Bubut-konvensional-elektronik

WEILER MATADOR VS

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 280 mm, WEILER_MATADOR_VS2_nl-hu Nodpfxjytd U Rs Abvocp

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7/61, Manufacturing origin: Switzerland Voltage: 380/50/3 Net weight: approx. 760 kg Customs tariff number: 8459.2930 External dimensions: approx. 1250x1000x1700 mm TECHNICAL DATA: WORKING AREA X and Y travel: 200x200 mm Vertical quill stroke: 250 mm Quill travel: 70 mm Max. clearance between table and spindle nose: 330 mm Clearance between column and spindle center: 260 mm Max. drilling capacity (in steel): 10 mm Max. boring capacity: 50 mm TABLE Usable surface: 400x300 mm Load capacity: up to 100 kg X and Y travel: motorized Number of T-slots: 6 (longitudinal) DRILL HEAD Spindle taper: Morse 0 Spindle speed, infinitely variable: 150-3000 rpm Spindle feed: 0.015 mm/rev Nedpfx Abod Amgksvecp Measuring system: direct, optical Measuring elements: graduated scales, increments 1 mm Readout: display Zero point shift: yes Direct reading: 0.001 mm Guaranteed positioning accuracy: 0.002 mm Installed power: 1.2 kW All technical data is subject to change without notice or error. Inventory No. 2160006, machine equipped with: 1 rotary table Ø 220 mm with optical measurement 1 centering microscope with three-point suspension, 40x magnification, illumination 1 centering device with dial gauge, Cap. 3 mm, MK0 1 Morse taper center, MK0 1 probe with spring-loaded tip, MK0 1 center punch, MK0 1 chuck for centering drills, MK0 1 self-tightening drill chuck 0-5 mm, MK0 1 boring head Type 0, capacity 0.5-30 mm, MK0 1 leveling foot with 2 round leveling supports

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Jarak antara senter: 500 mm Tinggi senter: 160 mm Lubang spindle: 36 mm Kecepatan putar: 56 – 2000 rpm Dudukan tailstock: MK 3 Daya penggerak: 2,4 kW Berat: 650 kg Dimensi: 1.400 x 700 x 1.220 mm Tampilan digital: Opsional dengan biaya tambahan Njdsypbypopfx Abvocp Aksesori: Aksesori tambahan tersedia atas permintaan!

Kondisi: bekas, Turning length 500 mm Swing diameter over bed 297 mm Swing diameter over cross slide 160 mm Spindle bore 36.0 mm Spindle mount DIN 55022 size 5 Nsdpsxaccxjfx Abvscp Quill: 3 MT Quill travel 90.0 mm Spindle speed 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement 3.3 kW Voltage 380 V Machine weight approx. 620 kg Dimensions L-W-H 1420 x 700 x 1200 mm From a vocational school – very good condition (!!) Regularly serviced by WEILER factory service Especially suitable for medium-precision turned parts Equipment: - Robust lead and feed screw lathe - KLOPFER 4-jaw chuck Ø 140 mm - Collet chuck with a large assortment of collets - Chuck key - MULTIFIX tool holder A, with 3 new tool inserts - Movable tailstock - Adjustable bed stop - Control panel, front left - Automatic longitudinal and cross feeds for facing and cross slide - Pole-changeable drive motor - Machine base with cabinet door (storage space) - Chip splash guard rear panel

Kondisi: baru, Tahun pembuatan: 2026, Stepless electronic spindle speed: 40–4000 rpm Spindle taper: MT2 Table height adjustment via rack and pinion Maximum thread cutting capacity: M10 Thread cutting depth set via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment via rack and pinion Continuous/standard drilling capacity in steel: Ø 13 mm / 15 mm Ncjdpfxsby Swhj Abvep Drilling depth: 60 mm Throat: 225 mm Column diameter: 60 mm Usable table surface (W x L): 330 x 250 mm Machine dimensions (W x D x H): 420 x 450 x 860 mm Machine dimensions (with base) (W x D x H): 452 x 700 x 1130 mm Weight: 62 kg Max. distance spindle/table/base: 300 / 360 mm Motor: single-phase with frequency inverter, 230 V, 0.54 kW OPTION: Drilling package no. 2 - FELIX vice, jaw width 80 mm, max. opening 120 mm - Keyless drill chuck 1–13 mm, mount B16 - Morse taper arbor MT II/B16 - Reducing sleeve MT II/MT I Price: €320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN SUPPLY ANY PRODUCT FROM THE FLOTT RANGE! PLEASE REQUEST AN OFFER!

