Beli Mesin frais alat universal konvensional, langkah sumbu X 0–399 mm bekas (140)

Kondisi: bekas, Universal tool milling machine DECKEL Type FP 1 Universal milling machine Machine no. 2101 - Year of manufacture: 1979 Manual travels X: 300 mm Y: 160 mm Z: 330 mm Table size: 600 x 210 mm Rcjdjr U St Uepfx Adcjh Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Power connection: 380 Volt, 50 Hz - Infinitely variable feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on vertical milling head: 60 mm - Vertical milling head swivels and can extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant device integrated in machine base - Freestanding control cabinet - Original chip tray for mounting on machine base - Electrical circuit diagram available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Kondisi: bekas, Tahun pembuatan: 1976, Travel (X/Y/Z): 350 / 150 / 340 mm Table clamping surface: 600 x 210 mm Rodpfx Adowwwr Eocjch Spindle taper: SK 40 Spindle speeds: 40 - 2000 rpm Feeds: 5 - 500 mm/min Rapid traverse: 1.2 m/min Total power requirement: 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Accessories: Fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long arbors, various collets, original DECKEL tool cabinet

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit at FA Huttelmaier Very good CONDITION Technical Data: >> Year of manufacture: 1985, Machine No. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle arm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: Rcedpsu Nvwvsfx Adcjh >> 3-axis digital readout Heidenhain TNC 111 >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was completely overhauled in 2008 by the company Huttelmaier. The machine shows minimal play in the handwheels, and all spindles move smoothly. Even at maximum rotation speed, the milling machine runs very smoothly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position controller, you can enter desired dimensions, and the machine will automatically position to them. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and more precise. Take this opportunity to inspect and test this gem on site under power.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feeds, very good condition, CE compliant Technical data: >> Year of manufacture: 1992; Machine no. 2102-6209 >> Rigid angle table (newly planed) >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100mm >> Vertical and horizontal quill – SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, CE compliant, in very good condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speed the milling machine runs very quietly. A special feature is that the control cabinet is connected to the machine via a plug, making the machine easier to transport. On this newer FP1 model, feed on all three axes is steplessly adjustable, and the machine also offers rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain distance control, you can enter dimensions which the machine will then automatically approach. The FP1 was previously in a training facility, where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Rcodpfx Asxdi Ivsdcjh Take the opportunity to view and test this machine under power onsite.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Mesin frais alat Macmon M 100 NC Redpfx Ajx Hga Dedcjch Kecepatan poros dapat diatur tanpa tingkat, Pemegang alat SK 40 Perangkat pendingin Manual pengoperasian

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2013, en-GB: - Universal milling head - Fixed angle table 670 x 320 mm - Coolant system - Chip tray - Quill cover - Set of operating tools - Technical documentation - CE-compliant version - Colour: * RAL 5015 – Sky Blue * RAL 7035 – Light Grey Optional accessories: - SINO 3-axis digital readout: €1,995.00 - 1 set of levelling wedges (4 pcs.): €480.00 Technical data: Work table: - Clamping surface of fixed angle table: 670 x 320 mm - T-slots: Number / width x spacing: 5 / 12 x 63 mm - Max. workpiece weight: 150 kg - Vertical clamping surface: 670 x 220 mm Rcsdjg D Rhhopfx Adceh - T-slots: Number / width x spacing: 3 / 12 x 60 mm Spindle: - Tool holder, horizontal and vertical: ISO / DIN: 40 / 2080 - Main drive motor power 100% duty cycle: 1.5 kW Vertical milling head: - Speed range: 45 – 2,240 rpm - Number of speeds: 18 - Manual quill adjustment: 60 mm - Swivel range: 360 degrees Travel paths: - X-axis automatic / manual: 280 / 300 mm - Y-axis automatic / manual: 250 / 270 mm - Z-axis automatic / manual: 300 / 310 mm Feeds: - Feed range: 12.5 – 630 mm/min - Number of feeds: 18 - Rapid traverse: 1,200 mm/min Dimensions and weight: - Length: 1,265 mm - Width: 1,080 mm - Height: 1,620 mm - Weight approx. 1,000 kg Machine inspection / acceptance: Before loading the machine SUBJECT TO ERRORS AND PRIOR SALE!

