Mesin pengikat tepi

SCM Olimpic S 2000

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness, rolls (min/max) mm: 0.3 - 3 Edge thickness, solid strips (min/max) mm: 3 - 12 Ledpfx Aod Nuu Heaheak Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: V-belt driven Spraying unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing station (hot melt adhesive) 283.1513 Edge pressure zone Edging magazine for rolls (number of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and profile milling) 08.342 (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 1.020 h, Fungsionalitas: berfungsi sepenuhnya, offer-Holzher-Nextec-7707-EN Laodowtiq Sopfx Aahsk

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, masa garansi: 6 bulan, tegangan masuk: 400 V, Tersertifikasi DGUV hingga: 12/2026, tahun perombakan terakhir: 2025, panjang total: 700 mm, lebar total: 480 mm, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, diameter dalam: 450 mm, sekring listrik: 16 A, Mesin adonan dengan model Diosna: SP 24 D 2 pengatur waktu & 2 kecepatan Penutup debu tepung Ljdpfxev Atrye Aaheak untuk adonan maksimum 24 kg Spiral mixer TOP hanya di tempat kami dengan pemeriksaan DGUV V3 Sambungan 400V, steker 16A-CEE Mesin bekas rekondisi dengan garansi Opsi: Kontrak perawatan Paket layanan Layanan pengiriman Pelatihan & commissioning Temukan banyak spiral mixer TOP lainnya di tempat kami!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Ketebalan tepi 0,4 – 3 mm Kontrol layar SPS Majalah tepi otomatis penuh Majalah rol otomatis penuh – gunting potong Stasiun lem cartridge + PU + nosel aplikasi otomatis Laodew Igg Sopfx Aahek Tinggi benda kerja 6 – 45 mm Unit pemotong dapat diputar 0 dan 10 derajat Milling rata, chamfer, dan radius, dapat diputar hingga 15 derajat Pisau pengikis profil Unit pemoles Kabinet peredam suara Versi CE Mesin telah DIUJI FUNGSI dan dalam KONDISI BAIK dari lokasi

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Lsdpfevvkfwex Aahoak

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Lodpevvkfdsfx Aaheak Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: baru, Tahun pembuatan: 2025, daya: 1,5 kW (2,04 hp), Einsteiger-Faserlaser-Blechschneidmaschine Geringere Laserschneidkosten und einfache Bedienung Der modulare Maschinentisch mit Verstärkungen spart Zeit beim Zerlegen und erhöht Komfort sowie Steifigkeit. Die spezielle Faserlaser-Düse und der Schneidprozess ermöglichen ein schnelleres Sauerstoffschneiden von Kohlenstoffstahl, ein gas- und kostensparendes Niederdruck-Stickstoffschneiden von Edelstahl und eine qualitativ hochwertigere Druckluftbearbeitung von Kohlenstoffstahl. Die Faserlaser-Schneidköpfe erkennen herausragende Hindernisse, um die Beschädigungsrate effektiv zu senken und Wartungskosten der Laserschneidanlage zu sparen. Geeignete Materialien: Metall Lsdpfxshvu Hye Aahjak Zustand: Neu Lasertyp: Faserlaser Schneidbereich: 3000 x 1500 mm Schneidgeschwindigkeit: 0-40.000 mm/min Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT Schneiddicke: 0-30 mm CNC: Ja Kühlungsart: Wasserkühlung

Kondisi: baru, Tahun pembuatan: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Brugge, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • 5 mm left drill bit for producing line boring holes • 20 mm drill bit for Minifix system installation • 8 mm milling tool for limited drilling and milling applications • 35 mm drill bit for hinge installations • Panel thicknesses that can be machined: 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis travel • Drilling: 920 mm • Sawing: 860 mm • X-axis support: 3000 mm Lodpfxod Hz Nij Aaheak • Z-axis workpiece thickness: 12 mm – 40 mm • A-axis: 360° • Feed rate: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum borehole diameters: 3 mm – 35 mm • Saw operates along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 PS, 3x400 V / 3x230 V • Minimum required extraction capacity: 2300 m³/h

Kondisi: sangat baik (bekas), CNC MACHINING CENTER (POINT-TO-POINT) – 4 Axes (5 Axes with FLEX 5) Portal machine (mobile in X-axis) Control Powertouch (PC85), woodWOP software Work head safety enclosure Clamping table with K-Table model consoles Console support arms (qty) 8, Clamping table dimensions (mm) 1340 Automatic positioning of consoles (X-axis) LED indicators show the programmed position of vacuum cups (Y-axis) Workpiece clamp, Automatic tool change system – POWERCLAMP Carousel tool changer – magazine positions (tool stations) 18 Max. working area (X-Y-Z) mm 4000 x 1550 x 60 Max. working area (X-Y-Z) in edge-banding mode mm 4000 x 1500 x 60 Work area – Vacuum pump (capacity in m³/h) 100/140 Chip conveyor With separate electrical and control cabinet Lodpfx Ajw Dc Nieaheak Total connection load (52 A) WORKING UNITS (TOP): No. 17 Independent vertical drilling spindles (High Speed 7500) No. 4 Independent horizontal drilling spindles (2 on X-axis + 2 on Y-axis) Drilling head motor power (kW) 2.2 No. 1 Vertical main spindle (milling unit) HSK 63 (kW 15) Edge-banding unit Power Edge (Y-axis), edge-banding aggregate (hot-melt adhesive + pre-melter) Roll material (edge banding) thickness (min/max) mm 0.4 – 3 Edge band magazine for rolls (compartment position no. 1) Pre-trimming station (cutting unit) No. 1 Traverse unit (4 horizontal drilling spindles) No. 1 Circular saw unit (diameter mm 125) Combination unit (flush trimming – profile scraper knife)

Kondisi: bekas, Tahun pembuatan: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total connected load: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double upper pressure for workpiece stability Electronic thickness adjustment Feed frequency inverter Automatic lubrication of feed chain Automatic motor calibration Touchscreen control system Emulsion spray at both infeed and outfeed Edge preheating Pre-milling unit Lajdpfx Aajv Szt Dohok Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized cutting depth adjustment Gluing unit Application of glue or hot air Heated coating roller Quick-change of complete unit Automatic positioning via motor 3 pressure rollers Edging speed: 14 m/min End trimming unit Double-motor unit with automatic tilting Tilting up to 15° THK prismatic guideways Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement