Kondisi: belum diuji (bekas), Tahun pembuatan: 2009, Fungsionalitas: belum diuji, jumlah sumbu: 4, panjang meja: 4.300 mm, lebar meja: 2.200 mm, jumlah spindel: 40, diameter alat: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X direction: 6 Number of spindles for horizontal drilling in Y direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Hedpfx Ageyq Ez Ts Rjni Table dimensions: 4,300 x 2,200 mm Number of positions in tool magazine 1: 22 Number of positions in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT Automatic panel loading system Automatic panel stacking system Lifting table Transport system Vacuum pump Note: The safety fences at the rear and at the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection, and assumes responsibility for installation, securing, and use of the machine at the final destination. External reference: 7087

Kondisi: belum diuji (bekas), Tahun pembuatan: 2011, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 6.200 mm, jarak lintasan sumbu Y: 1.935 mm, tinggi benda kerja (maks.): 250 mm, jumlah sumbu: 4, jumlah spindel: 40, TECHNICAL DETAILS Hnedpsyqzrnofx Ag Rei Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Panel thickness for edge banding unit: 14 - 60 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool changer positions: 22 Number of suction traverse beams: 10 Milling unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Gluing unit Tool magazine Grooving unit Number of positions in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Chip conveyor The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, safety measures, and operation of the machine at the place of use. External reference: 8011

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, nomor mesin/kendaraan: 3005, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.700 mm, jarak lintasan sumbu Y: 1.870 mm, panjang meja: 3.756 mm, lebar meja: 1.892 mm, Perlengkapan: Penandaan CE, DETAIL TEKNIS Area kerja Sumbu X: 3.700 mm Area kerja Sumbu Y: 1.870 mm Panjang meja: 3.756 mm Lebar meja: 1.892 mm Sistem penjepit alat: HSK-F63 Jumlah posisi penukar alat: 18 pcs DETAIL MESIN Sistem/Perangkat lunak: SCM Maestro Dimensi & Berat Hjdpfx Aoyuyf Usg Roni Dimensi (P x L x T): 6.100 mm x 2.600 mm x 2.450 mm Berat mesin: 4.160 kg PERLENGKAPAN Manual pengguna Diagram kelistrikan Penandaan CE Sertifikat CE Alat bor Bumper Pompa vakum

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, daya: 18 kW (24,47 hp), jarak pergerakan sumbu X: 3.300 mm, jarak lintasan sumbu Y: 1.280 mm, jarak gerak sumbu Z: 250 mm, jumlah spindel: 16, DETAIL TEKNIS Area kerja Sumbu X: 3.300 mm Area kerja Sumbu Y: 1.280 mm Area kerja Sumbu Z: 250 mm Jarak gerak Sumbu X: 4.000 mm Jarak gerak Sumbu Y: 1.670 mm Jarak gerak Sumbu Z: 500 mm Jumlah spindle bor horizontal: 4 unit Jumlah spindle bor vertikal: 12 unit DETAIL MESIN Tegangan: 400 V Konsumsi arus: 40 A Hsdpfeyux I Ujx Ag Roni Daya: 18 kW Jumlah paket transportasi: 2 PERLENGKAPAN Dokumentasi Penandaan CE Sistem penjepit alat HSK-F63 Alat bor Unit gergaji