Kondisi: bekas, Turning length 500 mm Swing diameter over bed 297 mm Swing diameter over cross slide 160 mm Spindle bore 36.0 mm Mounting DIN 55022 size 5 Tailstock quill: 3 MT Quill travel 90.0 mm Speed range 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement 3.3 kW Voltage 380 V Machine weight approx. 620 kg Dimensions (LxWxH) 1420 x 700 x 1200 mm From a vocational school - very good condition (!!) Ncedexacgdopfx Abvep Regularly serviced by WEILER factory service Especially suitable for medium precision turned parts Equipment: - Robust lead- and feed-screw lathe - KLOPFER 4-jaw chuck Ø 140 mm - KLOPFER 3-jaw chuck Ø 140 mm - Collet chuck with a large range of collets - Hinged chuck guard - Chuck key - MULTIFIX tool holder size A, with 3x new inserts - Sliding tailstock - Adjustable bed stop - Control panel, front left - Automatic feeds for facing and top slide - Pole-changeable drive motor - Machine base with cabinet door (storage compartment) - Chip splash guard (rear panel) - Emergency stop button, lower right - Machine leveling feet - Original operating manual

Kondisi: bekas, Turning length 500 mm Swing diameter over bed 297 mm Swing diameter over cross slide 160 mm Spindle bore 36.0 mm Mounting DIN 55022 size 5 Tailstock quill: 3 MT Quill travel 90.0 mm Speed range 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement 3.3 kW Voltage 380 V Machine weight approx. 620 kg Dimensions (LxWxH) 1420 x 700 x 1200 mm From a vocational school - very good condition (!!) Nodpjxacirjfx Abvecp Regularly serviced by WEILER factory service Especially suitable for medium precision turned parts Equipment: - Robust lead- and feed-screw lathe - KLOPFER 4-jaw chuck Ø 140 mm - KLOPFER 3-jaw chuck Ø 140 mm - Collet chuck with a large range of collets - Hinged chuck guard - Chuck key - MULTIFIX tool holder size A, with 3x new inserts - Sliding tailstock - Adjustable bed stop - Control panel, front left - Automatic feeds for facing and top slide - Pole-changeable drive motor - Machine base with cabinet door (storage compartment) - Chip splash guard (rear panel) - Emergency stop button, lower right - Machine leveling feet - Original operating manual

Kondisi: bekas, Tahun pembuatan: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: DIN 69880 40 x 63 Ncodpjwp D Nbefx Abvep Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar loader TRAUB Stamag DNH61 / 3000, Main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various non-driven tool holders 6 pcs. various driven tool holders Spare parts package

Kondisi: siap digunakan (bekas), lathe_spec_hu Ncjdpexq Hhyefx Abvjp

Kondisi: siap digunakan (bekas), drehauszstattung-001 Njdpfoxndbfjx Abvjcp

Kondisi: bekas, Details on request Ncsdpsdbmyzefx Abvjp

Kondisi: siap digunakan (bekas), drehauszstattung-001 Ncsdpfx Aboxnda Uovep

Kondisi: siap digunakan (bekas), drehauszstattung-001 Njdpexmakyefx Abvecp

Kondisi: bekas, Tahun pembuatan: 1996, spindeldurchlass-80-mm-traub-tna400 Nsdjxbtqvepfx Abvscp

Kondisi: bekas, Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Weiler Matador VS2, tahun pembuatan 1992, chuck tiga rahang, Multifix, pelindung cipratan belakang, pelindung chuck elektrik. Mesin dalam kondisi baik dan siap pakai, dapat didemonstrasikan dalam keadaan terhubung listrik setelah perjanjian. Nedpfx Abex Sqvgevscp