Mesin las manual kawat panas 500AC/DCi

TipTig TIP TIG extreme case large HW System 500

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, Timesavers bekas model 22-Seri-900-WB dengan sistem ekstraksi basah Spesifikasi teknis: Tahun pembuatan: 2009 Mesin telah direkondisi total – Sabuk transportasi baru – Sikat putar baru Lebar kerja: 900 mm Dimensi sabuk amplas (L x P): 1900 x 930 mm Konstruksi mesin sesuai standar CE Sakelar utama, tombol darurat Rem cakram Listrik: Daya: 28,05 kW Sambungan listrik: 3 fasa Tegangan: 400 V Arus: 55 A Frekuensi: 50 Hz Unit 1: Unit rol kontak, Ø150 mm Rol kontak 45° Shore Penyetelan halus Jam ukur pada rol kontak Arah rotasi mengikuti pengumpan Motor utama 7,5 / 15 kW Osilasi Unit 2: Unit sikat Sikat Ø200 mm “Clean-Strip” 17CS02 Polishing No. 6 2 arah rotasi Jam ukur Penyetelan halus Osilasi Motor 11 kW Ledpfx Aexc H Rfsahsta

Kondisi: baru, Sheet bending: 6.0 Lsdpfxjd Ab H He Aahota Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: baru, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiusverschil ----- 50/230 Buigsnelheid/herhaalbaarheid ----- 230º/s. ±0,05° Dorne-lengte ----- 1 000–∞ Gewicht ----- 5000 kg Machinedimensies ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Ledjga T E Ajpfx Aahsta Lengte-invoer ----- 0–1800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten volgens VDMA-, ISO- en DIN-normen OPTIES * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering, elektromagnetisch of optisch * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van de bedlengte

Kondisi: baru, nl->en Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05° Tube length ----- 1,350 ∞ mm Weight ----- 2,200 kg Ljdjga T Exepfx Aahota Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0–850°/sec Length feeding ----- Standard 0–2,400 mm/sec Booster ----- 0–1,200 mm/sec Degree of tolerance ----- 0.05°/mm Bending head rotation ----- 0.75 sec Standard components conform to VDMA, ISO, and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with freely programmable robot or loading arm * Weld seam detector and tube positioner (electromagnetic or optical detection) * Free-form radius bending * Simulation/Collision Control * Bed length extension

Kondisi: bekas, Fronius MIG/MAG welding system TransSynergic 4000, water-cooled, F++ connection, output up to 400 A. For components and their technical specifications, see variants. Ledpfxsw Ev Stj Aahjta The fully digital and microprocessor-controlled MIG/MAG power source for short arc, spray arc, and pulsed arc welding delivers optimal welding characteristics and consistently reproducible results. With a power output of 400 A, the TransPuls Synergic 4000 meets the highest demands in the automotive and supplier industry, mechanical engineering, chemical plant construction, machinery and rail vehicle manufacturing, as well as shipbuilding. Featuring multi-process capability, this power source is suitable for MIG/MAG, TIG, and electrode welding, for both manual and robotic applications.

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), 20 identical welding machines available. Model: cool41 U31, Standard: IEC 60974-1, -2, -10 C.L.A, Mains voltage: 400V, Frequency: 50/60Hz, Protection class: IP23, Power input P min: 0.9kW, Cooling capacity P max: 0.35MPa (3.5bar), Max. current consumption: 2.5A, Length: 539mm, Width: 210mm, Height: 415mm, Weight: 22kg. Control system: Comfort 2.0 with intuitive operation via click-wheel. Pulse, spot, and normal modes continuously adjustable (especially for TIG welding), adjustable pulse pause ratio (balance), e.g. from 10-90%, Hz and kHz pulsing up to approximately 15 kHz. ActivArc technology: dynamic arc control ensures consistent performance even with variations in torch distance and prevents electrode sticking, improved root and penetration quality. spotArc/Spotmatic functions for spot welding/tacking. 2-stroke/4-stroke modes selectable via torch trigger. Integrated manual electrode welding (often with stick pulse automation). Adjustable pre-flow and post-flow gas times; upslope/downslope time also controllable; torch modes accessible via torch button (e.g. reduced secondary current, etc.). Memory/JOB storage: Recurring welding tasks can be stored (depending on version, approx. 8-100 JOBs). Energy efficiency: high efficiency, standby function included. Remote control & interfaces: foot pedals, function torches connectable, optional LAN/WiFi gateway (ewm Xnet), PC interfaces for parameter setting and monitoring. Very little used, on-site inspection possible. Ltjdpfxexdc Upj Aahoa

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, en-1 Ljdpfx Aasw An Uhohjta

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Ltjdpettah Rsfx Aahsa Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Photos show new machine.

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 5.000 kg, tinggi angkat: 3.770 mm, panjang total: 5.930 mm, Diesel forklift Linde H 50D-01/600 Drive: Diesel Year of manufacture: 2023 Lifting height (mm): 3,770 Ltjdpfjxd El Rsx Aahja Load capacity (kg): 5,000

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jenis kontrol: Kontrol NC, tingkat otomatisasi: otomatis, jenis aktuasi: hidrolik, model controller: 4 axis with digital readout, jumlah rol: 4, diameter rol atas: 360 mm, diameter roll samping: 320 mm, diameter rol: 400 mm, panjang rol: 3.050 mm, lebar kerja: 3.000 mm, ketebalan lembaran (maks.): 20 mm, ketebalan pelat baja (maks.): 20 mm, ketebalan maksimum lembaran baja tahan karat: 26 mm, berat keseluruhan: 17.400 kg, panjang total: 5.500 mm, lebar total: 2.010 mm, tinggi total: 1.900 mm, daya: 18,5 kW (25,15 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, Perlengkapan: alat pembengkok kerucut, dokumentasi / manual, henti darurat, rol yang dikeraskan, pl_bending_machine_specs Ltsdpfx Aajxqyxlohoa