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, daya: 20 kW (27,19 hp), tegangan masuk: 415 V, arus masuk: 50 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 1.000 mm, tinggi benda kerja (maks.): 80 mm, Perlengkapan: dokumentasi / manual, Wir bieten dieses gebrauchte WEEKE OPTIMAT BHX 500 Durchlauf-Bearbeitungszentrum, Baujahr 2007, zum Verkauf an. Das Homag Weeke Optimat BHX 500 ist ein kompaktes CNC-Horizontalbohrzentrum, das für die hochpräzise Bearbeitung von Möbelplatten, Korpus- und Bauteilen im Möbel- und Innenausbau konzipiert ist. Das horizontale Bearbeitungskonzept ermöglicht eine effiziente Bearbeitung bei geringem Platzbedarf sowie eine hohe Produktionsgeschwindigkeit und Präzision. _____ Hauptmerkmale • Horizontales CNC-Bohrzentrum für effiziente Plattenbearbeitung • Große Bearbeitungskapazität • Hohe Achsgeschwindigkeiten für schnelle Bearbeitungszyklen • Integriertes Spannsystem für präzise Werkstückpositionierung • Ausgelegt zum Bohren, Fräsen und Nuten • Gefertigt von HOMAG / Weeke, einem führenden Hersteller von CNC-Holzbearbeitungsmaschinen _____ Achsgeschwindigkeiten • X-Achse: bis zu 138 m/min • Y-Achse: bis zu 80 m/min • Z-Achse: bis zu 50 m/min • Pressplattenachse: 27 m/min _____ Werkstückabmessungen • Länge: min. 300 mm, max. 2500 mm • Breite: min. 100 mm, max. 1000 mm • Dicke: min. 4 mm, max. 80 mm _____ Maschinenabmessungen • Länge: ca. 6500 mm • Breite: ca. 2300 mm • Höhe: ca. 2700 mm _____ Elektrischer Anschluss • Betriebsspannung: 3 × 415 V ±5 % • Frequenz: 50 Hz • Gesamtanschlusswert: ca. 19,5 kW Hnjdpfeyr Utnsx Ag Rei • Empfohlene Absicherung: 50 A _____ Pneumatik • Mindestdruck: 7 bar • Luftverbrauch: ca. 2500 NL/min _____ Absaugung • Absaugstutzen: 2 × 280 mm • Erforderliche Luftmenge: mind. 4450 m³/h • Unterdruck: ca. 3000 Pa _____ Für weitere Fragen oder Informationen stehen wir Ihnen jederzeit gerne telefonisch oder per Nachricht zur Verfügung.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, panjang benda kerja (maks.): 3.000 mm, lebar benda kerja (maks.): 1.300 mm, tinggi benda kerja (maks.): 80 mm, Wir bieten diese sehr gut erhaltene Morbidelli Uniflex HP Durchlaufbohr- und Fräs-CNC, Baujahr 2016, an. Hersteller: Morbidelli Modell: Uniflex HP Baujahr: 2016 Zustand: sehr gut Kategorie-ID: 2074 Typen-ID: 151 Maschinentyp: Durchlaufbohr- und Fräs-CNC Hsdpjyr Ugusfx Ag Reni Die Morbidelli UNIFLEX HP ist ein Hochleistungs-Bohr- und Fräszentrum mit CNC-Steuerung, speziell entwickelt für die präzise Plattenbearbeitung in der Möbel- und Korpusfertigung. Sie ermöglicht das Bohren auf mehreren Flächen eines Werkstücks und präzise Fräsarbeiten bei minimalen Rüstzeiten, dank automatischer Spanntechnik und CNC-Steuerung. Wesentliche Merkmale • 6-Seiten-Bearbeitung durch obere und untere Bearbeitungseinheiten • Bis zu 134 unabhängige Bohrspindeln für höchste Produktivität • RO.AX Rotoaxial-Spindeltechnik für spielfreie und extrem präzise Bohrungen • Zwei unabhängige Spannsysteme minimieren Rüstzeiten und ermöglichen gleichzeitige Bearbeitung • Bearbeitung von zwei übereinanderliegenden Platten gleichzeitig möglich • Integriertes Sägeblatt in X-Achse für Zuschnittarbeiten • Besonders stabile, geschweißte O-Rahmen-Konstruktion für maximale Steifigkeit und Präzision • CNC-gesteuerter Plattenvorschub mit bürstenlosen Motoren und Kugelumlaufspindeln • Xylog Plus 2 CNC-Software mit PC-Schnittstelle Bohrsystem • 96 vertikale Bohrspindeln (48 oben + 48 unten) • Horizontale Bohrspindeln: o 8 + 8 in X-Richtung o 4 + 2 in Y-Richtung • Max. Spindeldrehzahl: 6.000 U/min • Integriertes Sägeblatt in X-Achse: o Durchmesser: 125 mm o Drehzahl: 7.500 U/min CNC-Steuerung & Software • Industrie-PC mit Windows-Betriebssystem • 17" Farbdisplay mit Tastatur • Xylog Plus 2 Programmiersoftware • Programmieroptionen: Parametrische Programmierung • DXF- und ASCII-Import • Simulation und Optimierung der Bohrzyklen Plattenkapazität • Plattenlänge: 250 – 3000 mm • Plattenbreite: 70 – 1300 mm • Plattendicke: 10 – 80 mm • Max. Plattengewicht: 100 kg Achsgeschwindigkeiten • X-Achse: 120 m/min • Y-Achse: 35 m/min • Z-Achse: 30 m/min Maschinenanforderungen • Druckluft: 6,5 bar • Durchschnittlicher Luftverbrauch: 500 Nl/min • Absaugleistung: o Obere Einheit: 5.000 m³/h o Untere Einheit: 2.250 m³/h Zusätzliche Ausstattung • Plattenlängen-Messeinrichtung • Schaltschrank mit Klimatisierung • Manuelle Be- und Entladestation mit Querförderbändern Für Rückfragen oder weitere Informationen kontaktieren Sie uns gerne telefonisch oder per Nachricht.

