Pusat pemesinan jendela CNC

WEINIG UNICONTROL 10

Kondisi: diremaj di bengkel (bekas), Slot spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled, radial and axial ----- Machine was factory overhauled by Weinig in 2024. During the overhaul, the control system was also updated to Siemens S7 677 C with a new “Touch” membrane panel. Equipped with the following machining units: Cross-cut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically in 8 positions for edge rounding from above Bottom-mounted edge rounding unit ----- axial adjustment together with the cross-cut saw Tenoning and slotting spindle ----- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm tool swing diameter min. 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial adjustment travel 580 mm axial adjustment speed 100 mm/sec 1st profile spindle (climb and conventional milling) ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit (top) ----- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit (right side at machine outfeed) ----- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional equipment: ----- CNC-controlled length stop, mounted on slotting table, for workpiece lengths up to 3500 mm, incl. cross-cut saw position integrated in control. Godpfsxpi Dusx Agrjuc Studio sash window device, swiveling ±60° Twin part package with automatic singulation and transfer Climb milling facility with window automation for window rebating Rebating cart for rebating of small sash widths Climate unit in control cabinet PC control NEXUS Automatic turning system Lamella conveyor, incl. return belt for transporting workpieces back to operator (Technical data according to manufacturer – no liability accepted).

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Dijual 4 unit CNC ROVER BIESSE 2231. Tahun pembuatan: 2013, 2014, 2015, 2016. Kondisi sangat baik. Gedsx Tbk Rjpfx Agreuc

Kondisi: belum diuji (bekas), 2 slot spindles Number of milling units: 5 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC window processing line, optionally with extensive tooling ----- Options available (with extra cost) IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 front doors Technical manufacturer description: ----- Item 1: Weinig Unicontrol 10 NC window processing line ----- Cut-off saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000-6,000 rpm. Maximum tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically in 8 positions for edge rounding from above Horizontal corner rounding unit (bottom) ----- Axial movement mechanically connected to the cut-off saw 1st tenoning & slotting spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Axial movement: NC axis Base position below table: 5-10 mm Radial movement: fixed 2nd tenoning & slotting spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Godpfx Agozawizjrjuc Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 320 mm Axial movement: NC axis Radial movement: NC axis Base position below table: 5-10 mm 1st profile spindle (climb & counter-rotation) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm Horizontal profiling unit (top) ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool diameter: 130 mm Adjustment pneumatically in 8 axial and radial positions 3rd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm Vertical profiling unit, right at machine end ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Max. tool diameter: 210 mm Adjustment pneumatically in 8 axial and radial positions Further accessories -----...

Kondisi: bekas, Aggregate 10 Spindle diameter 40 and 50 mm Motor: 1x15 kW, 4x11 kW, 5x3 kW Weinig Unicontrol 10 (UC 10) angle processing centre for the production of windows, components, and doors. Suitable for batch, series, or single-part production with 2 tenoning and mortising spindles, incl. Oertli tooling set. - Units: 1. Cross-cut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Horizontal profiling unit (top), 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Vertical profiling unit, right, 3 kW 9. Vertical profiling unit, right from above, 3 kW 10. Horizontal profiling unit (bottom), NC axis, 3 kW - Double-part package - Rebating package with rebating carriage - Automatic turning system Gsdsv Ag Tdepfx Agrouc - PC control NEXUS - CNC-controlled length stop - Studio window device - Edging unit from below with cross-cut saw - Mullion support bar - Incl. extraction duct system - Incl. Oertli tooling set - Further technical data and tooling drawings available on request.

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Otomatis penuh, posisi berdiri, Area pemotongan: 5.300 x 2.200 mm (lebar potong x tinggi potong), Diameter mata gergaji: 300 mm, Kontrol untuk pemotongan vertikal dan horizontal, dengan stopper lipat ALU dan penyangga tengah ALU, dengan perangkat scoring SUPER-CUT Motor: 3 kW - 400 V Gedpfxox Rr D Ae Agrsuc Ketersediaan: segera Lokasi: Röllbach

Kondisi: bekas, Tahun pembuatan: 2000, Lokasi gudang: Nattheim Godpfx Asvwdmwegreuc

Kondisi: bekas, Used control cabinet from a Weinig Unicontrol 10, suitable as a source of spare parts or for rebuilding a control cabinet. Contents include, among others: - Siemens Simatic S5 Gjdpfx Asrrk I Hegrouc - Siemens EMG 45

