Beli Press hidrolik satu tiang bekas (65)

Kondisi: bekas, Technical Details: Pressing force: 100 t Installation height (table/ram, top): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 200 mm/s Ram speed, return: 200 mm/s Table size (L x W x H): 750 x 560 x 90 mm Table opening: Ø 26 mm Ram clamping surface (W x D): 530 x 400 mm Ram bore (diameter): Ø 50 mm Lhjdovc Ax Nopfx Ah Usl Cylinder diameter: Ø 250 mm Height above floor level: 720 mm Total power requirement: 17.0 kW Approx. machine weight: 5.5 t Approx. machine dimensions (L x W x H): 1.8 x 1.2 x 3.2 m

Kondisi: bekas, nomor mesin/kendaraan: 51568, Pressure: 100 t Stroke: 0-500 mm Table area: 800 x 650 mm Ledpfx Ahecxxrro Ujhl Ram area: 800 x 600 mm Through-hole in table: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Approx. machine weight: 5.7 t Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with stroke in upper position. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun measurement 135 mm/s, overrun distance 44 mm.

Kondisi: bekas, Technical Details: Lodpfevc Awxsx Ah Uehl Pressing force: 25 t Stroke: 500 mm Installation height (table/ram at top position): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 75 mm Passage in table: Ø 180 mm Clamping surface of ram: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Approx. machine weight: 2.2 t Approx. dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand operation in setup mode) Continuous and single stroke operation

Kondisi: bekas, Pressing force: 50 t Throat depth: 265 mm Stroke: 250 mm Installation height: 400 mm Table clamping surface approx.: 700 x 450 mm Ram clamping surface approx.: 550 x 300 mm Table height above floor: 850 mm Rapid traverse down: 32 mm/s Working speed: 6.3 mm/s Rapid traverse up: 42 mm/s Power requirement: 4 kW Dimensions (LxWxH): 1290 x 1160 x 2085 mm Machine weight approx.: 1.75 t Standard features Lodpfowyplcox Ah Ujhl Siemens S7-1200 control, working mode, inching mode, foot switch, mechanically adjustable stop, light barriers Automation Robotic automation with HORST robot optionally available on request.

Tahun pembuatan: 1993, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: Seriennummer: 9302394, CNC control HATASTAR 2000 Pressing capacity: 500 t or 5000 kN Tooling available in addition to the machine Control cabinet on the left X1 + R / X2 + R axes on linear guide Y1 + Y2 axis Hydraulic upper tool clamping Pneumatic sheet following device + front stops on linear guide Second two-hand operation Ljdpfx Ajd Egc Ajh Uohl Universal die 100 x 100 x 5,100 mm Gooseneck blade 280 x 5,100 mm Die centering plate, width = 111 mm

Kondisi: baru, Tahun pembuatan: 2022, gaya penekanan: 100 t, Hydraulic C-Frame Press – Manufacturer: Hidrobrasil – 100 t – Table Ø 1050 mm For sale is a high-performance hydraulic C-frame press manufactured by Hidrobrasil, featuring a pressing force of 100 t. Designed for industrial applications, this machine offers optimal conditions for demanding forming, assembly, and production processes due to its high operating speed and robust construction. ==== Technical Specifications + Information: Hydraulic C-Frame Press – 100 t ==== General Information - Manufacturer: Hidrobrasil - Model: C-Frame Press - Design: C-frame construction - Pressing force: 100 t - Machine weight: approx. 3,500 kg - Dimensions (W × D × H): approx. 1,354 × 2,005 × 2,595 mm ==== Working Area - Daylight opening: 350 mm - Stroke: 300 mm ==== Table & Ram - Table diameter: Ø 1,050 mm ==== Speeds Lhjdpshmi T Uofx Ah Uol - Approach speed: 250 mm/s - Pressing speed: 3 – 15 mm/s - Return speed: 150 mm/s ==== Hydraulics - Number of cylinders: 2 - Cylinder diameter: Ø 250.97 mm - Piston diameter: Ø 41.76 mm - Max. operating pressure: 210 bar - Return force: 10 t - Additional ejector force: 5 t - Additional stroke: 150 mm ==== Hydraulic Power Unit - Pump capacity: 44.5 l/min - Pump displacement: 27.59 cm³/rev - Motor power: 14.24 kW - Motor speed: 1,500 rpm - Oil tank capacity: 350 l ===== Assembly work, metal forming, serial production, heavy-duty applications, toolmaking, industrial press operations C-Frame Press, Hydraulic Press, Industrial Press, Production Press, Heavy-Duty Press, Tryout Press, Tool Try-Out Press Are you looking for a hydraulic press tailored to your application requirements? Contact us for an individual offer. Our hydraulic presses are manufactured in compliance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards, as they comply in every respect with the Brazilian national safety directive NR 12, which builds upon these. Our core expertise lies in special-purpose machine engineering and press automation. We supply custom-designed hydraulic presses at surprisingly affordable prices. We use primarily components from leading European manufacturers for our hydraulic assemblies.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 40 t, panjang langkah: 250 mm, lebar meja: 700 mm, panjang meja: 450 mm, kedalaman tenggorokan: 230 mm, tinggi pemasangan: 400 mm, PRESS C-frame BARU EXNER EEX SLL 40 Standard Line LIGHT Tahun pembuatan: 2025 Kekuatan tekan: 400 kN Lhjdpjw Nx Nhsfx Ah Ujl Tinggi pemasangan: 400/450 mm Langkah (stroke): 250 mm Meja (lebar): 700 mm Meja (kedalaman): 450 mm Jangkauan (throat depth): 230 mm

