Mesin gerinda

WIRTH BM300

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Spindle tiltable: Yes, 0 to 45° Nwjdpfsuzkxxsx Afvsk Height adjustment: Handwheel / electric Tilting adjustment: Handwheel / electric Cutter jaw adjustment: manual Height display: Digital display Tilting angle display: Digital display Fence indicator: mechanical counter Spindle diameter: 30 mm Speeds: 3,000 / 4,500 / 6,000 / 7,000 / 10,000 rpm Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2,599 mm Machine depth: 900 mm Weight: 655 kg

Kondisi: baik (bekas), Crusher kayu untuk dijual Disiapkan untuk pengeluaran dengan sabuk konveyor Ideal untuk mencacah sisa kayu (semua jenis kayu lunak) dan palet Termasuk dorong hidrolik Motor: 7,5 kW Lebar rotor: sekitar 82 cm Nsdpoxbyx Tsfx Afvowk Berat: 1.460 kilogram Arus beban penuh: 32 amp Sekering utama: 35 amp

Kondisi: baru, With air flow rates of up to 22,000 m³/h, the stationary compact filter units of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger machining centers. Eligible for BAFA funding under Module 4. ECO JET series units are equipped with clean-air-side mounted fans, which draw dust- and chip-laden air towards the filter unit. The highest performance DUO models are fitted with two fans operating in parallel. A flange connection at the filter unit’s inlet allows for the attachment of individually sized ductwork. Thanks to aerodynamically optimized airflow within the separation chamber, coarse particles are immediately removed before reaching the filter sleeves. Remaining dust separated by the filters is automatically cleaned off by the AL-KO OPTI JET® filter cleaning system, with the collected material being discharged into mobile collection bins beneath the filter unit. Nwjdpowwtuiofx Afvek Applications: - Extraction at manufacturing machines, machining centers, or ductwork systems with multiple extraction points - Direct extraction during continuous operation - Industries such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics production and processing, paper production, orthopedic technology, and many others Advantages: - Wide range of standard extraction systems with many customer-specific adaptation options - Consistently high extraction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings due to possible 100% recirculation operation in many cases - Small footprint due to compact design - Suitable for both indoor and outdoor installation - Available in ATEX-compliant versions - Comprehensive accessories and numerous options for individual system configuration - Eligible for BAFA funding under Module 4