Kondisi: sangat baik (bekas), Frezing spindle bawah SCM T150 Diameter spindle: 35 mm Panjang total spindle: 180 mm Pengangkatan spindle listrik Gerakan pagar listrik Godpfx Asw Ral Hjgrouc Sudut dapat diatur secara elektrik -10/45° Kecepatan spindle variabel: 3000-4500-6000–7000-10000 rpm Motor berkekuatan 5,5 kW Dokumentasi teknis DTR

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 83406, Pusat pemrosesan jendela Weinig Unicontrol 10, tahun pembuatan 1998 Gjdpfx Agoy Sxlpjrsuc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 142 mm, produsen pengendali: SIEMENS, model controller: WS 400-20, CNC machining center from 1997. This WEINIG / DIMTER Unicontrol 10 offers a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It features a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking for high-quality CNC processing solutions, you should consider the WEINIG / DIMTER Unicontrol 10, which we are offering for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis travel: 3,000–3,500 mm (depending on version) • Cross-cut saw motor power: 3.7 kW • Cross-cut saw spindle speed: 2,800–3,000 rpm • Cross-cut saw max. tool diameter: 400 mm • Cross-cut saw spindle diameter: 40 mm • Number of tenoning/grooving spindles: 2 units • Tenoning spindle diameter: 50 mm • Clamping length of tenoning spindle: 400–640 mm • Tenoning spindle max. tool diameter: 400 mm • Tenoning spindle 1 motor power: 11 kW • Tenoning spindle 2 motor power: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Number of profiling spindles (vertical): 2–3 units • Profiling spindle diameter: 50 mm • Clamping length of profiling spindle: 320–400 mm • Profiling spindle max. tool diameter (swing circle): 232 mm Gusdpfxsy Ixpas Agrec • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Motor power of horizontal profiling unit (top): 3 kW • Spindle diameter of horizontal profiling unit: 40 mm • Horizontal profiling unit max. tool diameter: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Kondisi: baru, Maximum welding current: 300 A Open-circuit voltage: 55 - 76 V Connection voltage: 400 V Weight: 75 kg Dimensions (LxWxH): 950 x 560 x 880 mm Gusdju Aw Shopfx Agrjc Shielding gas welding machine: - with pulse function - 300 amperes - 400 volts - 3 m hose package - Ground cable - Wire feed rollers for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0 mm

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), daya motor spindle: 11.000 W, kecepatan spindel (maks.): 6.000 rpm, This Weinig Unicontrol 10-5 was manufactured in 1998. It is a robust pre-owned window production machine with a working width of 40-220 mm and a motor power of up to 15 kW for various processing units. The machine is equipped with advanced features such as a synchronization device, electronic height adjustment, and an automatic reversing system for efficient single-operator control. If you are looking for a high-quality profiling machine, you should consider the Weinig Unicontrol 10-5 we have for sale. Contact us for further details. • Capacity • Working width: 40-220 mm • Working height (longitudinal processing): 40-100 mm • Working height (cross processing): 40-100 mm (crossgrain height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter • Feed (cross processing) • Motor power: 0.3 kW • Feed speed: 3-25 m/min • Workpiece clamping: 2 pressure pads • Length stop: with scale and magnifier for frame or sash outer dimensions • Counter: pneumatically indexed, 4 positions (not for studio-type windows), up to a max. wood height of 80 mm • Double-part package: single or double-part feeding, with cross separation and retention system • 1st piece (on the stop) wood width: 55-90 mm • 2nd part wood width: 130 mm • Feed (longitudinal processing) • Motor power: 2.2 kW • Feed speed: 4-18 m/min (infinitely adjustable via frequency inverter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Processing units • Cross-cut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool stroke: max. 400 mm • Axial adjustment: pneumatic, via 4-position turret • 1st spindle with tenoning and slotting • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool stroke: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tools: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW Godpfex S Sk Eex Agrsuc • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero-point swing-circle: 130-140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero-point circle: 130-140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For cross-cut saw and profiling/sawing units • Profile milling unit (horizontal, top; in front of the last profiling spindle) • Radially switched: 2 positions • Axially switched: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at the end of the machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 210 mm • Tool clamping length: 160 mm

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), A Weinig angle line for window and door production is available. Maximum tool outside diameter: 320 mm, maximum tool cutting circle: 232 mm, mortising spindle length: 640 mm, profiling and co-directional play length: 285 mm to 320 mm, control system: Siemens WS400. Includes complete tooling set and sash window equipment. Documentation available. Gjdpfxotq U A Ij Agrouc

Kondisi: seperti baru (mesin pameran), EN-FRONIUS-TPS-5000-2024-07-04 Gujdpfx Aswbknbogrsc