Kondisi: sangat baik (bekas), Deckel FP1 AKTIV (3-Axis Aktiv) Machine No.: 2102-3240 Year of manufacture: approx. 1988 Travel distances: Rcsdsyll A Tepfx Adcsh X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment / Accessories: - Aktiv digital display, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head swivels and is horizontally extendable by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Central lubrication - Machine vise - Various toolholders/collets/tools Dimensions (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Videos demonstrating geometry can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout, horizontal spindle: 0.001 mm Runout, vertical spindle: 0.001 mm Parallelism deviation Y axis: 0.002 mm (measuring length 150 mm) Parallelism deviation X axis: 0.01 mm (measuring length 300 mm) Videos of the geometry measuring process can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New way cover on Z axis + various mounting parts - Machine overhauled - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Functional test performed

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1989, Dear Sir or Madam, We offer for sale a partially overhauled Deckel FP1 with 3-axis TNC113 active control, renowned for its straightforward operation. This later model, from year of manufacture 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone a thorough partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect the machine yourself on site. Rjdpfjpy Eldsx Adcsch Delivery time: on request Machine number: 2102-xxxx Table: fixed angular table or rotary-tilting table Travel distances: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed: infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital display with active control, infinitely variable feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, machine leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced beforehand - Upon request, we can deliver your chosen machine either fully or partially overhauled - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further equipment such as safety devices directly - We are happy to take care of shipping and/or installation

Kondisi: bekas, Tahun pembuatan: 2001, x-perjalanan 300 mm y-perjalanan 200 mm z-perjalanan 350 mm Permukaan penjepitan meja 600 x 200 mm Kepala spindel SK 30 Kecepatan spindel 80 - 2200 rpm Feed sumbu X 50 - 550 mm/menit Feed sumbu Y 50 - 550 mm/menit Perjalanan cepat 1500 mm/menit Redpfezczdhjx Adcsch Stroke pinol 45 mm Kepala vertikal dapat diputar +/- 90° Kebutuhan daya total 1,4 kW Berat mesin sekitar 500 kg Dimensi mesin P x L x T 1,50 x 1,20 x 1,60 m Aksesori: Layar digital 3 sumbu HEIDENHAIN, meja tetap, kepala vertikal yang dapat diayunkan dengan pinol yang dapat ditarik keluar, bantalan lawan, arbor frais pendek dan panjang, sistem pendingin

Kondisi: baik (bekas), Acera F3 Mesin frais dengan kualitas terbaik. Mesin dan transmisi terdengar sempurna. Tidak ada aksesori lain selain yang terlihat di gambar. Dapat dimuat di Eurotrailer dan pengiriman ke seluruh Eropa dapat diatur. Rcodor Ixpdjpfx Adcjh

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Mesin Milling Universal untuk Perkakas Merek: DECKEL Model: FP 1 Aktiv Tahun pembuatan: 1990 – telah diuji di bengkel No. Seri Mesin: 2102-5866 Tipe Kepala Milling: 2171 Nomor Kepala Milling: 4613 Penerimaan geometris dengan protokol pengujian Aksesori: - Tampilan digital aktif 3-sumbu HEIDENHAIN TNC 113 dengan fungsi aktif pada sumbu X, Y, dan Z - Meja universal 590 x 250 mm (alur-T: 12 mm) - Kepala milling vertikal SK 40 dengan ulir penarik S 20 x 2 Rcodpfx Ajx It Rxedceh - Tanpa sistem pendingin cairan dapat dipasang jika diperlukan - Pelumasan sentral elektrik - Manual pengoperasian Bekas pakai sesuai kondisi, tanpa garansi Mesin secara teknis sesuai standar tahun pembuatannya.