Kondisi: bekas, Technical details: Pressure: 0.9 t Installation height (table/ram, top): 350 mm Lhsdou Nfw Sopfx Ah Uol Throat depth: 295 mm Ram diameter: 40 mm Table size: 600 x 330 mm Height above ground: 935 mm Machine weight approx.: - t Machine dimensions approx. (LxWxH): 1.2 x 0.8 x 2.1 m Punch holder with M24x60mm internal thread Hydraulic unit Röhm-Gamet, type 1E1 HS299, pressure 38 bar, tank capacity approx. 50 litres One-hand operation

Kondisi: bekas, Tahun pembuatan: 1960, Technical details: Pressure: 10 t Throat depth: 255 mm Maximum ram stroke: 400 mm Ram return speed: 0.180 m/sec Ram advance speed: 0.080 m/sec Installation height (table/ram, top): 630 mm Installation height (table/ram, bottom): 230 mm Table clamping surface: 420 x 400 mm Through-hole in table: 220 mm Ram clamping surface: 200 x 200 x 65 mm Total power requirement: 1.6 kW Machine weight approx.: 1.1 t Ledpfx Ahju Nfude Ujhl Machine dimensions (LxWxH) approx.: 1.1 x 0.5 x 2.1 m

Kondisi: bekas, Pressure 10 t Lhsdpfx Ahjd R Szue Usl Stroke 400 mm Downward speed from 200 mm/sec Upward speed 450 mm/sec Max. distance table - ram 630 mm Total power requirement 8.5 kW Machine weight approx. 1.3 t Space requirements approx. ... m - Without clamping plate - Approved only for operations with closed tooling

Tahun pembuatan: 1990, Kondisi: bekas, Pressure: 100 t Throat depth: 260 mm Stroke: 300 mm Table size: 500 x 500 mm Ram dimensions: 650 x 500 mm Ledpfx Ahob U Hvas Uohl Installation height: 700 mm Oil capacity: 600 l Ejector in table: 40 t Return force: 13 t Total power requirement: 22 kW Machine weight: approx. 7 t Space requirements: approx. 2.07 x 2.48 x 3.3 m - Table ejector, pressing force 40 t, stroke 100 mm - Sideways movable work area protection with BWS (safety light curtain), with cycle operation - Cooling system behind the machine, collecting tank (beige), air cooler (grey-blue), including complete piping and controls, etc. - Press certified for unrestricted manual loading operation - Last safety inspection/approval (UVV): Nov 2013 - Documentation available Demonstration under power not possible. Sale in as-is condition, no known defects. Due to the control system, commissioning by qualified personnel is recommended.