Kondisi: bekas, Tahun pembuatan: 2006, Area kerja X-Y-Z: 5300 x 1700 x 180 mm Panjang lintasan X-Y-Z: 6040 x 1810 x 280 mm Kepala bor dengan 30 + 8 spindle Kecepatan putar: 6000 rpm Daya: 2,2 kW Pelumasan sentral otomatis Meja kerja TV dengan 10 penyangga L=1500 4 area kerja 2 laser silang Pompa vakum 250 m³/jam Kontrol PC Windows Unit frais vertikal ISO 30, 7,5 kW dengan penukar alat RAPID 14 dan poros vektor Unit bor tambahan (poros E) Dongle untuk perangkat lunak XILOG Lokasi penyimpanan: Nattheim Hnjdpfsx Twd Hjx Ag Rji

Kondisi: bekas, Tahun pembuatan: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis travel length: 200 mm. Clearance height: 180 mm. The machine base is a monolithic construction made from thick-walled steel, reinforced throughout the machine bed with welded-in triangular plates for exceptional stability. The triangular design, particularly with a broad base for load-bearing components, is key to ensuring long-term precision and rigidity. The machine layout allows users optimal workflow with minimal space requirements. This chassis design provides the machining unit with a balanced and secure foundation, enabling outstanding load distribution. Hnjdpfox Twdyex Ag Rei The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on precision-ground prism guides using recirculating ball carriages. The working unit, mounted on it, also travels on prism guides and recirculating ball carriages for robust performance. Description of aggregates and standard accessories Drilling unit: Drill head with 10 + 4 spindles: · 6 individually selectable vertical spindles in X · 4 individually selectable vertical spindles in Y · 2 horizontal spindles in X (1+1) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Pitch: 32 mm · Drill holder: M10 with 11 mm centering · Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): · Tool holder: HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) · Clockwise/anti-clockwise operation · Ceramic bearings · Included: 4 tool holders (right-hand), without collet Tool changer: · Lateral tool magazine, 7-fold (TR7), fully enclosed against chip contamination · 7 tool slots for HSK 63F tool holders, arranged in a row · Max. tool diameter: D=120 mm · Max. weight per tool holder: 4.5 kg · Max. total tool weight (TR7): 20 kg · Angle heads can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter · 1 output for collets 3-20 mm (ER32) · 1 output for saw/collet 3-12 mm (ER20) (for saw blade D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. front milling tool diameter: 20 mm · Max. front milling tool length: 110 mm · Max. rear milling tool diameter: 12 mm · Max. rear milling tool length: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER32): 50 mm · Saw blade arbor diameter (ER20): 12 mm Work table: The work table is designed to provide the operator with maximum freedom of movement. The vacuum quick-clamping system allows for highly flexible, precise positioning and optimal workpiece holding. · 4 supports, 900 mm, steplessly manually adjustable in X · 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) · 2 stops in X (left/right) · 1 stop in Y per support (6 in total) · Retractable reference stops, CNC-controlled · Includes: 4 plug-in adapters for vacuum cups · Standard pendulum processing (2 working zones) Axis movement: The X, Y, and Z axes are driven via precision-ground recirculating ball screws of the highest accuracy. The X-axis ball screw is centrally located for maximum performance.