Kondisi: baru, 8 sanding units Sanding width: 180 (260) mm Maximum sanding height: 160 mm Dimensions (L x W x H): 3065 x 1600 x 1900 mm Machine weight approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (surface smoothing, de-nibbing, and edge rounding) or intermediate sanding of profiled window bars. Equipped with Softdisc technology for visible surfaces, as well as automatic profile and width adjustment. - 2 side-mounted flap wheel units, each 0.75 kW, L=120 mm, D=200 mm 1 top-mounted softdisc unit Ø=200 mm, 0.75 kW 1 top-mounted flap wheel unit L=200 mm, 0.75 kW 1 bottom-mounted softdisc unit Ø=200 mm, 0.75 kW 1 bottom-mounted flap wheel unit L=200 mm, 0.75 kW 2 side-mounted flap wheel units, each 0.75 kW, L=120 mm, D=200 mm - Linear guidance of all sanding units via linear ball bearing sets on hardened shafts - Time-controlled plunging of all flap wheel units directly above the incoming workpiece edges. Plunging allows deeper setting of units into the profiles. Nwjdjvnv Uhopfx Afvjk - Motorized workpiece thickness adjustment - Variable sanding flap speed via frequency converters for adaptable sanding intensity (separate control for discs, surface wheels, and side wheels) - Disc units as Softdisc with Velcro fastening for sanding discs (wood sanding) - Feed via three lower and one upper conveyor belts, plus spring-loaded pressure rollers with infinitely variable speed of 4–15 m/min - Touch panel settings: workpiece thickness, workpiece width (individual setting for left side units), plunge depth of side units, spindle speed, feed speed - Parameters can be saved as machine programs in program mode - Operation in automatic mode with contactless workpiece width and profile detection, and automatic adjustment of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically controlled driven infeed roller, automatic clamping of the workpiece, and start of feed after unit adjustment - Red/green status lights to indicate operational readiness - Minimum workpiece length: 380 mm - Conveyor belt width: 200 mm - Maximum workpiece width: 180 mm (260 mm with flip operation) - Workpiece height: 12–160 mm - Extraction connections: 4 x 100 mm and 2 x 80 mm diameter - Sensor-controlled tool air blast directly at the discs - Housing dimensions (L x W x H): 3065 x 1600 x 1900 mm - Total length: 4365 mm (including roller table with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400V, 50Hz, 3-phase, air connection 6 bar - CE compliant ----- Price for the above machine: on request! ----- Special accessories (with additional cost): Set of replacement flaps for Leistomat SD-200, consisting of: Surface units: 30 Strips EH45/200 - 7 (rollers) 30 Strips EH45/200 - 20 (rollers) Rabbet units: 96 Strips M55/120 - 4 SmartFlex flap disc Ø200 solid, with 30 grooves, 50 mm long Set of replacement flaps for SmartFlex flap disc, consisting of: 60 Strips M35/50 K 180-7 S Sanding paper disc VB for Softdisc, D=200 mm, grit 220, with Velour backing (Velcro), pack of 100 pieces Sanding paper disc VB for Softdisc, D=200 mm, grit 280, with Velour backing (Velcro), pack of 100 pieces ----- ...

Kondisi: bekas, nomor mesin/kendaraan: 008479, trans-001 Njdpfx Aoy Edqwefvjwk

Kondisi: baru, Arbeitslänge 2750 mm Arbeitshöhe 2500 mm Hub des Arbeitstisches 300-1000 mm Nodpjxmk D Rsfx Afvewk RUCHSER Glazing and Sealing Table RU-SW3-90° ----- Vertical work table with lifting mechanism and tilting device. Particularly suitable for glazing and double-sided sealing of wooden windows. Features: • Workpiece support surface covered with felt • Stepless pneumatic lifting mechanism, stroke from 300 mm to 1000 mm, referenced from roller conveyor height • Tilting device for double-sided sealing, with conveyor rollers, 150 mm roller length • 2 pneumatic clamps for securing the window in the tilting device • Version with special tilting device allowing window to be pushed through on roller conveyor while tilting device is closed Alternative/optional configurations available on request! Pos. 1.0: Article No.: 100000 RU-SW3-90° Vertical Work Table for Wooden Windows with Tilting Device for Glazing and Double-sided Sealing Angle section length: 1970 mm, opening angle 90°, max. working width: 2750 mm, total length: 3050 mm, total width: 780 mm, support height: 1600 mm, support surface with felt, with a roller (left OR right) as edge protection for items up to 2500 mm high. Pneumatic lifting mechanism from 300 to 1000 mm. Setup surface as roller conveyor with steel rollers, roller length and spacing 200 mm. ----- Total price for this configuration: on request! ----- Options with additional charge: Pos. 1.1: Article No.: 5202 EUR 773.00/each Support element fitted with rubber rollers Ø 48 mm, spacing 50 mm, for RU-SW3-90° and RU-SWS3 Pos. 1.2: Article No.: 7081 EUR 440.00/each Steel angle bar covered with felt, mounted above the roller strips, for RU-SW3-90°. Prevents “rattling” of windows during movement. The additional strips are mounted above all roller strips of the RU-S2. Pos. 1.3: Article No.: 5056 EUR 147.00/each RU-AK-6 storage box 1000 x 120 mm, 6 compartments, for hanging on the roller conveyor ----- Total price for this configuration: on request! Ex works, plus packaging and shipping, plus statutory VAT. PDF brochure attached. (Technical data as per manufacturer's information – subject to change without notice!)

