Mesin penggilingan portal

Styrotec FS15 VTS

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: 1 pengumpan luncur kanan 1 press eksentrik 250 kN 4 unit luncur normal 1 unit luncur sempit Ruang kerja: Diameter kawat: hingga 6,0 mm Lebar pita: hingga 80 mm Panjang penarikan: hingga 520 mm Lasdsr D N Eqjpfx Aahjk Kapasitas: 10 - 250/menit.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jarak pergerakan sumbu X: 2.400 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 810 mm, CNC HEIDENHAIN iTNC 530 X/Y/Z 2,400/1,500/810 mm retrofitted 4th axis 12,000 rpm, 40 kVA, traverse paths Weight 7,800 kg Table with vacuum plate Laodpfsq Rcu Eox Aahsk with BORNEMANN 960 extraction system

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Wire diameter range: 1.8 - 5.0 mm Lajdsf Tymbopfx Aahok Ring diameter: 80 - 600 mm Wire feed length: 0 - 10,000 mm Output: up to 30 rings/min Welding transformer: 10 kVA

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Ljdexddvnopfx Aahjak Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: baik (bekas), Tahun pembuatan: 2009, panjang pemakanan sumbu X: 6.000 mm, panjang umpan sumbu Y: 3.000 mm, panjang umpan sumbu Z: 1.500 mm, model controller: HAIDENNAIN, panjang benda kerja (maks.): 6.000 mm, lebar benda kerja (maks.): 2.500 mm, lebar meja: 6.000 mm, panjang meja: 2.500 mm, Gantry milling machine with 5-axis head Lasdpfjvcqybjx Aahjk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, lebar meja: 1.100 mm, panjang meja: 3.500 mm, tinggi total: 4.164 mm, lebar total: 5.875 mm, panjang total: 9.120 mm, kecepatan rotasi (maks.): 6.000 rpm, berat benda kerja (maks.): 8.000 kg, berat keseluruhan: 29.000 kg, torsi: 760 Nm, ACCESSORIES Cooling System: Yes Through Spindle Coolant: Yes Portable Handwheel: Yes Workpiece Measuring Probe / Heidenhain Tool Probe: Yes Preparation for Renishaw Touch Probe: Yes Full Enclosure: Yes Lajdpjulwy Asfx Aahsk Chip Conveyor (2 Augers + 1 Side Hinged): Yes Automatic Tool Changer (ATC): Yes (24 tools)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, First commissioning: 2000 Control unit: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle completely overhauled at the end of 2024 !!! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z axis: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Laedpsw Rl S Sjfx Aahsk Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - Illustrated additional clamping table not included in scope of supply Condition of the machine Fully functional, very good condition. Machine remains powered and is available immediately.

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 2.000 mm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 15 m/menit, kecepatan rotasi (maks.): 5.000 rpm, panjang meja: 4.000 mm, lebar meja: 2.000 mm, Mobile column milling and boring machine Sachman PX 120 equipped with: - X-axis travel: 6000 mm - Y-axis travel: 1200 mm - Z-axis travel: 2000 mm - Heidenhain TNC 530 CNC control unit - CNC rotary-travelling table: 2000 x 2000 mm - Fixed table: 4000 x 2000 mm - Automatic KOSMO 3 head, indexing 0.02° x 0.02° - 60-position tool magazine Lasdpov Acatefx Aahsk - Chip conveyor - Standard accessories included Free payment deferral over 12/24 months

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: 1 unit pemasukan sled kanan 1 mesin press eksentrik 250 kN 4 unit sled standar Lodpfx Aajr Axlvshjak 1 unit sled sempit Ruang kerja: Diameter kawat: hingga 6,0 mm Lebar pita: hingga 80 mm Panjang penarikan: hingga 520 mm Kapasitas: 10 - 250/menit.

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0540/98, Fertigungsnummer: 0540/98. Baujahr: 1998. Presskraft: 400 Tonnen. Hubweg: 300 mm. Hubzahl: 10–40 / min. Stößelverstellung: 300 mm. Einbauhöhe: 700 mm. Tischabmessungen: 1600 x 1300 mm. Eigengewicht: 45 Tonnen. Ständerdurchgang: 1600 mm. Außenmaße: 2 x 3 x 6 Meter. Laedpfxsicbbzs Aahjk Steuerung: MEAB. Walzenricht- und Zufuhrgerät: iRON RNE 50B / 11. Abwickelhaspel: iRON SA6000, max. Bandbreite 700 mm.