Kondisi: bekas, Tahun pembuatan: 2006, en Hnedpfx Aex Twccog Rsi

Kondisi: bekas, Tahun pembuatan: 2011, · Working area: 2,550 x 1,067 mm · Travel path X-Y: 2,980 x 1,450 mm · Z-axis travel length: 150 mm · Clearance height: 120 mm Drilling Unit F14: · Drill head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Pitch: 32 mm · Drill holder: M10 with 11 mm fitting · Pneumatic feed stroke: 60 mm Grooving Saw Unit in X: Hnodjyuw T Nopfx Ag Roi · Integrated in the drill head · Grooving saw blade with diameter up to max. 120 mm Main Milling Unit: · Tool holder HSK 63F · Stepless speed 1,500 – 24,000 rpm via inverter · Motor power 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power 7.5 kW (10 HP) from 12,000 rpm (S6) · Reversible direction · Ceramic bearings · Prepared for the use of angle gearboxes Tool Changer TR10: Automatic lateral tool change system for 10 tools. · Number of tool positions: 10 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight of all tools: 28 kg A central extraction nozzle combines all processing units into a single 200 mm connection. As a result, the required extraction capacity is reduced to approx. 3,200 m³/h. Work Table TVF: The work table is designed to guarantee the operator maximum freedom of movement. The quick-action vacuum clamping system ensures maximum flexibility with exact positioning and optimal holding of the workpieces. · 4 TVF support rails, L=1,100 mm, continuously adjustable in X · 12 TVF vacuum suction pads, 120 x 120 mm, continuously adjustable in Y · 2 stops in X (1 left / 1 right) · 1 stop in Y per support rail (total 4 pcs.) · Retractable reference stops are CNC controlled Automatic Central Lubrication: An electronic CNC control device distributes the correct amount of grease (X, Y, Z axes) Vacuum System (Base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. vacuum (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in operator’s native language Safety devices with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Supply: 400 V 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction connector diameter: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Vacuum: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF support rails L=1,100 mm and 18 vacuum suction pads 120 x 120 mm Cross laser for positioning the vacuum suction pads Two cross lasers mounted on the unit carrier facilitate easy positioning of the vacuum suction pads. Location: Nattheim

Kondisi: bekas, Tahun pembuatan: 2018, Delivery time approx. 5 months. Machine from a training facility – EXCELLENT condition, low operating hours (edge banding unit unused). Without tooling. Additional costs for dismantling / delivery / installation and commissioning / training. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding – Made for You This CNC machining center is equipped with a rich selection of edge banding tools to meet all woodworking requirements. MAIN ADVANTAGES - Powerful, with advanced H80C edge-banding unit, drilling spindles with 8,000 rpm, and market-leading spindle technology, offering over 1,000 hours of maintenance-free operation - Superior and generously equipped; suction cups can be positioned and configured using the FLEX worktable to optimally suit requirements - Easier and more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies "MAESTRO EDGE" - Simple operation: lowered frame for full accessibility to the worktable, integrated control cabinet and vacuum pump, and no safeguarding elements required in the PRO SPACE configuration Base Structure: The base structure is a monolithic construction made from thick-walled steel, reinforced with welded box plates along the entire machine bed, delivering extreme rigidity. The bed design, with a broad base, is key to ensuring long-term precision and stability. The supporting frame features an exceptionally robust, monolithic steel base with heavy ribbing for outstanding stiffness. The exceptionally wide footprint was specially designed to provide stability to the machine, ensuring ongoing precision regardless of working conditions – the machine does not need to be anchored to the floor. The base forms a large and solid mounting surface for the mobile gantry: the machining unit is therefore provided with a balanced, stable, and resilient support, capable of withstanding high loads for superior performance and greater accuracy. The mobile gantry consists of a solid single-piece attached to the base, gliding on prism guides with recirculating ball-bearing carriages of the highest quality. The machining unit is mounted on it and travels along the Y and Z axes on prismatic guides with ball carriages. Movement of the lower mobile unit (X-axis) and the working unit along the bar of the mobile unit (Y-axis) is achieved via helical rack and pinion drive, providing increased tooth engagement for higher acceleration and greater axis speed (X and Y). The specially designed helical gearing ensures reduced wear of mechanical components and lower noise levels. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and supporting strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for absolute machining quality. Hodpsyuw Srefx Ag Rsni