Tahun pembuatan: 1976, Kondisi: baik (bekas), nomor mesin/kendaraan: H 76-467, Gaya tekan: 160 kN Langkah plunger: 100 mm Tinggi pemasangan: 350 mm Lubang pada meja: 100 mm Lubang plunger: 32 mm Ruang bebas rangka: 650 mm Ukuran meja: 630 x 400 mm Tekanan hidrolik: 280 bar Koneksi listrik: 380 V, 5,5 kW Ljdpfsflrhzsx Ah Ujhl Ruang yang dibutuhkan: 1550 x 1050 x 2400 mm Berat kira-kira: 1,2 ton

Kondisi: baik (bekas), Pressure 63 t Stroke - 400 mm Installation height 700 mm Lodpfx Ahsch Dacj Ushl Table size 1800 x 500 mm MARCELS MACHINES CH

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 100 t, Durendus DCD-100 – Hydraulic Deep Drawing Press, C-frame, 15–100 t – 800 × 600 mm For sale: Hydraulic C-frame single-column deep drawing press from Durendus, featuring an adjustable press force of 15 to 100 t. The machine is designed for demanding forming, deep drawing, and assembly operations, and is equipped with an integrated deep drawing cushion and state-of-the-art Siemens control. Thanks to high operating speeds and precise control, it is suitable for both series production and flexible single-part applications. ==== Technical Data & Information: Hydraulic Single-Column Press – DCD-100 ==== General Specifications - Manufacturer: Durendus - Model: DCD-100 - Design: C-frame / Single-column press - Press force: 15–100 t (adjustable) - Total weight: approx. 6,500 kg - Dimensions (L×W×H): approx. 1,850 × 1,845 × 3,520 mm - Table height above floor: 1,000 mm ==== Working Area - Max. distance table–ram: 1,000 mm - Stroke: 0–700 mm (adjustable) ==== Table & Ram - Table size: 800 × 600 mm - Ram size: 800 × 600 mm - T-slots: DIN 650, 18 mm, cross arrangement ==== Speeds - Rapid approach speed: 180 mm/s - Working speed: 22 mm/s - Return speed: 180 mm/s ==== Hydraulics & Drive - Operating pressure: max. 250 bar Lhjdpeyw I T Hsfx Ah Usl - Main pump: Bosch Rexroth, approx. 65 l/min - Motor power: 11 kW + 1.5 kW - Oil tank volume: approx. 280 l - Hydraulic block: Duplomatic - Filter: Filtrec - Cooling: Air cooler ==== Additional Features - Deep drawing cushion: 50 t, stroke 250 mm, speed 50 mm/s - Ram ejector: 10 t, stroke 100 mm ==== Control & Operation - PLC: Siemens S7-1200 - Touch panel: Siemens SIMATIC 10" - Programmable: up to 99 programs - Adjustable: pressure, stroke, speed, lubrication - Positioning accuracy: up to 0.1 mm - Remote maintenance possible ==== Safety & Equipment - Two-hand operation - Safety PLC - Monitoring of all operating states via display - Oil temperature and filter monitoring - Automatic shutdown in case of overheating ===== Deep drawing, forming, assembly work, punching processes, series production, toolmaking Single-column press, C-frame press, deep drawing press, hydraulic press, industrial press, die-setting press, tryout press, tool try-out press Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), the EC standards and EU safety regulations. Moreover, our presses exceed Canadian and European safety requirements as they fully comply with all aspects of the Brazilian national safety directive NR 12, which builds on these standards. Our core strength lies in custom machine building and press automation. We supply customised hydraulic presses at surprisingly affordable prices. The hydraulic systems are primarily equipped with components from leading European manufacturers.

Tahun pembuatan: 1979, Kondisi: bekas, nomor mesin/kendaraan: 3534, Pressing force: 630 kN Return force: 100 kN Max. ram stroke: 200 mm Installation height: 400 mm Throat depth approx.: 350 mm Table size: 610 x 800 mm Table through-hole: 100 mm Ram bore: 40 mm Ram advance speed: 350 mm/s Ram pressing speed: 18 mm/s Ram return speed: 380 mm/s Lhsdpeb Hk Dzjfx Ah Uol Hydraulic drive: 380 V, 15 kW Space requirement: 1800 x 920 x 2440 mm Weight: 3.94 t