Mesin pengerjaan akhir

SINICO TR 60/4-650

Workpiece diameter – max. 40 mm
Workpiece diameter – min. 10 mm
Workpiece length 200 – 640 mm
Control: PLC Siemens S5 95 U
Total power requirement: 25 kW
Machine weight approx. 5 t
Space requirement approx. 8.5 x 2.8 x 2.35 m

Hydraulic cut-off and double-ended machining machine suitable for the pre-processing of trapezoidal thread spindles and other round workpieces, including cutting from bar stock and both-end machining such as chamfering, face milling, and drilling on stationary parts with rotating tools.

The machine consists of:
Gbedpfx Aaovp Sd Ijxjw
- Base machine model TR 60/4-650, workpiece length 640 mm
- Bar feeder for bar length 2 – 3.5 m
- Standard version for solid bars up to 40 mm diameter
- Central positioning of bar feed rollers
- Bar loading unit
- Standard feed gripper
- Indexing turret with 4 clamping stations, model TR 300.00
- 4 base jaws, width 80/140 mm, diameter 75 mm
- Turret swivels in both directions
- Sawing unit with worm drive TR 200.00, stroke 100 mm
- Saw blade: 350 mm, speed 25/39 rpm
- Motor power: 2.6/3.2 kW
- Motorized positioning of saw head
- Automatic positioning of saw stand with hydraulic clamping
- Saw blade guide
- Machining unit no. 1 – USP.00/M
- Speeds: 842/1684 rpm, 3.3/4.0 kW
- Working stroke: 80 mm
- Rapid advance: 40 mm
- Spindle mounting ISA 40/M 16
- Toothed belt drive
- Machining unit no. 2 – USP.00/M - UF
- Speeds: 360/720 rpm, 1.8/2.8 kW
- Working stroke: 80 mm
- Rapid advance: 40 mm
- Spindle mounting ISA 40/M 16
- Toothed belt drive
- Thread cutting attachment for right and left-hand threads
- Machining unit no. 3 – USP.00/M
- Speeds: 842/1684 rpm, 3.3/4.0 kW
- Working stroke: 80 mm
- Rapid advance: 40 mm
- Spindle mounting ISA 40/M 16
- Toothed belt drive
- Machining unit no. 4 – USP.00/M
- Speeds: 943/1882 rpm, 3.3/4.0 kW
- Working stroke: 80 mm
- Rapid advance: 40 mm
- Spindle mounting ISA 40/M 16
- Discharge chute
- Metric ruler rails for all adjustment movements
- Hydraulic system with delivery pump SAUER SUNDSTRAND
- Accumulator
- Rexroth flow regulator for machining units and saw
- Coolant system with filter and tank
- Coolant pump CALPERA
- Electrical system in separate control cabinet,
Control voltage 24V/50 Hz
- PLC SIEMENS S5 95 U
- Machine lamp
- Signal beacon for machine downtime indication
- Central lubrication
- Chip conveyor

In 2011, a comprehensive mechanical overhaul was carried out to optimize positioning and centering accuracy at a cost of €25,000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc., were replaced.

The machine has hardly been operated in recent years, with total operating hours estimated by the owner at approx. 24,000.
This is a used machine, therefore we sell under exclusion of any warranty.

STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.