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Axle 920 mm X-axis 3000 mm Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: X = 300 mm Y = 120 mm Z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Hnjdpefmdcqofx Ag Rji Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade operates in the X-direction Maximum groove depth with saw blade: 10 mm Motor: 0.75 HP, 400 Volt Required extraction capacity: 2300 m³/h Location: arriving in stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 3300x2100x2100 mm Hodpfxsv A Hads Ag Roni Weight: 1500 kg Total power requirement: 14 kW CNC machining center ROUTERMAX 1325 ECO - Working area X-axis: 1300 mm - Working area Y-axis: 2500 mm - Working area Z-axis: 300 mm - Router spindle, water-cooled, 4.5 kW each, ER 25 with CHILLER CW 3000 cooling unit - Spindle speed, stepless up to 22,000 rpm - Drive system (X & Y axes): rack and pinion drive - Drive system (Z axis): ball screw drive - Drive motors: stepper motors - Max. traversing speed: 22 m/min - Max. working speed: 15 m/min - Working accuracy: 0.05 mm - Vacuum grid table with 4 zones and T-slots - Vacuum pump 5.5 kW, dry-running, air-cooled - Tool length sensor - Controller: DSP type NK 105 (MACH3 option) - Interface: USB - CAD/CAM software: Vectric Cut2D PRO (NESTING included) - Electrical connection: 3 phase, 400 V, 50 Hz - Operating ambient temperature: 0-45°C - Width: 2100 mm - Length: 3300 mm - Weight: 1500 kg

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Data Umum Berat mesin: 4300 kg Pergerakan Gerakan Sumbu X: 3860 mm Gerakan Sumbu Z: 185 mm Gerakan Sumbu Y: 1793 mm Hnjdpfsx D Inzsx Ag Roi Penggerak Utama Jumlah sumbu: 3 Kecepatan spindle: 24.000 RPM Daya motor spindle: 17 kW Weeke CE OPTIMAT BHC VENTURE 3 3-sumbu ini diproduksi pada tahun 2002. Dilengkapi motor utama bertenaga 17 kW dan kecepatan spindle maksimum 24.000 rpm. Area kerja berukuran 3250 × 1250 × 1215 mm, dengan kecepatan rapid traverse 100/50/20 m/menit. Ideal untuk berbagai pekerjaan CNC kayu, mesin ini membutuhkan udara tekan 7 bar serta kapasitas ekstraksi debu 3170 m³/jam. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Pengolahan Kayu CNC

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jarak pergerakan sumbu X: 3.600 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.000 mm, jumlah sumbu: 6, kecepatan spindel (maks.): 24.000 rpm, en Hnsdpjyuf D Njfx Ag Roi