Kondisi: baru, The new Holzprofi Maker scissor lift table supports ergonomic processing and handling of workpieces. Its versatile functionality increases productivity in the long term and optimizes workflows in your workshop. Heavy-duty and stable design. Hydraulic lift for easy foot operation. Benefits and Features: - The work table stands out for its high stability and easy mobility - Simple height adjustment via hydraulic foot pedal - Robust construction, yet mobile thanks to maneuverable castors - The sturdy wheels, smooth-running foot hydraulics, and extremely durable worktop ensure stability, maneuverability, and comfortable working height - Versatile in use: stacking aid, auxiliary table, and storage, all in one - Standard MDF perforated panel with 20 mm hole diameter and 80 x 80 mm grid - The HUB-350MDF-Schwenk model is also available with a tilting table mechanism Technical Data: Lifting height: 455 – 1210 mm Load capacity: 350 kg Table size: 2020 x 1020 x 25 mm Hole diameter: 20 mm Grid spacing: 80 x 80 mm Frame size: 1500 x 830 mm Weight: 172 kg Njdpfx Aovrv Aasfvjwk Options: Tilting mechanism for panels

Kondisi: bekas, Tahun pembuatan: 2020, KZA Keilzinkenanlage Götzinger Working width: 50 x 150 mm Working height: 20 – 50 mm Working length: 1,000 – 6,000 mm For sale on behalf of the customer! The system has been professionally dismantled and packed! The unit was used for plank material. Year of manufacture: 2020 Infeed length: 500 – 5,000 mm Finished length: 1,000 – 6,000 mm (longer versions also possible) Wood thickness: 20 – 50 mm Width: 50 x 150 mm Pressing force: 50 cm² (approx. 5 tons) Performance (cycle time): 2 – 3 joints per minute Njdpfxjyhq Ume Afvjwk Scope of supply: - Cross conveyor loading section - Finger jointing milling machine (2 milling motors each 4 kW), horizontal finger joints (edge profile) - Roller conveyor - Glue application device for PU adhesive with two applicator nozzles (requires servicing) - Hydraulic finger jointing press with 5 t pressing force - Cross-cut saw with measuring wheel - Outfeed roller conveyor with pusher Loading dimensions: 1 truck-trailer load Price of the above-mentioned machine upon request! (Technical specifications according to manufacturer – without guarantee!) All prices are net, plus statutory VAT.

Kondisi: baru, Tahun pembuatan: 2025, de-HU-IT-LT-20240620-001 Nwedpfovz Hybox Afvek

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Set for manufacturing micro-joint connections for large-scale and mass production Features: - High-performance production line - Heavy-duty working units - High feed rates - Accelerated manipulative movements result in top-level performance. Depending on the required output capacity, additional buffer conveyors are integrated into the line to further speed up the production process. TENONING MACHINE FC-10KZ-6 Specification Values Milling spindle 50 x 210 mm; 5500 rpm Spindle motor 18.5 kW Special chipper saw 300/60 x 8 mm Saw motor 6 kW Working table width 600 mm Package height 30 to 150 mm PRESS FC-10PZ6 Specification Values Board width/thickness 30–150 mm / 20–70 mm Finished board length 6000 mm Line capacity up to 15,000 linear meters/shift The machine has undergone the following upgrades and improvements: - new electrical installation - machine controller replaced with SIEMENS SIMATIC S7 with SIEMENS SIMATIC HMI panel - new infeed table before the tenoners with buffer - new board flipping mechanism – side feeder behind the tenoners (board flipping mechanism on a chain, inverter-controlled) - new chain conveyor before the press (length 4500 mm) - additionally, underscoring units for finger-joint gluing of furniture boards installed on the tenoners Machine dimensions: 16.5 m x 5 m Nwodpfxox Idl Hj Afvek