Blower,Centrifugal fan

Venti Oelde HRV 56N-400/M GL 360

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: Dksdpfx Ajh Ek Dajavjw - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: bekas, Tahun pembuatan: 1991, lebar kerja: 220 mm, diameter spindel: 40 mm, tinggi kerja: 120 mm, lebar total: 1.500 mm, tinggi total: 1.500 mm, panjang total: 3.900 mm, berat keseluruhan: 2.000 kg, panjang meja jointer: 2.000 mm, jumlah spindel: 4, penghilangan serpihan: 10 mm, No. 04530 Mesin serut empat sisi WEINIG Quattromat 22 Bekas, tahun pembuatan 1991, kondisi sangat baik, mesin berasal dari bisnis milik satu orang Mesin serut dan pemotong alur empat sisi dengan sistem pengumpanan kontinu Susunan spindel: 1. Spindel di bagian bawah / 2. Spindel di bagian kanan / 3. Spindel di bagian kiri / 4. Spindel di bagian atas Pengumpanan yang dapat diatur secara bertahap 6 - 22 m/menit Panjang meja perata 2000 mm Lebar kerja 25 - 220 mm Tinggi kerja 6 - 120 mm Penghilangan serpihan maks. 10 mm Diameter spindel 40 mm Daya motor spindel 1 di bagian bawah 4 kW Daya motor spindel 2 di bagian kanan dan spindel 3 di bagian kiri secara bersamaan 5,5 kW Daya motor spindel 4 di bagian atas 5,5 kW Rol pengumpan baja bertekstur Rol penarik karet Rol karet di dalam meja Termasuk alat operator dan rol pengganti Termasuk manual pengoperasian sebagai file .pdf Dksdpfezl Uuksx Aavew Dimensi pengiriman sekitar 3900 x 1500 x 1500 mm (Panjang x Lebar x Tinggi) Berat sekitar 2000 kg Untuk menghindari kemungkinan kesalahpahaman, inspeksi di lokasi dimungkinkan dan disarankan setelah perjanjian sebelumnya Penjualan dilakukan dalam kondisi saat ini Spesifikasi teknis, deskripsi kondisi, tahun pembuatan, dan cakupan pengiriman sesuai dengan brosur pabrikan atau informasi dari pemilik sebelumnya, tanpa jaminan Penjualan antara waktu dapat dilakukan Untuk mesin bekas, semua jaminan ditolak, berlaku: “dibeli sesuai dengan kondisi yang dilihat” Ketentuan pembayaran: Harga belum termasuk PPN, pembayaran dilakukan sebelum pengambilan atau pengiriman Ketentuan pengiriman: dari gudang