Kondisi: bekas, Tahun pembuatan: 2009, Maximum workpiece length: 4,500 mm Milling spindle: 1 unit Main motor: 20 kW Control: Siemens Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamping table, 2 x 2,280 mm ----- Workpiece length: 200–4,500 mm Machining of workpieces over 2,700 mm in length is carried out via a follow-on/secondary cycle. Main spindle 1: ----- Motor with brake: 20 kW HSK 63F Speed electronically adjustable: 2,000–18,000 rpm Max. tool length from reference plane HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of positions: 30 Slot pitch: 100 mm Multi-spindle drilling head, permanently installed ----- For horizontal and vertical drilling and milling operations without tool change ----- Price ex location Hnjdpowunwyjfx Ag Rji Prices for dismantling and loading onto customer’s truck, domestic and international transport, reassembly, commissioning, and, if required, engineering of new profiles upon request! Including used tools (drawings available on request!): ----- Wood: IV 68, 78, 88, inward and outward opening, with attached weather bar Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift-slide doors IV 68 and 78 Entrance doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical data according to manufacturer—no guarantee! Detailed technical description available on request!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jarak pergerakan sumbu X: 4.140 mm, jarak lintasan sumbu Y: 1.270 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis BIESSE Rover A 1242 was manufactured in 2021. It has a working area of 4140 mm in the X-axis, 1270 mm in the Y-axis, and 275 mm in the Z-axis. The machine is equipped with brushless motors and a PC-based control system for enhanced performance. If you are looking for high-quality CNC woodworking machinery, you should consider the BIESSE Rover A 1242 machine we offer for sale. Contact us for further details. • Working Area • Y (5-axis): 1270 mm • Y (4-axis): 1260 mm • Z (with vacuum modules H=74 mm): 230 mm • Z (with H=29 mm vacuum modules): 275 mm • Axes and Drives • X & Y: Rack and pinion drive; precision class 6 • Z: Ball screw with preloaded nut; ISO C7 precision class • Motors: Brushless motors with digital drives via Mechatrolink system • Control System and PC Hardware • Control: BH660 (PC-based) with WRT (Windows Real Time) technology • CPU: Intel Core i5 or higher • RAM: 16 GB • Storage: 256 GB SSD or higher • Display: 21.5-inch LCD color screen • Operating system: Windows with real-time process management extension • Connectivity: Ethernet card; USB ports • Electrical and Pneumatics • Power Supply: 380 / 400 / 415 V - 50/60 Hz Hnedjyt Rrvopfx Ag Rsi • Control Voltage: 24 V DC (stabilized power supply) • Cabinet Cooling: Air conditioning for operation up to 40°C (104°F) • UPS (Uninterruptible Power Supply): 7-10 minutes runtime for data backup • Workpiece Support (ATS System) • Workpiece supports: 8 ATS aluminum beams on linear guides • Module carriers: 24 carriers (132 × 132 × H41.5 mm) with pneumatic clamping • Setup assistant (SA): Manual positioning with LED indicators; ±1.5 mm accuracy • Vacuum zones: 2 independent working areas in X; 2 independent clamping areas in X • Software and Licensing • Primary software: NC-HOPS 7 MacroCAM • Safety and Maintenance • Safety system: Bumper system (front and rear) for immediate stop in the event of a collision • Protection: Transparent polycarbonate front panel and sound-absorbing cover • Lubrication: Automatic lubrication system for linear guides and rack/pinion Additional Equipment • Vacuum pumps (supported/optional): Up to two units, each 90/100 m³/h or 250 m³/h

Kondisi: bekas, Tahun pembuatan: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 – Drilling and Milling Made for You! This numerically controlled machining center is equipped with a wide range of accessories for milling and drilling to meet every woodworking requirement. Highly efficient – featuring drilling spindles with 8,000 rpm and industry-leading technology, the most robust spindle available on the market, with more than 1,000 maintenance-free cycles. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to tailor the machine precisely to your needs. Effortless and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. Easy to operate, with a lowered machine frame providing full access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural safety measures are required. Support Structure: The supporting structure features a particularly sturdy monolithic steel base, ribbed and highly robust. The extra-wide support surface is specifically designed to provide the machine with exceptional stability, ensuring consistent precision under all working conditions. Floor anchoring of the machine is not required. The base provides a large, solid mounting for the movable gantry: the working unit is fitted with a balanced, stable, and resilient support that withstands the highest stresses, resulting in superior workmanship and greater accuracy. The moving gantry consists of a single, solid piece anchored to the base and glides along high-grade prismatic guides with recirculating ball shoes. The working unit is attached and also moves along the Y and Z axes via prismatic guides with ball shoes. Movement of the lower moving unit (X-axis) and the working unit across the traverse of the gantry (Y-axis) is accomplished via helical rack-and-pinion drives, resulting in increased force per tooth for greater acceleration and higher travel speeds along the X and Y axes. The specially designed helical gearing ensures minimal wear of mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, providing perfect balance under dynamic loads and withstanding strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, ensuring high-quality finishing operations and eliminating vibration. X-Y-Z axis movements are driven by brushless motors powered by static inverters, offering: - Reduced processing times thanks to improved acceleration - Higher positioning accuracy thanks to high-resolution encoders - No set-up activities upon machine start-up due to absolute encoders Hnjdpsytrgzsfx Ag Rsi - No general maintenance required as the brushless system is brush-free Axis movement and general operation management is performed by...

