Meja penjepit

WMW 600 x 400 mm T-Nut 12 mm

Kondisi: baru, berat kosong: 17.500 kg, berat muatan maksimum: 43.500 kg, berat keseluruhan: 61.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 7.550 mm, lebar ruang muat: 2.750 mm, tinggi ruang muatan: 400 mm, ukuran ban: 245/70 R 17.5, warna: abu-abu, Perlengkapan: ABS,

Kondisi: baik (bekas), Tahun pembuatan: 2012, Mesin Pemotong Plasma CNC Portal Produsen: Microstep Tipe: SPL PAA 9001.25 Tahun pembuatan: 2012 Kendali CNC Lsdpfx Aeu U Hm Ajlkjrk Area kerja: 2.500 x 9.000 mm 1 obor plasma dengan sumber daya Kjellberg HiFocus 280i 2 obor autogen propan Meja pengumpan getar Beuting Unit filter Donaldson DFPRO12 untuk instalasi luar ruangan 16426ä

Kondisi: bekas, System: used piston diaphragm high-pressure pump / feed pump Ljdpfxedkdi Te Alkork Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa

Kondisi: sangat baik (bekas), Generator Gear Herringbone MDV 2000 Lredpfjfx Ibnox Alkek Karakteristik MDV 2000 : Diameter roda maks: 2000 mm Diameter roda min: 50 mm Modul maks: 12 Modul min: 3

Tahun pembuatan: 1993, Kondisi: sangat baik (bekas), 2 unit pompa sentrifugal Produsen: KSB Model: WKF 50/7 Kapasitas aliran: 5,5 l/s (19,8 m³/jam) Tinggi tekan: 214 meter (21,4 bar) Suhu maksimum: 130°C Seal: Mechanical seal dengan koneksi air pembersih Motor listrik: VEM Lredpfeibwarex Alksk Daya penggerak: 30 kW Kecepatan putar: 2935 rpm ! Harga per unit !

Kondisi: sangat baik (bekas), Sunnen GH210 Mesin Honing Horizontal Tahun 2010 Panjang Langkah Maks.: 8000 mm Lrjdpfxjw U Uh Dj Alkek Kecepatan Spindel: 0 - 300 rpm Daya Maks Spindel: 40 Hp (29,83 kW) Daya Maks Stroker: 18 Hp (13,42 kW) Rentang Kecepatan Langkah: 0 – 100 ft/menit (0 – 30,5 m/menit) Rentang Diameter Dalam: 2 – 24 inci (50,8 – 609,6 mm) Diameter Luar Standar: 26 inci (660,4 mm standar) Berat Maksimum Bagian: 8000 kg Perkiraan Berat Mesin: 12.066 kg 400 VAC 50 Hz, 3 Fasa (85 A) Kontrol Siemens Simatic,

Kondisi: bekas, Tahun pembuatan: 1998, Bore diameter 90 mm Stroke 490 mm Throat depth 400 mm Total power requirement 10 kW Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical honing machine Type VZH 90 / 450 F Year of manufacture 1998 Serial No. 50 / 1790 _____ Max. honing diameter 10 – 90 mm Max. honing depth 30 – 450 mm Max. spindle stroke 490 mm Spindle throat depth 400 mm Installation height under spindle nose approx. 1,200 mm Table size approx. 400 x 600 mm Max. workpiece diameter approx. 700 mm Spindle speeds steplessly variable 160 – 830 rpm Stroke speed steplessly variable 25 mm/min Spindle drive 4.5 kW Total drive power 10 kW - 400 V - 50 Hz Weight approx. 3,500 kg Overall height of the machine approx. 4,000/3,300 mm Accessories / Special equipment • Machine equipped with a Siemens S5 / Unipos 4.0 PLC control for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With fixed table 600 x 400 mm • Automatic shut-off after a specified and pre-selectable time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feed head ESZ 90/1 D • Separate hydraulics, central lubrication, workpiece clamping device on table • Currently no suitable coolant system, no honing tools included. Condition: good to very good – demonstration ready Delivery: ex stock – as inspected here Ledpfst Hw T Sjx Alkork Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Module milling cutter Module 8 20 degrees Length 1800 mm Ledpfx Aedklt Njlkjrk Diameter 120 mm Bore 40 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, produsen pengendali: SIEMENS, model controller: 840 D, jumlah sumbu: 4, en Ljdox D I A Sepfx Alkjrk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard Lodjh Ek Daepfx Alkerk - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.