Optimierkappsägen Stromab TR 500 2004

Stromab TR 500

Kondisi: bekas, Tahun pembuatan: 2016, tinggi total: 1.600 mm, panjang total: 14.100 mm, lebar total: 1.600 mm, translate-001 Dksdpjwnh N Nefx Ahuek

Kondisi: bekas, Tahun pembuatan: 2022, tinggi total: 1.700 mm, panjang total: 10.000 mm, lebar total: 1.800 mm, de-hu-001 Dodpoyna Ensfx Ahuokk

Kondisi: bekas, Tahun pembuatan: 2005, tinggi total: 1.750 mm, panjang total: 1.350 mm, lebar total: 1.350 mm, optimierkappsaege-2024-tr500 Djdpfx Aswq U Dxehuekk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 1.234 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 7.000 mm, panjang umpan sumbu Y: 600 mm, panjang umpan sumbu Z: 250 mm, kecepatan pemakanan sumbu X: 80 m/menit, panjang total: 8.000 mm, tinggi total: 1.800 mm, berat keseluruhan: 2.000 kg, diameter mata gergaji: 500 mm, diameter cakram: 500 mm, panjang meja: 7.000 mm, Perlengkapan: Port USB, Dijual: mesin optimizer STROMAB MATRIX TR 500 dalam kondisi teknis sangat baik, digunakan di bengkel produksi kecil, terutama untuk pemotongan kayu konstruksi. Djdpfjwp Rvhsx Ahuokk Digunakan untuk prefabrikasi rumah rangka kayu. Mesin berfungsi penuh, telah diservis secara berkala. Siap digunakan tanpa investasi tambahan. Penjualan disertai faktur PPN. BISA TEST DI TEMPAT HARGA dapat dinegosiasikan.

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 1377, USED STROMAB TR 500 PNEUMATIC CROSSCUT SAW – CE COMPLIANT - Equipped with TIGERSTOP electronic positioning stop, 4000 mm Dedpfxot U Izpe Ahuekk - Infeed roller table, 4500 mm - Outfeed roller table, 4500 mm - Blade diameter: 500 mm - Maximum cutting capacity: 360 mm (W) x 60 mm (H); 135 mm (H) x 280 mm (W) - Motor: 10 HP - 415 Volt - Serial No.: 1377 - Year: 2007

Kondisi: baru, Tahun pembuatan: 2026, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Worktable inclined at 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power: 10 HP (7.5 kW), 400 V/50 Hz TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for a bundle weight of up to 80 kg Maximum speed of the push-feed system: 90 m/min Pneumatic lift of the pusher at the end of the cutting cycle and overhead return. Data entry management: 12-inch TOUCH SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit and enter cutting cycles (patterns) directly on the controller Transfer of cutting lists created on PC via USB or Ethernet port Working software: Manual entry of bundle length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board sequence) 1000 cutting lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board sequence, volume, minimal waste, and priority length) "OPTI PLUS" package: full optimization with knot and defect removal (OPTION NOT INSTALLED ON THIS MACHINE) Technical description: "OPTI PLUS" package: for the removal of knots and defects Photocell for reading knots and defects for wood mapping Marking with fluorescent chalks/crayons (Note: Only orderable in combination with ZA250) Dodpfx Ahehw Ng Ijujkk Pneumatic side clamping device Program for creating lists on PC in XML format

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 0x0x0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimizing automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cut diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety guard over cross-cutting unit - CE compliant Dkjdpfxev A Htdo Ahusk - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Drive via brushless servo motor - Feed system with precision rack-and-pinion and length measurement via servo motor - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 sequential dimensions - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimum waste, and priority) - Standard USB and Ethernet ports - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal solution for processing material with variable lengths, with single or bundle infeed - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, and priority) - Includes OPTI PLUS function for detecting markings, ensuring full optimization and removal of knots and defects. - Markings with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Kondisi: bekas, STROMAB TR 500 – Under-table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideally suited for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 ——— Technical Data • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg ——— Condition & Delivery The machine is in excellent technical condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet via freight forwarder possible at short notice ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus 19% VAT, subject to changes and errors. Djdpfexiza Ujx Ahuskk