 mm, jarak lintasan sumbu Y: 762 mm, jarak gerak sumbu Z: 625 mm, tinggi total: 3.235 mm, berat keseluruhan: 13.500 kg, panjang produk (maks.): 5.000 mm, DOOSAN MYNX 7500 II 3-sumbu ini diproduksi pada tahun 2020 dan dilengkapi dengan kontrol Heidenhain TNC 620 serta probe pengukuran TS 460. Mesin ini memiliki ukuran meja 1600 mm x 750 mm dan kecepatan spindle maksimum 12.000 rpm. Dengan dimensi 5000 × 4050 × 3235 mm dan berat 13.500 kg, ini adalah kesempatan yang sangat baik untuk membeli pusat pemesinan vertikal DOOSAN MYNX 7500 II ini. Hubungi kami untuk informasi lebih lanjut. • Panjang meja: 1600 mm • Lebar meja: 750 mm • Taper spindle: ISO 40 Double Contact Ledpfxjx U Dtwj Alkerk • Kecepatan spindle maksimum: 12.000 rpm Dimensi Kedalaman mesin: 4050 mm

Kondisi: sangat baik (bekas), Grinding length without magnetic chuck: 1500 mm Maximum grinding width: 750 mm Lodpfx Alswlh Adjkerk Longitudinal travel (X-axis): 1520 mm Cross travel (Y-axis): 650 mm Vertical travel (Z-axis): 690 mm Grinding wheel diameter: 406 x 100 mm Spindle speed: 1400 rpm Weight: 8600 kg Accessories: Braillon magnetic chuck 1000 x 500 mm Electronic control: Elcon 3

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Diameter nominal: 4.500 mm Diameter putar di atas ranjang: 820 mm Diameter putar di atas support lunette: 650 mm Lubang spindle: 115 mm Daya penggerak spindle utama: 40 kW Daya penggerak spindle milling: 25 kW Lsdpfoyk R Dyex Alkork Tipe holder alat spindle milling: HSK 100 Penukar alat: 3 x 30 posisi Kontrol: SINUMERIK 840 C Termasuk konveyor serbuk Termasuk dokumentasi Mesin terhubung listrik dan tersedia sekitar 2 minggu lagi!

Kondisi: sangat baik (bekas), twosided single machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm 0.3 / 3 Edge thickness with strip veneer (min/max) mm 3 / 10 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, no power transmission bar (Master & Slave systems) Retractable reference stops, spacing (mm): 1080 PROCESSING UNIT (for each side): Protective milling unit (pre-milling) 75.186 (1 x kW 4.4) Chipper unit (2 x kW 8) Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue) 283.1513 04.1570 + 283.205 Edge pressure zone - edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multi-function unit (radius milling and profile milling) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Lredpfjd Nt Rqsx Alkok Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Kondisi: sangat baik (bekas), Ketel pemanas Viessmann Vitorond 100kw/6101/01 Lrsdpfx Asxq Hvqslkjk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 8.155 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 1.800 mm, panjang umpan sumbu Y: 1.000 mm, panjang umpan sumbu Z: 1.000 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 50 rpm, lebar meja: 850 mm, panjang meja: 2.000 mm, berat keseluruhan: 13.500 kg, daya: 30 kW (40,79 hp), CME FS-2 Bettfräsmaschine mit nur 8.155 Betriebsstunden, Steuerung Heidenhain 426B, inkl. Messtaster und vollständigem Satz an Handbüchern. Lrjdpfx Asquqq Ajlkok

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Lsdpfsynmpgex Alkerk Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Kondisi: bekas, Tahun pembuatan: 2007, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.250 mm, kecepatan rotasi (maks.): 5.000 rpm, SPINDLE INTERFACE ISO 50 X-AXIS TRAVEL: 6000 MM Z-AXIS SLIDE TRAVEL: 1250 MM Y-AXIS VERTICAL TRAVEL: 2000 MM SPINDLE SPEED: 5000 RPM FEED RATE: 8000 MM/MIN SPINDLE MOTOR POWER: 37 KW CNC: HEIDENHAIN iTNC 530 Lrodpfswz H Rfex Alkok REMOTE CONTROL PANEL STOLLE TABLE: 7000x2000 MM, LOAD CAPACITY 15 TON/M² RAISED TABLE: 1080 X 7220 X H 820 MM TOOL CHANGER WITH 40 POSITIONS CHIP CONVEYOR CONTINUOUSLY POSITIONING HEAD TUPC 0.001°x0.001° INTERNAL SPINDLE COOLANT 20 BAR RTCP FPT AUTOCAL FUNCTION EXTERNAL HIGH AND LOW PRESSURE COOLANT TANK WITH PAPER FILTER NO.2 AUTOMATIC HORIZONTAL DIVIDERS WITH NO.2 SUPPORT TABLES NO.1 PART PROBE