Kondisi: bekas, Tahun pembuatan: 1978, x-travel 300 mm y-travel 160 mm z-travel 340 mm Table clamping surface 600 x 210 mm Spindle mount SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t - Machine from a training workshop - Rcodpfxswl N R Nj Adcoh Accessories: fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, counter bearing, various short and long milling arbors, various collets, original DECKEL tool cabinet

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Mesin Milling Universal untuk Perkakas Merek: DECKEL Model: FP 1 Aktiv Tahun pembuatan: 1990 – telah diuji di bengkel No. Seri Mesin: 2102-5866 Tipe Kepala Milling: 2171 Nomor Kepala Milling: 4613 Penerimaan geometris dengan protokol pengujian Aksesori: - Tampilan digital aktif 3-sumbu HEIDENHAIN TNC 113 dengan fungsi aktif pada sumbu X, Y, dan Z - Meja universal 590 x 250 mm (alur-T: 12 mm) - Kepala milling vertikal SK 40 dengan ulir penarik S 20 x 2 - Tanpa sistem pendingin cairan dapat dipasang jika diperlukan - Pelumasan sentral elektrik Rsdpfx Asx S Edljdcoch - Manual pengoperasian Bekas pakai sesuai kondisi, tanpa garansi Mesin secara teknis sesuai standar tahun pembuatannya.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 340 mm, gores kuas bulu: 80 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, panjang meja: 210 mm, lebar meja: 600 mm, tinggi total: 1.750 mm, panjang total: 1.400 mm, lebar total: 1.600 mm, kecepatan rotasi (maks.): 2.000 rpm, kecepatan rotasi (min.): 40 rpm, berat keseluruhan: 850 kg, beban meja: 200 kg, masa garansi: 3 bulan, 001 Rodpjyi Amwjfx Adcoch

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1987, Mesin frais serbaguna Merek: DECKEL Model: FP 2 Aktiv Tahun pembuatan: 1987 - direkondisi, dicat ulang dengan elektrikal mesin baru RAL7035 abu-abu terang / RAL7012 abu-abu basal RAL5008 abu-abu kebiruan No. Mesin: 2202-11579 Tipe kepala frais: 2271 Nomor kepala frais: 300-3606 dengan garansi penerimaan geometrik dengan protokol pengujian Aksesori: - Penunjuk digital aktif 3-sumbu HEIDENHAIN TNC 113 - Meja tetap 660 x 380 mm (alur-T: 12 mm) - Kepala frais vertikal SK 40 dengan ulir penarik S 20 x 2 - Pelumasan sentral manual - Sistem pendingin - Manual pengoperasian - bekas, kondisi sebagaimana adanya - Rcsdpfx Adex A Eddscjh

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001 Rsdpfju Tuk Hsx Adcech

Kondisi: bekas, Tahun pembuatan: 1973, x-axis travel: 290 mm y-axis travel: 170 mm z-axis travel: 310 mm Clamping surface of table: 600 x 215 mm Rodpfxstqqn Rs Adcoch Spindle taper: SK 40 Spindle speeds: 50 - 2500 rpm Feeds: 9 - 450 mm/min Quill stroke: 70 mm Total power requirement: 1.8 kW Machine weight approx.: 860 kg Machine dimensions (L x W x H): 1.06 x 1.05 x 1.33 m Accessories: Vertical head with extendable quill, fixed table, counterbearing, coolant system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Kontrol 3-sumbu, kontrol lintasan aktif Heidenhain TNC 123 Kecepatan putar 40 - 2000 rpm, transmisi langsung berjenjang geometris dengan 16 tingkat gigi untuk torsi maksimum / performa milling Feed 5 sampai 500 mm/menit, dapat diatur tanpa langkah Rapid traverse 1,2 m/menit Pinole: Pinole dapat ditarik, vertikal 60 mm, SK40 ulir penarik M16 Sumbu X/Y/Z 300/160/340 mm Meja sudut 600 x 210 mm, beban maksimum 200 kg Rcjdpoyg I Nfefx Adcsh

Kondisi: bekas, Tahun pembuatan: 1999, Rentang pergerakan sumbu-x: 290 mm Rentang pergerakan sumbu-y: 170 mm Rentang pergerakan sumbu-z: 310 mm Luas permukaan meja: 600 x 210 mm Rcodjwngkrjpfx Adcoh Dudukan spindel: SK 40 Kecepatan spindel: 50 - 2600 RPM Laju umpan: 9 - 450 mm/menit Langkah pinol: 70 mm Dimensi mesin (P x L x T): 1,35 x 1,05 x 1,63 m Total kebutuhan daya: 5,5 kW Berat mesin: sekitar 720 kg - Mesin dari bengkel pelatihan - Aksesori: meja tetap, kepala vertikal dengan pinol yang dapat diperpanjang, Sistem digital pada 3 sumbu HEIDENHAIN, berbagai mandrel frais pendek, Sistem pendingin

