Planer empat sisi

WEINIG Powermat 2000 XL

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 106196, tinggi penyerutan: 200 mm, diameter spindel: 90 mm, lebar perataan: 300 mm, kecepatan spindel (maks.): 8.000 rpm, jenis penyesuaian ketinggian: listrik, sambungan udara terkompresi: 8 batang, jumlah spindel: 5, For sale: Weinig planing line with Kallfass mechanisation before and after the planer. Hedpfx Aaoyzibmsnsfg The planing line is currently no longer in daily production. The operator-side (left) first spindle and holder are defective. Weinig Four-Side Planer: Weinig Powermat 2000XL (year 2006) with 5 spindles (Weinig Powerlock System) plus chamfering unit. "Setup time reduction!" Spindle arrangement: bottom, right, left, top, bottom The bottom and top spindles each have a jointing device. Spindle motor power: bottom 23.5 kW / right 15 kW / left 15 kW / top 28.5 kW / bottom 28.5 kW Spindle speed: 8,000 rpm Feed drive: 15 kW motor providing feed speeds from 6–60 m/min Pneumatic requirements: Nominal pressure 8 bar, operating pressure 6 bar The planing line is suitable for parts with the following dimensions: Shortest part: 2.00 m Longest part: 11.00 m (depending on mechanisation) Minimum thickness: 19 mm Maximum thickness: 200 mm Minimum width: 40 mm Maximum width: 300 mm Maximum planing depth: 35 mm Feed speed: 6–60 m/min Ripping is possible on the fifth (bottom) spindle up to 60 mm height. Mechanisation: Kallfass "HmoK10000" year 2006 (operational/used) Mechanisation by Kallfass before and after the planing line. At the infeed, it is possible to buffer 2–3 packs, which must be separated manually before the infeed. Layer formation after the planer is done via a paternoster with three adjustable walls. Maximum part length with this setup is 11.00 m. The price is net ex works and without warranty. Complete dismantling is to be carried out by the buyer. A large inventory of cutterheads, spare parts, and various extraction components is available and can be purchased separately.

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, WEMHÖNER VARIOPRESS Basic 1000 S Vacuum Membrane Press Technical Data: - Heating plate dimensions (mm): 2850 x 1550 - Electric heating plate configuration: Aluminum heating plate on top - Total pressing force (kN): 2400 Hodev Np H Hspfx Aanjfg - Maximum chamber pressure (bar): 6 - Maximum operating temperature: 180°C - Maximum batch or workpiece size (mm): approx. 2460 x 1180 - Thermoplastic film as roll material: film width approx. 1430 mm - Film thickness (mm): approx. 0.25 - 1 - Pressure chamber height (mm): up to max. 180 Connections: - Installed power (kW): approx. 46 - Required air pressure (bar): approx. 8

Kondisi: diremajakan ulang (bekas), Sortierlinie für trockene Bretter - Sortierlinie für trockene Bretter - 20 Sortierstationen – Bandanlage - automatische Leistenentnahme - Trimmer von Almab mit 16 Sägeblättern - Automatisierung: TG Automation, Schweden – Sortierung - Dynalyse MC Pro 2400 System - Markierungs-/Drucksystem: Alpha Dot Merlyn 350 Hodpfx Aajvzqcyonofg - Trommelhacker Erjo 204 MA - Stapelanlage Almab mit 9 Kassetten - Paketpresse

Kondisi: baik (bekas), Tahun pembuatan: 1992, Single-piece sanding machine Top and bottom sanding Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start Pneumatic belt tensioning Main switch Hfjdpowyda Usfx Aanjg Sanding belt oscillation Finish brush unit, top and bottom, manual height adjustment Working width: 190 mm Working height: 4 – 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 – 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Specifications are subject to errors and prior sale. • Stated prices are ex-works, loaded free of charge. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and phone number!)

Kondisi: baru, Tahun pembuatan: 2024, Boring and inserting machines Rilesa Vlg 2200, new - March 2024 Make: Rilesa Model: Vlg 2200 Description: Condition: new Year: 2023 Start type: to be agreed Shipping costs: Customer Protection Delivery terms: COLLECTION BY CUSTOMER Hsdpegbpmhjfx Aansfg Category: Machine tool accessories in Poland Subcategory: Drill bits Subcategory 2: Drilling machines Description: DRILLING MACHINE WITH MAGAZINE FOR 8 DRILL UNITS, TWO FRONT (RIGHT AND LEFT), 3 UPPER, AND 3 REAR Year: 2024 The machine can be equipped with additional drilling heads. We are also a manufacturer of heads in various spindle centre distances and with various numbers of drilling spindles, according to individual customer requirements.

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Hfedexy Tmnepfx Aaneg Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: sangat baik (bekas), KUKA Model: KUKA KR 16 R2010 / Control Unit KR C4 / KUKA smartPAD KUKA KR 16 R2010 – Industrial Robot Technical Data: Payload: 16 kg Reach: 2010 mm Repeatability: ±0.05 mm Axes: 6 Mounting options: Floor, ceiling, wall, or inclined mounting possible Controller: KUKA KR C4 (Standard) Typical Applications: - Handling & assembly - Arc welding - Machine tending - Packaging & palletizing - Pick-and-place tasks Special Features: - Flexible use in many industrial sectors - High precision and reliability - Compact design with large reach Condition: Used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Hfodpfswb Ef Usx Aanjg For further questions, we are happy to assist you by phone.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Output: 225 tons/24h, mold carriers: 42, mixing positions for additive mixing: 10, mixing head type: MQ, max. operating pressure: 180 bar, pressure vessel: 330 bar. Foam types: rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multi-mold foaming is possible. Full documentation is available. An on-site inspection is possible. Hfjdpottbd Nsfx Aanjg

Kondisi: baik (bekas), Tahun pembuatan: 1999, translation-01 Hodpjtlzdqefx Aanjfg

Kondisi: siap digunakan (bekas), Linia do odzysku pryzm z następującymi maszynami: Jedna dwutarczowa obrzynarka do desek Hfodpfxsgwqk Sj Aansg Jedna jednoostrzowa pozioma przecinarka taśmowa System przenośników pomiędzy maszynami w komplecie.