Beli Gergaji pita horizontal – semiotomatis – area potong bulat 0–300 mm bekas (104)

Kondisi: baru, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 0.24 t Space requirements: approx. 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 25 - 80 m/min -Vice with quick-clamping device -Saw blade guide made of carbide -Blade tension control -Electrical coolant system Ijdpfjd Iip Tjx Ag Rjhw Auto-Cut System = 3-stage system -Automatic saw frame lowering via hydraulic cylinder -Steplessly adjustable feed -With end switch -Quick descent of the saw frame from rest position to workpiece, then switches to normal cutting feed -Manual operation

Kondisi: baru, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Ihjdpfx Agofg E H Ue Row Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw band dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic dynamic and manual operation, equipped with MEP-28 control for miter cuts from 45° right to 60° left. Key features: - New centralized control console on an articulated arm. - Low voltage operating panel: polyester membrane keypad with thermoformed raised buttons and operation control signal. - Display showing: * Diagnostic messages (in user language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Used time per cut * Motor current consumption * Saw blade tension * Saw blade speed * Numeric display of head position. - IP55 switching handle for the 24V manual cycle. - Complete program of all special cutting cycles. - Detection of additional special cutting cycles for specific applications. - Newest generation, highly efficient and energy-saving hydraulic control unit. - Turntable (mounted on 420 mm roller bearings with preloaded thrust bearing). - Dual blade speed (40/80 m/min) with control. - Prepared for installation of an electronic inverter for continuously variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel, adaptable to the workpiece. - Clamping device laterally adjustable left and right, with quick-release vice. - Manually operated blade tension control with display via electronic transducer. - Base designed to fully collect coolant, even at maximum mitre angles. - Coolant tank (with electric pump for blade lubrication and cooling) and chip drawer (can be replaced by chip conveyor – see options) integrated in the base. - Prepared for installation of a minimum lubrication set for the saw blade (optional, in addition to standard emulsified oil lubrication). - Chip removal brush. - Machine is suitable for pallet truck transport. - Adjustable length stop for repeat cutting operations. - Material support arm with roller, for attaching the loading table. - Bi-metal saw blade suitable for solid and profile material. - Tools and operating instructions in the respective user language.

Kondisi: baru, Cutting diameter 250 mm Cutting area at 90 degrees: flat 280 x 220 mm Cutting area at 90 degrees: square 220 x 220 mm Vice width 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirements: approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic/manual function, equipped with MEP-28 control enabling mitre cuts from 45° to the right up to 60° to the left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers to perform the cut - Motor switches off - Saw head lifts - Vice opens Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via manual button). Key Features: - New centralised control console on a pivoting arm for easy operation from any workstation. - Low voltage control panel: * Polyester membrane keypad with thermoformed, raised buttons and operation control signal. * Display shows: - Diagnostics (messages in the user’s language) - Alarms (with description of causes) - Status of inputs and outputs - Cut count - Time taken for each cut - Current draw of the saw motor Ijdpfx Aefg E H Sjg Rjhw - Saw blade tension - Saw blade speed - Numerical display of head position. - IP55 switch handle for the manual 24-V cycle. - Complete program for all special cutting cycles. - Identification of other specialised cutting cycles for special applications. - Newest generation hydraulic control unit, highly efficient with low energy consumption. - Large work surface with turntable on roller bearings, 265 mm with preloaded thrust bearings. - Dual band speed (36/72 m/min) with control system. - Prepared for electronic inverter installation for stepless band speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from control panel to suit the material being cut. - Clamping device laterally adjustable to the left and right, with quick-release vice. - Manual band tensioning control with on-screen display via electronic transducer. - Base with retractable coolant tray. - Electric coolant pump for saw blade cooling and lubrication. - Prepared for installation of minimal saw blade lubrication kit (optional), alongside the standard emulsion oil lubrication system. - Swarf removal brush. - Machine is suitable for pallet truck transport. - Length stop for repeat cuts. - Material support arm with roller for loading table attachment. - Bimetal saw band for solid and profile material. - Tools and operating instructions in the respective user language.

Kondisi: baru, Cutting diameter: 300 mm Ihjdpfsfg E H Tex Ag Rjw Bandsaw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The saw bow lowers by its own weight, is counterbalanced by a spring, and the descent is regulated by a hydraulic brake cylinder. Once the cut is completed, the saw bow is manually raised to the required position for material feeding. Electrical control panel (with labeled cable connections, indicator light for operational readiness, main safety switch with provision for padlock, switch or speed selector, emergency stop, thermomagnetic protection, 24-volt low voltage system). Electronic tension converter with display for bandsaw blade tension. Manual vice with quick-locking device. Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory). Electric coolant pump for cooling and lubricating the saw blade. Chip cleaning brush. Adjustable precision stops for repeating cuts of identical length. Machine is designed for pallet truck transport. Bimetal bandsaw blade for solid and profile material. Tools and operating instructions.