Kondisi: bekas, Tahun pembuatan: 1982, Travel range X-axis 300 mm Travel range Y-axis 160 mm Travel range Z-axis 340 mm Infinitely variable feed rates 5–500 mm/min Rapid traverse 1200 mm/min Spindle speeds 40 – 2000 rpm Rcedpfx Ajvvnfusdcsh Tool holder DIN taper 40 Table length 600 mm Table width 120 mm Operating voltage 380 V Frequency 50 Hz Rated current 13 A Machine weight approx. 0.75 t Space requirement approx. 1.8 x 1.5 x 1.8 m DESCRIPTION Machine includes: active 3-axis digital readout HEIDENHAIN documentation attachments machine vice, etc.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 485 mm, panjang umpan sumbu Y: 385 mm, panjang umpan sumbu Z: 380 mm, kecepatan spindel (maks.): 3.150 rpm, Table size 795 x 460 mm Longitudinal travel 485 mm Cross travel 385 mm Rcsdpfx Aswffzkjdcsh Vertical travel 380 mm Quill travel 80 mm Spindle speed 0 - 3,150 rpm Spindle taper horizontal ISO 40 Spindle taper vertical ISO 40 Control CONTOUR 2

Kondisi: bekas, Tahun pembuatan: 1989, Travel (X/Y/Z): 350 / 200 / 350 mm Table clamping surface: 700 x 280 mm Spindle taper: SK 40 Spindle speeds: 150 – 1660 rpm Feeds: 25 – 285 mm/min Rapid traverse: 1 m/min Quill stroke: 80 mm Rcsdpfsvzhidox Adcoh Head swivelling: +/- 45° Total power requirement: 3 kW Machine weight approx.: 1.2 t Machine dimensions (L x W x H): 1.27 x 1.1 x 1.65 m Accessories: swing-away vertical head with extendable quill, fixed table, universal table, rotary table 250 mm diameter, dividing head with 3-jaw chuck 135 mm diameter, tailstock, various milling arbors, drill chuck, coolant device.

Kondisi: bekas, DE-FP1-2024-01 Rjdoyxy Swjpfx Adcsch

Kondisi: bekas, Weight approx.: 450 kg Dimensions (LxWxH): 1250 x 1350 x 1550 mm Y-axis travel: 300 mm Z-axis travel: 200 mm X-axis travel: 350 mm Speed range: 80–2200 rpm Table size: 600 x 200 mm Description: -) Coolant system Rcjdpforgvbpjx Adcsh -) Machine light -) Including machine vise Spindle speeds: 80 – 2200 (8 steps) rpm Taper: DIN2078 ISO30 (drawbolt M12) Working area: 300 x 200 x 350 mm Table: 600 x 200 mm Rapid traverse X,Y: 1200 mm/min Quill stroke: 45 mm Max. feed force: 1600 Nm Spindle motor: 1.1/1.4 kW Vertical table: 600 x 200 mm Distance vertical milling spindle – table: 20–370 mm Distance horizontal milling spindle – table: 84–434 mm Infinitely variable feed in X-axis: 20–200 mm/min Length: 1250 mm Width: 1350 mm Height: 1550 mm Weight: 450 kg

Kondisi: baik (bekas), Luas penjepitan meja sudut tetap: 195 x 605 mm Pergerakan meja memanjang/vertikal otomatis & manual: 290/300 / 330/340 mm Gerakan silang kepala spindel secara manual: 150 mm Koneksi spindel: ISA 40 Rjdpfxeyvgf Re Adcsch 16 kecepatan spindel: 40 - 2000 rpm 16 pemberian makan: 10 - 500 mm/menit Motor penggerak spindel: 380 V, 1/1,4 kW Berat sekitar: 660 kg Kebutuhan ruang: 1200 x 900 x 1570 mm