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), Penggerak Utama Jumlah sumbu: 3 Pusat Pemesinan Kayu CNC 3-sumbu IMA BIMA CUT 145/330 ini diproduksi pada tahun 2014. Mesin ini memiliki jangkauan kerja 3300 mm pada sumbu X dan 1450 mm pada sumbu Y, dengan daya spindle 18 kW. Mesin ini dilengkapi dengan majalah alat hingga 18 posisi dan sistem penjepit vakum untuk fiksasi benda kerja yang aman. Jika Anda mencari kemampuan milling berkualitas tinggi, pertimbangkan mesin IMA BIMA CUT 145/330 yang kami tawarkan. Silakan hubungi kami untuk informasi lebih lanjut. Hnodpfxex D Nitj Ag Rei Jenis Aplikasi Pemrosesan Kayu CNC

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), Data Umum Berat mesin 6200 kg Penggerak Utama Rentang kecepatan spindle 8000–24000 rpm Jumlah sumbu 3 Pergerakan Pergerakan Sumbu X 3000 mm Pergerakan Sumbu Y 1200 mm Pergerakan Sumbu Z 100 mm Mesin 3-sumbu IMA BIMA 210 120/300 ini diproduksi pada tahun 2006. Mesin ini memiliki lintasan sumbu yang besar (X = 3000 mm, Y = 1200 mm, Z = 100 mm), cocok untuk mengakomodasi benda kerja hingga 2800 mm panjang dan 1200 mm lebar. Spindle utama menawarkan daya 7,5 kW dengan kecepatan antara 8.000 hingga 24.000 rpm. Bobot mesin sekitar 6.200 kg dan dilengkapi dengan kontrol CNC IMA IMATRONIC. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Hsdpfxjx D Rt Hs Ag Roni Jenis Aplikasi Perkayuan CNC

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, daya: 19 kW (25,83 hp), jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.730 mm, jumlah spindel: 20, Jumlah stasiun alat di turret alat 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of traverses with suction: 8 Number of tool magazine slots: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling Unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid cooled MACHINE DETAILS Hnedpoyttf Sjfx Ag Roi Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety enclosure Note: Cones, cutters, and attachments are not included in the scope of delivery. Safety fences will be supplied as available (left side only). The machine is sold and delivered 'as is, where is', based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.550 mm, tinggi benda kerja (maks.): 40 mm, jumlah spindel: 30, kecepatan perjalanan (maks.): 80.000 mm/menit, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Max. workpiece height: 40 mm Number of suction beam traverses: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Hnjdpfx Agoyttcwj Roi Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of positions: 18 Tool magazine 2 Number of positions: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cone and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7350

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 1.300 mm, jumlah spindel: 21, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 60 m/menit, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,200 mm Travel range Y-axis: 1,300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Number of stations: 10 MACHINE DETAILS Total connected load: 26 kW EQUIPMENT Vacuum pump WINDOWS control system Hsdpfxeytr Ryj Ag Rsni WRT machine programming software Note: Collets and cutters are not included in the scope of delivery. Safety guards are supplied as available (right side guard is missing). The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 8174

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 8.879 h, jarak pergerakan sumbu X: 3.110 mm, jarak lintasan sumbu Y: 1.320 mm, jarak gerak sumbu Z: 180 mm, Kami menawarkan pusat pemesinan SCM Morbidelli m100 yang sangat bagus ini, tahun pembuatan 2020. Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirim pesan atau menghubungi kami. Hsdpoyc Ttnofx Ag Rsni

Kondisi: bekas, Tahun pembuatan: 2014, tinggi total: 2.800 mm, panjang total: 10.300 mm, lebar total: 2.450 mm, Empty weight: 6,600 kg Price: On request - Special features: - └ Description: The machine is currently not operational: Problem with the CAN bus system Hodpfx Ajytcl Isg Roni - Year of manufacture: 2014 - Documentation available: No - CE mark present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs]: 1 - Type of milling table: Beam table - Tool clamping system: HSK-F63 - Material clamping system: Pneumatic - Drilling tool included: Yes - Tool changer positions [pcs]: 24 - System/Software: Xilog Plus - Safety features: Safety light curtain, door interlock switch, safety fence - Vacuum pump included: Yes - └ Quantity [pcs]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil-free: Yes - Tools included: Yes - CNC options: Waste conveyor, handheld controller - CNC documentation included: USB stick - Table length [mm]: 5,200 - Table width [mm]: 1,300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10,300 mm x 2,450 mm x 2,800 mm (L x W x H) - Transport weight [kg]: 6,600 kg - Number of transport packages [pcs]: 1 Financial information VAT: The quoted price is exclusive of VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in at any time for all items in the industrial sector Glenn Smeets