Jalur produksi jendela

WEINIG Conturex Greenline Plus

Kondisi: baik (bekas), Tahun pembuatan: 2009, Elumatec SBZ 140, Extended Length: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety enclosure Light curtains Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Hjdpfx Aex E Ahzsansfg Tool holder: HSK-63F adapter, 8-position tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotating A-axis) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis feed rate: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC system, with PC control, color display, USB & network connection. Software: eluCam. Automatic material clamps, automatic positioning via dowel pins. Pendulum/shuttle operation (two work zones), increasing production throughput. Applications include milling, drilling, tapping, sawing, and comprehensive profile processing—all with profiles clamped in a stationary position. Please note: The information on this page has been gathered and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, this does not constitute a representation or contract, and we advise you to verify all relevant details. Financial information VAT/Margin: VAT: The listed price is excluding VAT (VAT deductible for businesses).

Kondisi: bekas, • Load capacity: 350 kg • 6 adjustable suction cups, 250 mm diameter • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Available for immediate delivery IV: + Design standards 1. The design of the unit strictly complies with the European CE standard EN13155:2016, the American ASME B30.20-2006 standard, and the German UVV18 standard, with key structural performance data exceeding those of the above standards. 2. Safety factor: The main structure is rated at 4.0, the safe vacuum level is 65%, and the standard is 85%, which is 20% above the safety norm. V+ Equipment Testing and Standards 1. General a) Checks for completeness of materials, painted or scratched surfaces, suction cup damage, or pipe damage. 2. Points checked before leaving the factory: © Equipment suction test © Pressure hold test © Alarm test © Various control components • Price on request Hjdpfoxnvq Eox Aanefg

Tahun pembuatan: 2001, jam operasional: 123 h, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 123, Chip silo diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Hodpfx Asftdv Uoanefg Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Tahun pembuatan: 2018, Kondisi: baik (bekas), For machining aluminium and steel profiles Fully functional and in very good condition Processing length: 7200mm 3-axis control with 15” screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops Hodpfx Aasx Diqwensfg 8 tool positions / BT30 turret Barcode scanner Handheld control device Safety light curtain at the front and side safety fence Minimum quantity lubrication Centralised lubrication Thread cutting without floating holder Simple programming via the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Traverse speed X-Y-Z axes [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total power-on hours: 30,844 h Total spindle hours: 11,583 h

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive Hfedpfjxnlgcjx Aanog - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: baik (bekas), Tahun pembuatan: 1992, Single-piece sanding machine Top and bottom sanding Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brush unit, top and bottom, manual height adjustment Working width: 190 mm Working height: 4 – 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 – 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Hjdpfx Aaewyda Uenofg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Specifications are subject to errors and prior sale. • Stated prices are ex-works, loaded free of charge. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and phone number!)

Kondisi: baru, The ALTENDORF F 25 offers all essential features of a panel saw in a compact footprint. Whether for your first own workshop, daily use, industrial production, or as a powerful secondary machine—the F 25 is the space-saving all-rounder designed to boost your productivity. Materials such as wood-based panels, solid wood, wood-like substances, and extrusions can be processed with high precision, easy handling, and outstanding cut quality. The saw unit swivels on one side, enabling precise angle cuts. The smooth-running double roller carriage, designed according to the Altendorf system, comes as standard, as do the digital height and tilt displays. This is a machine suitable for both beginners and professionals alike. Features: - Double roller carriage Hodpfx Aeu R S Hcsanjfg - Swivelling saw unit - Manual height and tilt adjustment - Parallel fence with manual fine adjustment - Crosscut/miter fence - Ready for optional scoring unit installation ----- Technical Specifications ----- - Swivel range: 0 - 46° - Carriage length: 3,200 mm - Cutting width: 1,000 mm - Cutting height: 100 mm - Max. saw blade Ø: 315 mm - Max. saw blade projection: 104 mm - (Non-CE version) Max. saw blade Ø: 350 mm, max. projection: 121.5 mm - Crosscut fence extendable up to: 3,450 mm - Speeds: 4,200 rpm - Motor power: 4.4 kW (5.5 HP) - Table height: 880 mm - Large extraction hood available as an option - - New showroom machine -

Kondisi: baru, Tahun pembuatan: 2025, de Hfsdpfjhwrgtjx Aansg

Kondisi: bekas, Cut-off saw 3 kW Spindle diameter: 50 mm Spindle length: 300 mm Number of tool sets: variable Control: CNC Dimensions (L/W/H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Slot Mortising Machine FZS-2 Electronics with infinitely variable slotting spindles and automatic roller table ----- Cut-off saw ----- Spindle arrangement: top Three-phase motor: 3 kW Spindle diameter: 30 mm Speed: 2,800 rpm Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Infinitely adjustable saw positioning with Siko display Hfsdpfx Aaowgwlksnjg * Safety and extraction hood with 100 mm extraction port 2 slotting spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4,200 rpm Spindle diameter: 50 mm Tool diameter: approx. 360 mm Usable length: 300 mm * Both slotting spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Mitre table ----- * Swivel range: +/- 65° * Automatically changing counter support (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter support always in cutting plane for any angle setting Special equipment ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2,500 mm Extraction port diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for cut-off saw ----- Price for the above machine on request! ----- Photos show the same model. Original images not yet available. (Technical data as provided by manufacturer – no guarantee!) All prices net, plus legal VAT.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.300 mm, tinggi penggerindaan: 160 mm, jenis penyesuaian ketinggian: listrik, panjang sabuk penggiling: 2.150 mm, Heesemann JSM 1350 RC Surface Sanding Machine Year of manufacture: 2025, brand new machine, currently the only exhibition machine available in Europe! - Electronic height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units equipped with separate motors and infinitely variable belt speed up to 18 m/s - Infeed and outfeed table extensions - Industrial PC 15.6" - Program memory for 100 programs - Remote service - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speed: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Hfjdpfx Aewcqr Asanog Sanding belt dimensions: 2,150 x 1,370 mm Belt speed: 18 m/s Drive power: 15 kW Front calibration roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System (EMS) - Doors with glass inserts - LED lighting inside the machine - Vacuum table pre-configured (drilled) for vacuum blower connection - Vacuum blower (integrated in machine) - Workpiece cleaning with oscillating air nozzle - CSD (Magnetic pressure beam) The machine is connected and can be inspected on site by appointment. Please do not hesitate to contact us if you have any questions.